EN 2923:2019

Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C

This document specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, in heat resisting steel, silver plated.
Classification: 600 MPa/425 °C.

Luft- und Raumfahrt - Flache Sechskantmuttern, verringerte Höhe, kleine Schlüsselweite, aus hochwarmfestem Stahl, versilbert - Klasse: 600 MPa (bei Raumtemperatur)/425 °C

Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en acier résistant à chaud, argentés - Classification: 600 MPa (à température ambiante) / 425 °C

Aeronavtika - Matice, šestrobe, drsne, z zmanjšanim zevom ključa, iz toplotnoodpornega jekla, posrebrene - Klasifikacija: 600 MPa (pri okoljski temperaturi)/425 °C

Ta dokument določa lastnosti šestrobih drsnih matic zmanjšane višine, z zmanjšanim zevom ključa, iz toplotnoodpornega jekla, posrebrenih.
Klasifikacija: 600 MPa/425 °C.

General Information

• Status: Published
• Publication Date: 30-Jul-2019
• Withdrawal Date: 30-Oct-2019
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Apr-2019
• Completion Date: 03-Apr-2019
• Ref Project: SIST EN 2923:2019 - Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2923:2019
01-junij-2019
Aeronavtika - Matice, šestrobe, drsne, z zmanjšanim zevom ključa, iz
toplotnoodpornega jekla, posrebrene - Klasifikacija: 600 MPa (pri okoljski
temperaturi)/425 °C

Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat

resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C

Luft- und Raumfahrt - Flache Sechskantmuttern, kleine Schlüsselweite, aus
hochwarmfestem Stahl, versilbert - Klasse: 600 MPa (bei Raumtemperatur) / 425 °C

Série aérospatiae - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en

acier résistant à chaud, argentés - Classification: 600 MPa (à température ambiante) /

425 °C
Ta slovenski standard je istoveten z: EN 2923:2019
ICS:
21.060.20 Matice Nuts
49.030.30 Matice Nuts
SIST EN 2923:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2923:2019
---------------------- Page: 2 ----------------------
SIST EN 2923:2019
EN 2923
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 49.030.30
English Version
Aerospace series - Nuts, hexagon, plain, reduced height,
reduced across flats, in heat resisting steel, silver plated -
Classification: 600 MPa (at ambient temperature) / 425 °C

Série aérospatiae - Écrous hexagonaux ordinaires, Luft- und Raumfahrt - Flache Sechskantmuttern, kleine

hauteur réduite, surplats réduits, en acier résistant à Schlüsselweite, aus hochwarmfestem Stahl, versilbert -

chaud, argentés - Classification: 600 MPa (à Klasse: 600 MPa (bei Raumtemperatur) / 425 °C

température ambiante) / 425 °C
This European Standard was approved by CEN on 8 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2923:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2923:2019
EN 2923:2019 (E)
Contents
Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Required characteristics .............................................................................................................................. 4

5 Designation........................................................................................................................................................ 8

6 Marking ............................................................................................................................................................... 8

7 Technical specification .................................................................................................................................. 8

---------------------- Page: 4 ----------------------
SIST EN 2923:2019
EN 2923:2019 (E)
European foreword

This document (EN 2923:2019) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by
...