iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 726-7:1999

(Main)

Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module

Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module

This part of EN 726 specifies :  - the minimum security requirements for a Security Module (SM) ;  - the general card related functions embedded in the SM - terminal protocols including minimum data exchange ; The data elements and cryptographic processing described in annex A for the case where the SM is an ICC should be supported if the SM is not an ICC or the configuration of the system, e.g. where the SM handles more than one terminal/user card.

Identifikationskartensysteme - Chipkarten und Endgeräte für Telekommunikationszwecke - Teil 7: Sicherheitsmodul

Dieser Teil von EN 726 legt fest :  -die Mindest-Sicherheitsanforderungen für ein Sicherheitsmodul (SM) ; - die allgemeinen kartenbezogenen Funktionen, die in das SM integriert sind - Endgeräteprotokolle einschließlich einem minimalen Datenaustausch ; die in Anhang A beschriebenen Datenelemente und die kryptographische Verarbeitung, für den Fall, daß das SM eine ICC ist, sollten unterstützt werden, wenn das SM keine ICC oder keine Systemkonfiguration ist, z. B. wenn das SM mehr als ein Endgerät bzw. mehr als eine Nutzerkarte betrifft.

Systèmes de cartes d'identification - Cartes à circuit intégré et terminaux pour les télécommunications - Partie 7: Module de sécurité

Cette partie de l'EN 726 spécifie :  - les besoins minimum en sécurité pour un Module de Sécurité (SM);  - les fonctions générales relatives à la carte incluses dans les protocoles SM - terminal y compris l'échange minimum de données; il convient que les éléments de données et procédés cryptographiques décrits en annexeA dans le cas où le SM est une ICC, soient supportés si le SM n'est pas une ICC ni la configuration du système, par exemple lorsque le SM traite plus d'une carte terminal/utilisateur.

Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module

General Information

Status
Published
Publication Date
19-Jan-1999
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
CEN/TC 224 - Machine-readable cards, related device interfaces and operations
Drafting Committee
CEN/TC 224/WG 9 - Telecommunication applications
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Sep-2023
Completion Date
02-Sep-2023
Ref Project
SIST EN 726-7:2004 - Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module

Buy Standard

EN 726-7:2004EN 726-7:2004
PreviousNext
Standard
EN 726-7:2004
English language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 726-7:2004
01-maj-2004
Identification card systems - Telecommunications integrated circuit(s) cards and
terminals - Part 7: Security module
Identification card systems - Telecommunications integrated circuit(s) cards and
terminals - Part 7: Security module
Identifikationskartensysteme - Chipkarten und Endgeräte für Telekommunikationszwecke
- Teil 7: Sicherheitsmodul
Systemes de cartes d'identification - Cartes a circuit intégré et terminaux pour les
télécommunications - Partie 7: Module de sécurité
Ta slovenski standard je istoveten z: EN 726-7:1999
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN 726-7:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 726-7:2004

