SIST EN 13647:2003
(Main)Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics
This European Standard specifies methods of measuring the geometrical characteristics of wood and parquet flooring and wood panelling and cladding elements.
This European Standard does not specify sampling, which is intended to be found in the product standards or test methods and it does not apply to elements which are installed.
Holzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer Eigenschaften
Diese Europäische Norm legt Messfahren für die Bestimmung der Maße, Winkel und Verformungen von Holzfußböden sowie von Elementen für Wand und Deckenbekleidungen aus Holz fest.
Die Probenahme wird in dieser Norm nicht festgelegt, sie ist den Produktnormen oder Prüfverfahren zu entnehmen.
Diese Norm gilt nicht für eingebaute Elemente.
Planchers et parquets en bois et lambris et bardages en bois - Détermination des caractéristiques géométriques
La présente norme définit des méthodes de mesure des caractéristiques géométriques des éléments de planchers, de parquets, de lambris et de bardages en bois.
La présente norme ne définit pas l'échantillonnage que l'on doit trouver dans les normes de produit ou les méthodes d'essais et elle ne s'applique pas aux éléments installés.
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristicsHolzfußböden und Wand- und Deckenbekleidungen aus Holz - Bestimmung geometrischer EigenschaftenPlanchers et parquets en bois et lambris et bardages en bois - Détermination des caractéristiques géométriquesWood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 13647:2002SIST EN 13647:2003en01-oktober-2003SIST EN 13647:2003SLOVENSKI
STANDARD
SIST EN 13647:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13647December 2002ICS 79.080English versionWood and parquet flooring and wood panelling and cladding -Determination of geometrical characteristicsPlanchers et parquets en bois et lambris et bardages enbois - Mesure des charactéristiques géométriquesHolzfußböden und Wand- und Deckenbekleildungen ausHolz - Bestimmung geometrischer EigenschaftenThis European Standard was approved by CEN on 4 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13647:2002 ESIST EN 13647:2003
EN 13647:2002 (E)2ContentspageForeword.4Introduction.51Scope.62Normative references.63Terms and definitions.64Principles.64.1General.64.2Dimensions.64.3Angles.64.4Warp.64.4.1Cup.64.4.2Bow.74.4.3Spring.84.5Lipping.95Equipment.95.1General.95.2Equipment to measure the dimensions.105.2.1Vernier calliper.105.2.2Micrometer.105.2.3Ruler.105.3Equipment to measure angle values.105.3.1General.105.3.2Equipment for square cut elements.105.3.3Equipment for mitre cut elements.105.4Equipment to measure warp.105.4.1Equipment to measure cup.105.4.2Calibration of the gauge.115.4.3Equipment to measure bow and spring.115.4.4Equipment to measure lipping.115.4.5Conditioning equipment, if relevant.116Procedure.116.1Dimensions and shape.116.2Conditioning.116.3Measurement and recording.116.4Dimensions.126.4.1Length and width of the element.126.4.2Thickness of the element.126.5Additional dimensions, if relevant.126.5.1Overall dimensions.126.5.2Depth of the groove.126.5.3Width of the tongues.136.5.4Undercut.136.5.5Thickness of the tongue.136.5.6Width of the groove.146.5.7Thickness of the upper lip.146.5.8Thickness above the groove.146.6Angles.14SIST EN 13647:2003
EN 13647:2002 (E)36.6.1Squareness.146.6.2Mitre cuts.146.7Warp.156.7.1Cup.156.7.2Bow.156.7.3Spring.156.7.4Lipping.167Expression of results.167.1Dimensions.167.1.1Length and width of the element.167.1.2Thickness of the element.167.2Additional dimensions, if relevant.167.2.1Overall dimensions.167.2.2Depth of the grooves.167.2.3Width of the tongue.167.2.4Undercut.167.2.5Thickness of the tongue.167.2.6Width of the groove.167.2.7Thickness of the upper lip.177.2.8Thickness above the groove.177.3Angle measurement.177.3.1Squareness.177.3.2Mitre cuts.177.4Warp.177.4.1Cup.177.4.2Bow.177.4.3Spring.177.4.4Lipping.178Test report.18Annex A (informative)
Apparatus for square cut elements.19Annex B (normative)
Test rig to measure cup.20SIST EN 13647:2003
EN 13647:2002 (E)4ForewordThis document (EN 13647:2002) has been prepared by Technical Committee CEN /TC 175, "Round and sawntimber" the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest byJune 2003.In this European Standard the annex A is informative and annex B is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13647:2003
EN 13647:2002 (E)5IntroductionThis document is one of a series of standards specifying requirements and test methods for wood and parquetflooring.The measurements should be carried out as specified in this standard or with any other equipment or principlesgiving at least the same accuracy.SIST EN 13647:2003
EN 13647:2002 (E)61 ScopeThis European Standard specifies methods of measuring the geometrical characteristics of wood and parquetflooring and wood panelling and cladding elements.This European Standard does not specify sampling, which is intended to be found in the product standards or testmethods and it does not apply to elements which are installed.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated refer
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.