FprEN 14351-2

Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

This European Standard identifies material independent performance characteristics that are applicable to internal pedestrian doorsets.
This document applies to:
- Manually internal pedestrian doorsets and screens with flush or panelled leaves, complete with:
     - related hardware,
     - integral fanlights, if any,
     - adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The products covered by this document are not assessed for structural applications.
This document does not apply to:
- Internal pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be relevant for these internal doors (see prEN 14351-3);
- industrial, commercial and garage doors and gates according to EN 13241-1 and prEN 13241-2;
- external pedestrian doorsets according to EN 14351-1;
- revolving internal pedestrian doorsets,
- door leaves placed on the market separately.

Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 2: Innentüren ohne Feuerschutz- und/oder Rauchdichtheitseigenschaften

Die vorliegende Europäische Norm benennt werkstoffunabhängige Leistungsmerkmale, die auf Innentüren zutreffen.
Das vorliegende Dokument gilt für:
- handbetätigte Innentüren und Vorsatztüren mit glatten oder getäfelten Flügeln;
- zugehörige Beschläge;
- eingebaute Oberlichter, falls vorhanden;
- anliegende Teile, die in einen einzelnen Rahmen zum Einbau in eine einzelne Öffnung eingebunden sind, wenn vorhanden;
Die von dieser Europäischen Norm berücksichtigten Produkte werden hinsichtlich ihrer Anwendung nicht als tragende Bauteile beurteilt.
Die vorliegende Europäische Norm gilt nicht für:
- Innentüren, die Bestimmungen zur Rauchdichtheit und zum Feuerwiderstand nach prEN 14351-3 unter-liegen, jedoch können einzelne der in Abschnitt 4 angegebenen Eigenschaften und Leistungsanforde-rungen für diese Innentüren maßgeblich sein (siehe prEN 14351-3);
- Industrie-, Handels- und Garagentüren und Tore nach EN 13241-1 und prEN 13241-2;
- Außentüren nach EN 14351-1;
- Innendrehtüren;
- im Handel einzeln erhältliche Türblätter.

Portes et fenêtres - Norme produit, caractéristiques de performances - Partie 2 : Blocs portes intérieurs pour piétons sans caractéristiques de résistance au feu et/ou dégagement de fumée

La présente Norme européenne détermine les caractéristiques de performance, indépendantes des
matériaux, qui sont applicables aux blocs portes intérieurs pour piétons.
Le présent document s'applique aux :
- blocs portes intérieurs manuels pour piétons et ensembles composés avec vantaux plans ou menuisés,
complétés :
- de la quincaillerie associée ;
- d'impostes, si elles existent ;
- de parties adjacentes qui sont intégrées dans un châssis individuel afin d'être installées dans une
seule ouverture, si elles existent.
Les produits couverts par le présent document ne sont pas destinés à des applications structurelles.
Le présent document ne s'applique pas aux :
- blocs portes intérieurs pour piétons soumis à des réglementations concernant le dégagement de fumée
et la résistance au feu qui relèvent du prEN 14351-3, mais des caractéristiques individuelles et des
exigences de performance données à l'Article 4 peuvent être adaptées à ces portes intérieures (voir
prEN 14351-3) ;
- portes industrielles, commerciales et de garages qui relèvent de l'EN 13241-1 et du prEN 13241-2 ;
- blocs portes extérieurs pour piétons qui relèvent de l'EN 14351-1 ;
- blocs portes intérieurs à tambour pour piétons ;
- vantaux de portes commercialisés séparément.

Okna in vrata - Standard za proizvod, zahtevane lastnosti - 2. del: Notranja vrata brez določenih lastnosti požarne odpornosti in dimnotesnosti, vendar z vključeno odpornostjo strešnih oken proti požaru z zunanje strani

General Information

• Status: Not Published
• Publication Date: 10-Apr-2011
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 1/2 - Windows and doors
• Current Stage: 4598 - Decision to abandon - Finalization for Vote
• Start Date: 09-Sep-2011
• Completion Date: 09-Sep-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Ref Project: oSIST prEN 14351-2:2009 - Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2009
2NQDLQYUDWD6WDQGDUG]DSURL]YRG]DKWHYDQHODVWQRVWLGHO1RWUDQMDYUDWD
EUH]GRORþHQLKODVWQRVWLSRåDUQHRGSRUQRVWLLQGLPQRWHVQRVWLYHQGDU]YNOMXþHQR
RGSRUQRVWMRVWUHãQLKRNHQSURWLSRåDUX]]XQDQMHVWUDQL
Windows and doors - Product standard, performance characteristics - Part 2: Internal
pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 2: Innentüren ohne
Feuerschutz- und/oder Rauchdichtheiteigenschaften
Portes et fenêtres - Norme produit, caractéristiques de performances - Partie 2 : Blocs
portes intérieurs pour piétons sans caractéristiques de résistance au feu et/ou
dégagement de fumée
Ta slovenski standard je istoveten z: prEN 14351-2
ICS:
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
prEN 14351-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2009
ICS
English Version
Windows and doors - Product standard, performance
characteristics - Part 2: Internal pedestrian doorsets without
resistance to fire and/or smoke leakage characteristics
Portes et fenêtres - Norme produit, caractéristiques de Fenster und Türen - Produktnorm, Leistungseigenschaften
performances - Partie 2 : Blocs portes intérieurs pour - Teil 2: Innentüren ohne Feuerschutz- und/oder
piétons sans caractéristiques de résistance au feu et/ou Rauchdichtheiteigenschaften
dégagement de fumée
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14351-2:2009: E
worldwide for CEN national Members.

