EN 3475-307:2010

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage

This test standard defines methods to cover the detection and measurement of partial discharge (corona) under an applied test voltage, including the determination of partial discharges (corona) inception and extinction voltages as the test voltage is raised and lowered, of electrical cables for aircraft use.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 307: Corona-Aussetzspannung

Diese Prüfnorm legt Verfahren fest, die den Nachweis und die Messung der Teilentladung (Corona) elektrischer
Leitungen für die Verwendung in Luftfahrzeugen unter einer angelegten Prüfspannung umfassen, einschließlich
der Bestimmung der Teilentladungs-(Corona-)einsetzspannung und -aussetzspannung, wenn die
Prüfspannung erhöht oder abgesenkt wird.
Sie muss in Verbindung mit EN 3475-100 angewendet werden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 307 : Tension d'extinction corona

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 307. del: Napetost koronske izgube

Ta preskusni standard definira metode, ki pokrivajo zaznavanje in merjenje delne razelektritve (korone) pod testno napetostjo, vključno z določevanjem delnih razelektritev (koron) začetka in ugasnitve napetosti, kadar je preskusna napetost dvignjena in spuščena, električnih kablov za uporabo v zračnih plovilih. Uporablja se skupaj z EN 3475-100.

General Information

• Status: Withdrawn
• Publication Date: 06-Jul-2010
• Withdrawal Date: 16-Jun-2015
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Jun-2015
• Ref Project: SIST EN 3475-307:2010 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage

Relations

• Replaces: EN 3475-307:2005 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
• Effective Date: 07-Nov-2009
• Replaced By: EN 3475-307:2015 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 307: Corona-AussetzspannungSérie aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 307: Tension d'extinction coronaAerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-307:2010SIST EN 3475-307:2010en01-september-2010SIST EN 3475-307:2010SLOVENSKI
STANDARDSIST EN 3475-307:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3475-307
July 2010 ICS 49.060 Supersedes EN 3475-307:2005English Version
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 307 : Tension d'extinction corona
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 307: Corona-Aussetzspannung This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-307:2010: ESIST EN 3475-307:2010
...