EN 13647:2002

Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics

This European Standard specifies methods of measuring the geometrical characteristics of wood and parquet flooring and wood panelling and cladding elements.
This European Standard does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed.

Holzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer Eigenschaften

Diese Europäische Norm legt Messfahren für die Bestimmung der Maße, Winkel und Verformungen von Holzfußböden sowie von Elementen für Wand  und Deckenbekleidungen aus Holz fest.
Die Probenahme wird in dieser Norm nicht festgelegt, sie ist den Produktnormen oder Prüfverfahren zu entnehmen.
Diese Norm gilt nicht für eingebaute Elemente.

Planchers et parquets en bois et lambris et bardages en bois - Détermination des caractéristiques géométriques

La présente norme définit des méthodes de mesure des caractéristiques géométriques des éléments de planchers, de parquets, de lambris et de bardages en bois.
La présente norme ne définit pas l'échantillonnage que l'on doit trouver dans les normes de produit ou les méthodes d'essais et elle ne s'applique pas aux éléments installés.

Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics

General Information

• Status: Withdrawn
• Publication Date: 17-Dec-2002
• Withdrawal Date: 17-May-2011
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 3 - Specific user requirements
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-May-2011
• Completion Date: 18-May-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13647:2003 - Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics

Relations

• Replaced By: EN 13647:2011 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
• Effective Date: 21-May-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristicsHolzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer EigenschaftenPlanchers et parquets en bois et lambris et bardages en bois - Détermination des caractéristiques géométriquesWood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 13647:2002SIST EN 13647:2003en01-oktober-2003SIST EN 13647:2003SLOVENSKI
STANDARD



SIST EN 13647:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13647December 2002ICS 79.080English versionWood and parquet flooring and wood panelling and cladding -Determination of geometrical characteristicsPlanchers et parquets en bois et lambris et bardages enbois - Mesure des charactéristiques géométriquesHolzfußböden und Wand- und Deckenbekleildungen ausHolz - Bestimmung geometrischer EigenschaftenThis European Standard was approved by CEN on 4 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13647:2002 ESIST EN 13647:2003



EN 13647:2002 (E)2ContentspageForeword.4Introduction.51Scope.62Normative references.63Terms and definitions.64Principles.64.1General.64.2Dimensions.64.3Angles.64.4Warp.64.4.1Cup.64.4.2Bow.74.4.3Spring.84.5Lipping.95Equipment.95.1General.
...