EN ISO 15615:2013

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2013)

ISO 15615:2013 establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in ISO 14114. It does not cover the high-pressure piping, flexible hoses and the regulator.

Gasschweißgeräte - Acetylenflaschen-Batterieanlagen für Schweißen, Schneiden und verwandte Prozesse - Sicherheitsanforderungen für Hochdruckeinrichtungen (ISO 15615:2013)

Diese Internationale Norm legt allgemeine Festlegungen, Anforderungen und Prüfungen für hochdruckseitig liegende Ausrüstungsteile in Acetylenflaschen-Batterieanlagen nach ISO 14114 fest. Diese Norm behandelt nicht die Hochdruckleitungen, Schlauchleitungen und den Druckregler.
ANMERKUNG   Die Begriffe „anströmseitig“ und „abströmseitig“ beziehen sich auf die normale Gasdurchflussrichtung der Einrichtung.

Matériel de soudage aux gaz - Centrales de détente pour la distribution d'acétylène pour le soudage, le coupage et les techniques connexes - Exigences de sécurité pour les dispositifs haute pression (ISO 15615:2013)

L'ISO 15615:2013 établit les spécifications générales, les exigences et les essais pour les dispositifs utilisés sur le côté haute pression des centrales d'acétylène telles que définies dans l'ISO 14114. Elle ne traite pas des canalisations haute pression, des tuyaux souples et des détendeurs.

Oprema za plamensko varjenje - Baterije acetilenskih jeklenk za varjenje, rezanje in sorodne postopke - Varnostne zahteve za visokotlačne naprave (ISO 15615:2013)

Ta mednarodni standard podaja splošne specifikacije, zahteve in preskuse za naprave, ki se nahajajo na tisti strani baterij acetilenskih jeklenk, kjer je visok tlak, kot je definirano v standardu ISO 14114. Ta standard ne obravnava visokotlačnega ocevja, hidroizolacijskih cevi in regulatorja.

General Information

• Status: Withdrawn
• Publication Date: 16-Apr-2013
• Withdrawal Date: 15-Nov-2022
• ICS: 23.060.40 - Pressure regulators
• ICS: 25.160.30 - Welding equipment
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 7 - Equipment for gas welding, cutting and allied processes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Nov-2022
• Ref Project: SIST EN ISO 15615:2013 - Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2013)

Relations

• Replaces: EN ISO 15615:2002 - Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002)
• Effective Date: 24-Apr-2013
• Replaced By: EN ISO 15615:2022 - Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2022)
• Effective Date: 15-Jan-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15615:2013
01-julij-2013
1DGRPHãþD
SIST EN ISO 15615:2003
2SUHPD]DSODPHQVNRYDUMHQMH%DWHULMHDFHWLOHQVNLKMHNOHQN]DYDUMHQMHUH]DQMH
LQVRURGQHSRVWRSNH9DUQRVWQH]DKWHYH]DYLVRNRWODþQHQDSUDYH,62

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied
processes - Safety requirements in high-pressure devices (ISO 15615:2013)
Gasschweißgeräte - Acetylenflaschen-Batterieanlagen für Schweißen, Schneiden und
verwandte Prozesse - Sicherheitsanforderungen für Hochdruckeinrichtungen (ISO
15615:2013)
Matériel de soudage aux gaz - Centrales de détente pour la distribution d'acétylène pour
le soudage, le coupage et les techniques connexes - Exigences de sécurité pour les
dispositifs haute pression (ISO 15615:2013)
Ta slovenski standard je istoveten z: EN ISO 15615:2013
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 15615:2013 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15615:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 15615:2013


EUROPEAN STANDARD
EN ISO 15615

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2013
ICS 25.160.30 Supersedes EN ISO 15615:2002
English Version
Gas welding equipment - Acetylene manifold systems for
welding, cutting and allied processes - Safety requirements in
high-pressure devices (ISO 15615:2013)
Matériel de soudage aux gaz - Centrales de détente pour la Gasschweißgeräte - Acetylenflaschen-Batterieanlagen für
distribution d'acétylène pour le soudage, le coupage et les Schweißen, Schneiden und verwandte Prozesse -
techniques connexes - Exigences de sécurité pour les Sicherheitsanforderungen für Hochdruckeinrichtungen (ISO
dispositifs haute pression (ISO 15615:2013) 15615:2013)
This European Standard was approved by CEN on 9 February 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15615:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15615:2013
EN ISO 15615:2013 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 15615:2013
EN ISO 15615:2013 (E)
Foreword
This document (EN ISO 15615:2013) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2013, and conflicting national standards shall be withdrawn at
the latest by October 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15615:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden
...