FprEN 14904 rev
(Main)Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
This European Standard specifies requirements for multi-sports surfaces designed for use in indoor sport halls and gymnasia and used for example one or more of the following sports: volleyball, basketball, badminton, small sided football, handball, physical education...
It provides for the evaluation of conformity of products, which include their upper (playing) surface and supporting layers, whether prefabricated or constructed in situ or a combination of the two.
This European Standard does not apply to synthetic turf or textile surfaces used indoors.
Sportböden - Mehrzweck-Sporthallenböden - Anforderungen
Diese Europäische Norm legt Anforderungen an Mehrzweck-Sportbodensysteme fest, die für die Verwendung in Sport- und Turnhallen ausgelegt sind
Diese Norm gilt auch für Einrichtungen, die nur für eine der folgenden Sportarten vorgesehen sind: Volleyball, Basketball, Badminton, Kleinfeldfußball und Handball.
ANMERKUNG Sportunterricht wird als Mehrzwecknutzung verstanden.
Diese Norm enthält die Bewertung und Überprüfung der Leistungsbeständigkeit von Sportbodensystemen, die entweder vorgefertigt oder vor Ort gefertigt sind oder durch Kombinieren beider Verfahren gefertigt werden.
Diese Europäische Norm gilt nicht für Kunststoffrasen oder textile Beläge für Hallen.
Sols sportifs - Sols multi-sports intérieurs - Spécification
La présente Norme européenne définit les exigences relatives aux systèmes sols multisports conçus pour être utilisés dans les salles de sport et les gymnases intérieurs.
Elle s'applique également aux installations conçues pour les sports suivants : le volley-ball, le basket-ball, le badminton, le football en salle et le handball.
NOTE L'éducation physique est considérée comme une pratique multisport.
La présente Norme décrit les procédures d'évaluation et de vérification de la conformité des performances d'un système sol sportif, qu'il soit préfabriqué, construit in situ, ou conçu à partir d'une combinaison de ces deux procédés.
La présente Norme européenne ne s'applique pas aux surfaces en gazon synthétique ou en textile utilisées en intérieur.
Podloge za športne dejavnosti - Notranje podloge za večnamensko uporabo - Specifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14904:2014
01-maj-2014
3RGORJH]DãSRUWQHGHMDYQRVWL1RWUDQMHSRGORJH]DYHþQDPHQVNRXSRUDER
6SHFLILNDFLMD
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Sportböden - Mehrzweck-Sporthallenböden - Anforderungen
Sols sportifs - Sols multi-sports intérieurs - Spécification
Ta slovenski standard je istoveten z: prEN 14904 rev
ICS:
97.220.10 Športni objekti Sports facilities
oSIST prEN 14904:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 14904:2014
oSIST prEN 14904:2014
EUROPEAN STANDARD
DRAFT
prEN 14904 rev
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2014
ICS 97.220.10 Will supersede EN 14904:2006
English Version
Surfaces for sports areas - Indoor surfaces for multi-sports use -
Specification
Sols sportifs - Sols multi-sports intérieurs - Spécification Sportböden - Mehrzweck-Sporthallenböden -
Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 217.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14904 rev:2014 E
worldwide for CEN national Members.
oSIST prEN 14904:2014
prEN 14904:2014 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .6
4 Characteristic of installation .6
5 Essential characteristics .6
5.1 Reaction to fire .6
5.1.1 Specimen preparation and conditioning .6
5.1.2 Application rules .7
5.1.3 Classification .7
5.1.4 Product parameters influencing reaction to fire performance . 10
5.2 Emission of formaldehyde . 10
5.3 Emission of pentachlorophenol . 11
5.4 Release of other dangerous substances . 11
5.5 Linear friction . 11
5.6 Shock absorption. 11
5.7 Resistance to rolling load . 12
5.8 Resistance to wear . 12
6 Other characteristics . 12
6.1 General . 12
6.2 Vertical ball behaviour . 12
6.3 Vertical deformation . 12
6.4 Specular reflectance . 12
6.5 Specular gloss . 12
6.6 Resistance to indentation . 12
6.7 Resistance to impact . 13
7 Positioning of test apparatus on sample . 13
8 Requirements for site testing . 14
8.1 General . 14
8.2 In situ testing conditions . 14
8.3 Requirements . 14
8.4 Positioning of test apparatus on site. 14
9 Test reports . 14
9.1 General . 14
9.2 Laboratory test report . 14
9.3 In situ test report. 15
10 Assessment and verification of constancy of performance - AVCP . 15
10.1 General . 15
10.2 Type testing . 16
10.2.1 General . 16
10.2.2 Test samples, testing and compliance criteria . 16
10.2.3 Test reports . 17
10.2.4 Shared other party results . 17
10.2.5 Cascading determination of the product type results . 17
10.3 Factory production control (FPC) . 18
10.3.1 General . 18
10.3.2 Requirements . 18
oSIST prEN 14904:2014
prEN 14904:2014 (E)
10.3.3 Product specific requirements . 20
10.3.4 Initial inspection of factory and of FPC . 21
10.3.5 Continuous surveillance of FPC . 22
10.3.6 Procedure for modifications . 22
10.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very
low quantity . 22
11 Marking and labelling . 23
Annex A (informative) Test Method to define the sport floor type . 24
Annex B (informative) Typical Shock absorption and vertical deformation values . 25
Annex C (informative) Resistance to repeated impact of synthetic sports floors . 26
C.1. General. 26
Annex D (normative) Determination of pentachlorophenol in sport floor systems . 27
D.1. Principle of test . 27
D.2. Apparatus and materials . 27
D.3. Sampling and specimen preparation . 27
D.4. Sample extraction and analysis . 27
D.5. Expression of results . 27
Annex E (informative) Rotational friction . 28
Annex F (informative) Positioning of test apparatus on sample (Area deflection Wx) . 29
F.1. Principle . 29
F.2. Apparatus . 29
F.2.1 Apparatus for the deformation of the vertical deformation acc. to EN 14809. . 29
F.2.2 Sensors, eg. electronic pick-ups acc. to EN 14809. . 29
F.2.3 Separate stand for the sensors. . 29
F.3. Procedure . 29
Annex G (informative) Measuring points on sample . 30
G.1. Area-elastic sports floor with elastic construction . 30
G.1.1 Key . 30
G.1.2 Positioning of the system measuring spots . 30
G.2 Area-elastic sports floor with elastic construction . 32
G.2.1 key . 32
G.2.2 Positioning of the system measuring spots . 33
G.3. Area-elastic sports floor with elastic construction . 34
G.3.1 Key .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.