prEN 14351-2:2009 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
2.1 Classification standards .5
2.2 Test and calculation standards .6
2.3 Other standards .7
3 Terms and definitions .7
4 Performance characteristics and special requirements .8
4.1 General .8
4.2 Dangerous substances .8
4.3 Impact resistance.8
4.4 Height and width of doorsets .9
4.5 Ability to release .9
4.6 Acoustic performance .9
4.7 Thermal transmittance .9
4.8 Air permeability . 10
4.9 Durability . 10
4.10 Operating forces . 10
4.11 Mechanical strength . 10
4.12 Ventilation . 10
4.13 Bullet resistance . 11
4.14 Explosion resistance . 11
4.15 Resistance to repeated opening and closing . 11
4.16 Behaviour between two different climates . 11
4.17 Burglar resistance . 11
4.18 Special requirements . 12
5 Classification and designation . 12
5 Handling, installation, maintenance and care . 14
6 Evaluation of conformity . 15
6.1 General . 15
6.2 Initial Type Testing (ITT) . 15
6.3 Factory production control (FPC) . 18
6.4 Initial inspection of factory and FPC . 20
6.5 Testing of samples taken at the factory in accordance with a prescribed plan . 21
7 Labelling and packaging . 21
Annex A (informative) Interdependence between characteristics and component . 22
A.1 General . 22
Annex B (normative) Determination of characteristics . 24
B.1 Characteristics of internal pedestrian doorsets . 24
B.2 Sound insulation of pedestrian doorsets . 26
B.3 Thermal transmittance for pedestrian doorsets U in accordance to constructive details . 27
D
Annex C (informative) Example of performance and requirement profile of an internal doorsets . 30
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU
Construction Products Directive . 31
ZA.1 Scope and relevant characteristics . 31
ZA.2 Procedure(s) for the attestation of conformity of products . 33
prEN 14351-2:2009 (E)
ZA.3 CE marking and labelling. 38
Bibliography . 41

prEN 14351-2:2009 (E)
Foreword
This document (prEN 14351-2:2009) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This European Standard is one of a series of standards for windows and pedestrian doorsets (see Figure 1).

EN 14351-1, Windows and prEN 14351-3, Windows
prEN 14351-2, Windows
doors - Product standard, and doors — Product and doors — Product

performance characteristics standard, performance
standard, performance
- Part 1: Windows and characteristics — Part 3: characteristics — Part 2:

external pedestrian doorsets Windows and pedestrian
Internal pedestrian doorsets
without resistance to fire doorsets with resistance to without resistance to fire

and/or smoke leakage fire and/or smoke leakage
and/or smoke leakage
characteristics  characteristics characteristics

(Harmonized standard)
(Harmonized standard) (Harmonized standard)

EN 14600, Doorsets and
openable windows with fire
resisting and/or smoke
control characteristics -
Requirements and
Supporting standards, prepared by CEN/TC 33 or
classification
others TCs, identified in Clause 2 of the supported

standards
Figure 1 — Relationship between various standards

prEN 14351-2:2009 (E)
1 Scope
This European Standard identifies material independent performance characteristics that are applicable to
internal pedestrian doorsets.
This document applies to:
 Manually internal pedestrian doorsets and screens with flush or panelled leaves, complete with:
 related hardware,
 integral fanlights, if any,
 adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The products covered by this document are not assessed for structural applications.
This document does not apply to:
 Internal pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to
prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be
relevant for these internal doors (see prEN 14351-3);
 industrial, commercial and garage doors and gates according to EN 13241-1 and prEN 13241-2;
 external pedestrian doorsets according to EN 14351-1;
 revolving internal pedestrian doorsets,
 door leaves placed on the market separately.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
2.1 Classification standards
EN 1192, Doors — Classification of strength requirements
EN 1522, Windows, doors, shutters and blinds — Bullet resistance — Requirements and classification
prEN 1627, Pedestrian doorsets, windows, curtain walling, grilles and shutters — Burglar resistance —
Requirements and classification
EN 12207:1999, Windows and doors — Air permeability — Classification
EN 12217, Doors – Operating forces — Requirements and classification
EN 12219, Doors — Climatic influences — Requirements and classification
EN 12400, Windows and pedestrian doors — Mechanical durability — Requirements and classification
EN 13049, Windows — Soft and heavy body impact —Test method, safety requirements and classification
prEN 14351-2:2009 (E)
EN 13123-1, Windows, doors and shutters — Explosion resistance — Requirements and classification —
Part 1: Shock tube
EN 13123-2, Windows, doors and shutters — Explosion resistance — Test method — Part 2: Range test
2.2 Test and calculation standards
EN 179, Building hardware — Emergency exit devices operated by a lever handle or push pad —
Requirements and test method.
EN 947, Hinged or pivoted doors — Determination of the resistance to vertical load
EN 948, Hinged or pivoted doors — Determination of the resistance to static torsion
EN 949, Windows and curtain walling
...