---------------------- Page: 2 ----------------------

SIST EN 726-7:2004

---------------------- Page: 3 ----------------------

SIST EN 726-7:2004

---------------------- Page: 4 ----------------------

SIST EN 726-7:2004

---------------------- Page: 5 ----------------------

SIST EN 726-7:2004

---------------------- Page: 6 ----------------------

SIST EN 726-7:2004

---------------------- Page: 7 ----------------------

SIST EN 726-7:2004

---------------------- Page: 8 ----------------------

SIST EN 726-7:2004

---------------------- Page: 9 ----------------------

SIST EN 726-7:2004

---------------------- Page: 10 ----------------------

SIST EN 726-7:2004

---------------------- Page: 11 ----------------------

SIST EN 726-7:2004

---------------------- Page: 12 ----------------------

SIST EN 726-7:2004

---------------------- Page: 13 ----------------------

SIST EN 726-7:2004

---------------------- Page: 14 ----------------------

SIST EN 726-7:2004

---------------------- Page: 15 ----------------------

SIST EN 726-7:2004

---------------------- Page: 16 ----------------------

SIST EN 726-7:2004

---------------------- Page: 17 ----------------------

SIST EN 726-7:2004

---------------------- Page: 18 ----------------------

SIST EN 726-7:2004

---------------------- Page: 19 ----------------------

SIST EN 726-7:2004

---------------------- Page: 20 ----------------------

SIST EN 726-7:2004

---------------------- Page: 21 ----------------------

SIST EN 726-7:2004

---------------------- Page: 22 ----------------------

SIST EN 726-7:2004

---------------------- Page: 23 ----------------------

SIST EN 726-7:2004

---------------------- Page: 24 ----------------------

SIST EN 726-7:2004

---------------------- Page: 25 ----------------------

SIST EN 726-7:2004

---------------------- Page: 26 ----------------------

SIST EN 726-7:2004

---------------------- Page: 27 ----------------------

SIST EN 726-7:2004

---------------------- Page: 28 ----------------------

SIST EN 726-7:2004

---------------------- Page: 29 ----------------------

SIST EN 726-7:2004

---------------------- Page: 30 ----------------------

SIST EN 726-7:2004

---------------------- Page: 31 ----------------------

SIST EN 726-7:2004

---------------------- Page: 32 ----------------------

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 17982:2023(Main)
European Digital Identity Wallets standards Gap Analysis
SIST-TP CEN/TR 17982:2024

This document identifies relevant existing standards and standards work in progress around European Digital Identity Wallets. It also identifies missing work items and overlaps in standards and is supposed to work as a roadmap for future standardization projects in the area.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/IEC 2382-37:2023(Main)
Information technology - Vocabulary - Part 37: Biometrics (ISO/IEC 2382-37:2022)
SIST EN ISO/IEC 2382-37:2024

This document establishes a systematic description of the concepts in the field of biometrics pertaining to recognition of human beings. This document also reconciles variant terms in use in pre-existing International Standards on biometrics against the preferred terms, thereby clarifying the use of terms in this field.
This document does not cover concepts (represented by terms) from information technology, pattern recognition, biology, mathematics, etc. Biometrics uses such fields of knowledge as a basis.
In principle, mode-specific terms are outside of scope of this document.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17661:2021(Main)
Personal identification – European enrolment guide for biometric ID documents (EEG)
SIST-TS CEN/TS 17661:2022

This document consolidates information relating to successful and high quality biometric enrolment processes of facial and fingerprint systems, while indicating risk factors and providing appropriate mitigations. This information supports decisions regarding procurement, design, deployment and operation of these biometric systems.
This document provides guidance on:
—   capturing of facial images to be used as reference images in identity and secure documents;
—   capturing of fingerprint images to be used as reference images in identity and secure documents;
—   data quality maintenance for biometric reference data;
—   data authenticity maintenance for biometric reference data.
The document addresses the following aspects which are specific for biometric reference data capturing:
—   biometric data quality and interoperability ensurance;
—   data authenticity ensurance;
—   morphing and other presentation attack detection as well as other unauthorized changes;
—   accessibility and usability;
—   privacy and data protection;
—   optimal enrolment design.
The following aspects are out of scope:
—   IT security;
—   data capturing for verification purposes, e.g. in ABC gates;
—   capturing biometric data for enrolment in other systems different from data enrolment for integration in secure MRTD, like entry/exit systems.
This document consolidates the role of the enrolment process in a biometric system and differentiates the enrolment from the authentication, while mentioning key factors of the enrolment process that are feature independent.
Interests of the existing stakeholders are broken down and provide an insight on different views of the enrolment. In addition, organisational enrolment approaches are covered.
This document is not concerned with IT requirements or the capturing of biometric data for inspection, identification or verification purposes without the required step of creating an identity document using the captured data.

  • Technical specification
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17631:2021(Main)
Personal identification - Biometric group access control
SIST-TS CEN/TS 17631:2021

This document provides guidance on providing access:
— to areas with physical access control, e.g. entertainment facilities, train stations, shops, libraries, banks, or border control,
— for small groups of persons, e.g. families with small children or seniors, or other accompanied persons in need of support,
— by means of biometric authentication technologies, e.g. facial, fingerprint, or vein recognition,
— in the European regulatory context.
The document addresses the following aspects, which are specific for biometric and group access:
— accessibility and usability,
— user guidance including group guidance and interaction control,
— privacy including data set content,
— presentation attack detection,
— applicable biometric technologies,
— storage of reference data,
— biometric process integration,
— specific needs considering biometrics for groups,
— biometric performance and error rates, and
— group internal linkage.
The following aspects which reflect on generic access control issues are out of scope:
— IT security,
— application specific physical security,
— policy definition,
— processes not related to biometric authentication, and
— specific performance requirements of identification (1:N) and verification (1:1) applications.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17489-1:2020(Main)
Personal identification - Secure and interoperable European Breeder Documents - Part 1: Framework overview
SIST-TS CEN/TS 17489-1:2020

