prEN ISO/IEC 17067
(Main)Conformity assessment - Fundamentals of and guidelines for conformity assessment schemes (ISO/IEC DIS 17067:2025)
Conformity assessment - Fundamentals of and guidelines for conformity assessment schemes (ISO/IEC DIS 17067:2025)
ISO/IEC 17067 describes the fundamentals of product certification and provides guidelines for understanding, developing, operating or maintaining certification schemes for products, processes and services.
ISO/IEC 17067 is intended for use by all with an interest in product certification, and especially by certification scheme owners.
Konformitätsbewertung - Grundlagen und Leitlinien für Konformitätsbewertungsprogramme (ISO/IEC DIS 17067:2025)
Évaluation de la conformité - Éléments fondamentaux et lignes directrices pour les systèmes particuliers d’évaluation de la conformité (ISO/IEC DIS 17067:2025)
L'ISO/IEC 17067 décrit les principes essentiels de la certification de produits et fournit des lignes directrices permettant de comprendre, développer, exploiter ou maintenir des programmes de certification de produits, de processus et de services.
L'ISO/IEC 17067 est prévue pour être utilisée par tous ceux pour qui la certification de produits présente un intérêt et en particulier les propriétaires de programmes de certification.
Ugotavljanje skladnosti - Osnove in smernice za sheme ugotavljanja skladnosti (ISO/IEC DIS 17067:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Ugotavljanje skladnosti - Osnove in smernice za sheme ugotavljanja skladnosti
(ISO/IEC DIS 17067:2025)
Conformity assessment - Fundamentals of and guidelines for conformity assessment
schemes (ISO/IEC DIS 17067:2025)
Konformitätsbewertung - Grundlagen und Leitlinien für
Konformitätsbewertungsprogramme (ISO/IEC DIS 17067:2025)
Évaluation de la conformité - Éléments fondamentaux et lignes directrices pour les
systèmes particuliers d’évaluation de la conformité (ISO/IEC DIS 17067:2025)
Ta slovenski standard je istoveten z: prEN ISO/IEC 17067
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/IEC DIS 17067
ISO/CASCO
Conformity assessment —
Secretariat: ISO
Fundamentals of and guidelines for
Voting begins on:
conformity assessment schemes
2025-08-01
ICS: 03.120.20
Voting terminates on:
2025-10-24
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
This document is circulated as received from the committee secretariat. IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This draft is submitted to a parallel vote in ISO and in IEC.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
© ISO/IEC 2025
ISO/IEC DIS 17067:2025(en)
DRAFT
ISO/IEC DIS 17067:2025(en)
International
Standard
ISO/IEC DIS 17067
ISO/CASCO
Conformity assessment —
Secretariat: ISO
Fundamentals of and guidelines for
Voting begins on:
conformity assessment schemes
ICS: 03.120.20
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
This document is circulated as received from the committee secretariat.
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This draft is submitted to a parallel vote in ISO and in IEC.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO/IEC 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
© ISO/IEC 2025
ISO/IEC DIS 17067:2025(en)
© ISO/IEC 2025 – All rights reserved
ii
ISO/IEC DIS 17067:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Conformity assessment schemes (programmes) and systems. 5
4.1 Schemes and systems .5
4.2 Objects of conformity assessment .7
4.3 Specified requirements .8
4.4 Methodology .8
5 Functional approach to conformity assessment . 9
5.1 General .9
5.2 Conformity assessment activities .9
5.3 Selection and determination .10
5.4 Review, decision and attestation.10
5.5 Surveillance .11
6 Content of a scheme .11
6.1 Functional approach implemented in the scheme .11
6.1.1 Sampling .11
6.1.2 Prior conformity assessment results .11
6.1.3 Outsourcing of the conformity assessment activities . .11
6.1.4 Surveillance . 12
6.2 Licensing and controlling the use of statement of conformity . 12
6.3 Reporting to the scheme owner . 13
6.4 Complaints and appeals. 13
6.5 Rules and procedures of a scheme . 13
7 Scheme owner responsibility .15
7.1 General . 15
7.2 Scheme owner .17
7.3 Ownership .17
7.4 Development .18
7.5 Management . . .18
7.6 Maintenance .18
7.7 Scheme integrity .19
8 Lifecycle of a scheme . .20
8.1 Identifying the need for conformity assessment schemes . 20
8.2 Development of schemes . . 20
8.3 Scheme documentation .21
8.4 Discontinuing a scheme .21
9 Categorization and types of schemes .21
Annex A (Informative) Conformity assessment schemes that include product, process or
service certification .23
Annex B (Informative) Conformity assessment schemes that include management system
certification .27
Annex C (Informative) Conformity assessment schemes that include certification of persons .29
Annex D (Informative) Conformity assessment programmes that include validation/verification .31
Annex E (Informative) Conformity assessment schemes that include inspection .33
Annex F (Informative) Conformity assessment schemes that include testing .34
© ISO/IEC 2025 – All rights reserved
iii
ISO/IEC DIS 17067:2025(en)
Annex G (Informative) Conformity assessment schemes that include accreditation .35
Annex H (Informative) Conformity assessment schemes that include peer assessment .37
Annex I (Informative) Conformity assessment schemes that include declaration .39
Annex J (Informative) Conformity assessment schemes that include multiple types of objects of
conformity assessment .40
Annex K (Informative) Typical characteristics of schemes .43
Bibliography .46
© ISO/IEC 2025 – All rights reserved
iv
ISO/IEC DIS 17067:2025(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.