iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 28888:2013

(Main)

Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013)

Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013)

ISO 28888:2013 specifies a screening method for the erosion potential of non-fluoridated oral rinses on dental hard tissues. The results of the screening method are intended for use in enamel and/or dentine erosion models.

Zahnheilkunde - Screeningverfahren für das Erosionspotential von Mundwässern auf Zahnhartgewebe (ISO 28888:2013)

Diese Internationale Norm legt ein Screeningverfahren für das Erosionspotential von nicht fluoridhaltigen Mundwässern auf Zahnhartgewebe fest.
Die Ergebnisse des Screeningverfahrens sollen auf Schmelz- und/oder Dentinerosionsmodelle angewendet werden.

Médecine bucco-dentaire - Méthode de criblage de l'érosion potentielle des tissus durs dentaires due aux rinçages oraux (ISO 28888:2013)

L'ISO 28888:2013 spécifie une méthode de criblage du potentiel d'érosion des bains de bouche non fluorés sur les tissus durs dentaires. Les résultats de la méthode de criblage sont destinés à être utilisés dans des modèles d'érosion de l'émail et/ou de la dentine.

Zobozdravstvo - Presejalna metoda za morebitno erozijo zobnih trdih tkiv pri ustnih vodah za izpiranje (ISO 28888:2013)

General Information

Status
Published
Publication Date
01-Oct-2013
Withdrawal Date
29-Apr-2014
ICS
71.100.70 - Cosmetics. Toiletries
97.170 - Body care equipment
Technical Committee
CEN/TC 55 - Dentistry
Drafting Committee
CEN/TC 55 - Dentistry
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Oct-2013
Completion Date
02-Oct-2013
Directive
1223/2009 - Commission communication in the framework of the implementation of Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Ref Project
SIST EN ISO 28888:2014 - Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013)

Buy Standard

EN ISO 28888:2014EN ISO 28888:2014
PreviousNext
Standard
EN ISO 28888:2014
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28888:2014
01-februar-2014
Zobozdravstvo - Presejalna metoda za morebitno erozijo zobnih trdih tkiv pri
ustnih vodah za izpiranje (ISO 28888:2013)
Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues
(ISO 28888:2013)
Zahnheilkunde - Screeningverfahren für das Erosionspotential von Mundwässern (ISO
28888:2013)
Médecine bucco-dentaire - Méthode de criblage de l'érosion potentielle des tissus durs
dentaires due aux rinçages oraux (ISO 28888:2013)
Ta slovenski standard je istoveten z: EN ISO 28888:2013
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
71.100.70 .R]PHWLND7RDOHWQL Cosmetics. Toiletries
SULSRPRþNL
SIST EN ISO 28888:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 28888:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 28888:2014


EUROPEAN STANDARD
EN ISO 28888

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2013
ICS 97.170
English Version
Dentistry - Screening method for erosion potential of oral rinses
on dental hard tissues (ISO 28888:2013)
Médecine bucco-dentaire - Méthode de criblage de Zahnheilkunde - Screeningverfahren für das
l'érosion potentielle des tissus durs dentaires due aux Erosionspotential von Mundwässern auf Zahnhartgewebe
rinçages oraux (ISO 28888:2013) (ISO 28888:2013)
This European Standard was approved by CEN on 31 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28888:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 28888:2014
EN ISO 28888:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 28888:2014
EN ISO 28888:2013 (E)
Foreword
This document (EN ISO 28888:2013) has been prepared by Technical Committee ISO/TC 106 “Dentistry” in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the
latest by April 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 28888:2013 has been approved by CEN as EN ISO 28888:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 28888:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 28888:2014
INTERNATIONAL ISO
STANDARD 28888
First edition
2013-10-01
Dentistry — Screening method for
erosion potential of oral rinses on
dental hard tissu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 28399:2021(Main)
Dentistry - External tooth bleaching products (ISO 28399:2021)
SIST EN ISO 28399:2021

This document specifies the requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and manufacturer's instructions for use.
This document is not applicable to tooth bleaching products:
—     specified in ISO 11609;
—     intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;
—     auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE     Maximum concentration of a bleaching agent for professional or non-professional use is subject to each country's regulatory body.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17730:2020(Main)
Dentistry - Fluoride varnishes (ISO 17730:2020)
SIST EN ISO 17730:2020

This document specifies requirements and test methods for total digestible fluoride content and a minimum soluble fluoride release potential in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies packaging and labelling requirements, including the instructions for use. This document covers fluoride varnishes to be applied by dental health care workers.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11609:2017(Main)
Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
SIST EN ISO 11609:2017

ISO 11609:2017 specifies requirements for the physical and chemical properties of dentifrices and provides guidelines for suitable test methods. It also specifies requirements for the marking, labelling and packaging of dentifrices.
ISO 11609:2017 applies to dentifrices, including toothpastes, destined to be used by the consumers on a daily basis with a toothbrush to promote oral hygiene.
Specific qualitative and quantitative requirements for freedom from biological and toxicological hazards are not included in this document. These are covered in ISO 7405[1] and ISO 10993‑1[2].

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16408:2015(Main)
Dentistry - Oral care products - Oral rinses (ISO 16408:2015)
SIST EN ISO 16408:2015

ISO 16408:2015 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as the manufacturer's instructions for use, marking, and/or labelling requirements.
ISO 16408:2015 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.
ISO 16408:2015 is not applicable to oral rinses available by prescription only.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28399:2021(Main)
Dentistry - External tooth bleaching products (ISO 28399:2021)
SIST EN ISO 28399:2021

This document specifies the requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and manufacturer's instructions for use.
This document is not applicable to tooth bleaching products:
—     specified in ISO 11609;
—     intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;
—     auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE     Maximum concentration of a bleaching agent for professional or non-professional use is subject to each country's regulatory body.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17730:2020(Main)
Dentistry - Fluoride varnishes (ISO 17730:2020)
SIST EN ISO 17730:2020

This document specifies requirements and test methods for total digestible fluoride content and a minimum soluble fluoride release potential in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies packaging and labelling requirements, including the instructions for use. This document covers fluoride varnishes to be applied by dental health care workers.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11609:2017(Main)
Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
SIST EN ISO 11609:2017

ISO 11609:2017 specifies requirements for the physical and chemical properties of dentifrices and provides guidelines for suitable test methods. It also specifies requirements for the marking, labelling and packaging of dentifrices.
ISO 11609:2017 applies to dentifrices, including toothpastes, destined to be used by the consumers on a daily basis with a toothbrush to promote oral hygiene.
Specific qualitative and quantitative requirements for freedom from biological and toxicological hazards are not included in this document. These are covered in ISO 7405[1] and ISO 10993‑1[2].

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16408:2015(Main)
Dentistry - Oral care products - Oral rinses (ISO 16408:2015)
SIST EN ISO 16408:2015

ISO 16408:2015 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as the manufacturer's instructions for use, marking, and/or labelling requirements.
ISO 16408:2015 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.
ISO 16408:2015 is not applicable to oral rinses available by prescription only.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day