This document provides an overview of a framework on breeder documents. It introduces the document structure of CEN/TS 17489 (all parts) that specifies how citizens retain the control of breeder document data and how they can use them to support identity proofing and verification. Moreover, the framework provides methodologies to assess and increase the level of trust in breeder documents.
This framework specifies methods for:
-   defining physical and logical/digital representations of a secure breeder document (hardware based, paper-based, server-based),
-   securing breeder document processes,
-   linking the document to its legitimate holder.
The following types of breeder documents are in the scope of the framework:
-   birth certificates,
-   marriage and partnership certificates,
-   death certificates.
The following breeder documents management processes including first-time application, later-in-life registration of an identity, and content update (e.g. name-changing) are in the scope of this framework:
-   registration,
-   issuance,
-   renewal,
-   inspection/verification,
-   revocation.
The specification of policies is out of scope.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1332-3:2020(Main)
Identification card systems - User Interface - Part 3: Key pads
SIST EN 1332-3:2020

This document covers the ergonomic layout and usability of keypads. The keypad consists of numeric, command and function keys and alphanumeric characters. On the basis that keypad layout impacts performance (keying speed, and errors), this document aims to:
-   enhance usability,
-   ensure ease of use through consistency,
-   increase customer confidence,
-   reduce customer error,
-   improve operating time,
-   ensure ergonomic data entry.
This document specifies the arrangement, the number and location of numeric, function and command keys, including placement of alphabetic characters on numeric keys. Design requirements and recommendations are also provided.
This document applies to all identification card systems with a numeric keypad for use by the public for stationary or non-stationary devices. This document also covers keypads on touch sensitive devices.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17261:2018(Main)
Biometric authentication for critical infrastructure access control - Requirements and Evaluation
SIST-TS CEN/TS 17261:2019

This document addresses biometric recognition systems that are used as part of an automated access control system to provide a second and independent authentication factor of the individual using the AACS to access secured areas of critical infrastructure.
This document:
-   specifies requirements for biometric recognition systems to be used as part of an AACS for critical infrastructure,
-   describes a methodology for the evaluation of biometric authentication for AACSs against the specified requirements.
The requirements and test methods address biometric authentication for AACS that: (i) operate in an internal environment constituting part of a larger site, access to which is restricted and controlled by a separate access control system; and (ii) use biometrics as a second authentication factor to a token or proximity card.
This document does not consider access by the general public, e.g. passengers in an airport, or visitors to a hospital.
Products that meet the requirements of this document will comprise (i) a biometric sensor(s) external to the secured area, which reads the biometric characteristics of the user at the point of access; and (ii) a biometric server system performing biometric enrolment, signal processing, storage of biometric references and biometric comparison within a secured area.
This document does not address AACS or AACS portals (turnstiles) but is only concerned with the biometric components which integrate with the AACS. Other standards address requirements and testing of the non-biometric parts of the AACS.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-5:2018(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 5: Trusted eService
SIST EN 419212-5:2018

This part of this series contains Identification, Authentication and Digital Signature (IAS) services in addition to the QSCD mechanisms already described in Part 1 to enable interoperability and usage for IAS services on a national or European level.
It also specifies additional mechanisms like key decipherment, Client Server authentication, identity management and privacy related services.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-4:2018(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 4: Privacy specific Protocols
SIST EN 419212-4:2018

This part specifies mechanisms for SEs to be used as privacy-enabled devices in the context of IAS, and fulfil the requirements of Article 5 of the so-called eIDAS Regulation about data processing and protection.
It covers:
- Age verification
- Document validation
- Restricted identification
- eServices with trusted third party based on ERA protocol

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-2:2017(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services
SIST EN 419212-2:2018

This part specifies mechanisms for SEs to be used as qualified signature creation devices covering:
•   Signature creation and mobile signature creation
•   User verification
•   Password based authentication
The specified mechanisms are suitable for other purposes like services in the context of EU Regulation 910/2014 of the European Parliament and the Council of 23 July 2014 on electronic identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC.
The particular case of seal is also covered by the specification. The differences between seal and signature are exposed in Annex B. Annex B also explains how the mechanisms for SEs as qualified signature creation devices can be used for SEs as qualified seal creation devices.
Mobile signature is an alternative to the classical signature case which is performed by a secure element. Mobile signature is encouraged by the large widespread of mobile devices and the qualification authorized by the eIDAS Regulation. The particular case of remote signature (or server signing) is covered by this specification in Annex C.
In the rest of this document, except Annex B, there will be no particular notion of a seal since it technically compares to the signature.

  • Standard
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day