EN 13647:2011

Wood flooring and wood panelling and cladding - Determination of geometrical characteristics

This European Standard specifies methods of measuring the geometrical characteristics of wood flooring and wood panelling and cladding elements.
This European Standard does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed.

Holzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer Eigenschaften

Diese Europäische Norm legt Messverfahren für die Bestimmung der geometrischen Eigenschaften von Holzfußböden sowie von Elementen für Wand- und Deckenbekleidungen aus Holz fest.
Die Probenahme wird in dieser Europäischen Norm nicht festgelegt, sie ist den Produktnormen oder Prüfverfahren zu entnehmen. Diese Norm gilt nicht für eingebaute Elemente.

Planchers en bois et lambris et bardages en bois - Détermination des caractéristiques géométriques

Le présent document définit des méthodes de mesure des caractéristiques géométriques des éléments de planchers, de lambris et de bardages en bois.
Le présent document ne définit pas l'échantillonnage que l'on doit trouver dans les normes de produit ou les méthodes d'essais et elle ne s'applique pas aux éléments installés.

Lesene talne obloge in lesen opaž ter lesne obloge zidu - Ugotavljanje geometrijskih lastnosti

Ta evropski standard določa metode merjenja geometrijskih lastnosti lesenih talnih oblog in elementov lesnih oblog zidu ter lesenega opaža. Ta dokument ne določa vzorčenja, ki ga je najti v proizvodnih standardih, ali testnih metod in se ne uporablja za vgrajene elemente.

General Information

• Status: Withdrawn
• Publication Date: 17-May-2011
• Withdrawal Date: 13-Apr-2021
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 33 - Specific user requirements - Timber in flooring
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 14-Apr-2021
• Ref Project: SIST EN 13647:2011 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics

Relations

• Replaces: EN 13647:2002 - Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics
• Effective Date: 21-May-2011
• Replaced By: EN 13647:2021 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lesene talne obloge in lesen opaž ter lesne obloge zidu - Ugotavljanje geometrijskih lastnostiHolzfussböden und Wand-und Deckenbekleidungen aus Holz - Bestimmung geometrischer EigenschaftenPlanchers en bois et lambris et bardages en bois - Mesure des caractéristiques géométriquesWood flooring and wood panelling and cladding - Determination of geometrical characteristics97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 13647:2011SIST EN 13647:2011en,fr,de01-oktober-2011SIST EN 13647:2011SLOVENSKI
STANDARDSIST EN 13647:20031DGRPHãþD



SIST EN 13647:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13647
May 2011 ICS 79.080 Supersedes EN 13647:2002English Version
Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
Planchers en bois et lambris et bardages en bois - Détermination des caractéristiques géométriques
Holzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer Eigenschaften This European Standard was approved by CEN on 14 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13647:2011: ESIST EN 13647:2011



EN 13647:2011 (E) 2 Contents Page Foreword .4 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Principles .5 4.1 General .5 4.2 Dimensions .5 4.3 Angles .5 4.4 Warp .5 4.4.1 Cup .5 4.4.2 Bow .7 4.4.3 Spring .8 4.5 Lipping .9 5 Equipment .
...