iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 24766:1992

(Main)

Slotted set screws with flat point (ISO 4766:1983)

Slotted set screws with flat point (ISO 4766:1983)

Specifies the characteristics of products with thread sizes from M 1,2 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,2 up to M 12 with nominal lengths from 2 mm up to 60 mm; gives an example for the designation.

Gewindestifte mit Schlitz und Kegelkuppe (ISO 4766:1983)

Vis sans tête, fendues, à bout plat (ISO 4766:1983)

La présente Norme internationale spécifie les caractéristiques des vis sans tête fendues, à bout plat, de grade A et de diamètre nominal de filetage M 1,2 à M 12 inclus. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898, ISO 965, ISO 3506.

Navojni zatiči z zarezo in posneto končino

General Information

Status
Withdrawn
Publication Date
23-Jul-1992
Withdrawal Date
23-Aug-2011
ICS
21.060.10 - Bolts, screws, studs
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Aug-2011
Completion Date
24-Aug-2011
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 24766:1996 - Slotted set screws with flat point (ISO 4766:1983)

Relations

Replaced By
EN ISO 4766:2011 - Slotted set screws with flat point (ISO 4766:2011)
Effective Date
15-Apr-2009

Buy Standard

EN 24766:1996EN 24766:1996
PreviousNext
Standard
EN 24766:1996
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gewindestifte mit Schlitz und Kegelkuppe (ISO 4766:1983)Vis sans tete, fendues, a bout plat (ISO 4766:1983)Slotted set screws with flat point (ISO 4766:1983)21.060.10Sorniki, vijaki, stebelni vijakiBolts,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7435:2024(Main)
Fasteners - Slotted set screws with dog point (ISO 7435:2024)
SIST EN ISO 7435:2024

This document specifies the characteristics of slotted set screws with long dog point for regular standard lengths and with short dog point for short standard lengths, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7434:2024(Main)
Fasteners - Slotted set screws with cone point (ISO 7434:2024)
SIST EN ISO 7434:2024

This document specifies the characteristics of slotted set screws with cone point, in steel and stainless steel, with metric coarse pitch threads M1,2 to M12, and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7436:2024(Main)
Fasteners - Slotted set screws with cup point (ISO 7436:2024)
SIST EN ISO 7436:2024

This document specifies the characteristics of slotted set screws with cup point, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5, or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4766:2024(Main)
Fasteners - Slotted set screws with flat point (ISO 4766:2024)
SIST EN ISO 4766:2024

This document specifies the characteristics of slotted set screws with flat point, in steel and stainless steel, with metric coarse pitch threads M1,2 to M12, and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7380-2:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
SIST EN ISO 7380-2:2023

This document specifies the characteristics of hexagon socket button head screws with collar, with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If in certain cases other specifications are requested, dimensional options can be selected from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7380-1:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
SIST EN ISO 7380-1:2023

This document specifies the characteristics of hexagon socket button head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If, in certain cases, other specifications are requested, stainless steel grades can be selected from ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14581:2023(Main)
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)
SIST EN ISO 14581:2023

This document specifies the characteristics of hexalobular socket countersunk flat head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M10, and with product grade A.
If in certain cases other specifications are requested, stainless steel grades can be selected from ISO 3506‑1, and dimensional options from ISO 888 or ISO 4753.
NOTE 1   The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 3.
NOTE 2   Hexalobular socket countersunk head screws (high head), with full loadability are specified in ISO 14582, but these products are not interchangeable, because of different head heights.
NOTE 3   Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2702:2022(Main)
Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
SIST EN ISO 2702:2023

This document specifies the mechanical and physical properties of heat treated tapping screws made of steel, with thread sizes ST2,2 to ST9,5 in accordance with ISO 1478, when tested at the ambient temperature range of 10 °C to 35 °C, and the related test methods.
Tapping screws are designed to form mating threads in sheet metals, without their own threads being deformed. Tapping screws are not intended to be pretensioned by design, even though they can experience varying degrees of low-level tensile stress after installation.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8676:2022(Main)
Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)
SIST EN ISO 8676:2022

This document specifies the characteristics of hexagon head screws, in steel and stainless steel, with metric fine pitch threads M8×1 to M64×4, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4015:2022(Main)
Fasteners - Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) - Product grade B (ISO 4015:2022)
SIST EN ISO 4015:2022

This document specifies the characteristics of hexagon head bolts with reduced shank (shank diameter approximately equal to pitch diameter), in steel and stainless steel, with metric coarse pitch threads M3 to M20, and with product grade B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.
NOTE      For hexagon head bolts with full shank, see ISO 4014.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day