prEN 4800-005
(Main)Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy forging stock. It is intended to be applied when referred to and in conjunction with the European material standard unless otherwise specified on the drawing, order or inspection schedule.
Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil 005: Schmiedevormaterial
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 005 : Produits destinés à la forge
Le présent document spécifie les exigences relatives aux commandes, à la fabrication, aux essais, au contrôle et à la livraison des produits destinés à la forge en titane et alliages de titane. Il doit être appliqué lorsqu'il est cité en référence et conjointement avec la norme de matériau EN, sauf spécification contraire figurant sur le dessin, la commande ou la fiche d'essais.
Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 005. del: Material za kovanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4800-005:2024
01-maj-2024
Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 005. del: Material za
kovanje
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005:
Forging stock
Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil
005: Schmiedevormaterial
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 005 :
Produits destinés à la forge
Ta slovenski standard je istoveten z: prEN 4800-005
ICS:
49.025.30 Titan Titanium
oSIST prEN 4800-005:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4800-005:2024
---------------------- Page: 2 ----------------------
oSIST prEN 4800-005:2024
DRAFT
EUROPEAN STANDARD
prEN 4800-005
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2023
ICS 49.025.30 Will supersede EN 4800-005:2010
English Version
Aerospace series - Titanium and titanium alloys -
Technical specification - Part 005: Forging stock
Série aérospatiale - Titane et alliages de titane - Luft- und Raumfahrt - Titan und Titanlegierungen -
Spécification technique - Partie 005 : Produits destinés Technische Lieferbedingungen - Teil 005:
à la forge Schmiedevormaterial
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4800-005:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4800-005:2024
prEN 4800-005:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Wording of order . 7
5 Health and safety . 7
6 Technical requirements . 7
6.1 General. 7
6.2 Qualification requirements . 8
6.3 Release requirements
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.