EN ISO 7380:2004

Hexagon socket button head screws (ISO 7380:2004)

ISO 7380:2004 specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A.

Flachkopfschrauben mit Innensechskant (ISO 7380:2004)

Diese Internationale Norm legt die Eigenschaften von metrischen Flachkopfschrauben mit Innensechskant mit
Gewinden von M3 bis einschließlich M16 in Produktklasse A und mit Festigkeitsklasse 12.9 fest.
ANMERKUNG   Es wird besonders auf die Fußnote in Tabelle 2 und auf Tabelle 3 bezüglich der Einschränkung der Mindestbruchkraft hingewiesen.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so sollten diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2 und ISO 4759-1.

Vis à tête cylindrique bombée plate à six pans creux (ISO 7380:2004)

L'ISO 7380:2004 spécifie les caractéristiques des vis à tête cylindrique bombée à six pans creux, de filetage M3 à M16 inclus et de grade A.

Navojni zatiči s ploščato glavo z notranjim šestkotnikom (ISO 7380:2004)

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2004
• Withdrawal Date: 31-Jul-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Aug-2011
• Completion Date: 01-Aug-2011
• Ref Project: SIST EN ISO 7380:2004 - Hexagon socket button head screws (ISO 7380:2004)

Relations

• Replaces: EN ISO 7380:1997 - Hexagon socket button head screws (ISO 7380:1997)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 7380-1:2011 - Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2004
1DGRPHãþD
SIST EN ISO 7380:2001
1DYRMQL]DWLþLVSORãþDWRJODYR]QRWUDQMLPãHVWNRWQLNRP,62
Hexagon socket button head screws (ISO 7380:2004)
Flachkopfschrauben mit Innensechskant (ISO 7380:2004)
Vis a tete cylindrique bombée plate a six pans creux (ISO 7380:2004)
Ta slovenski standard je istoveten z: EN ISO 7380:2004
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7380
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2004
ICS 21.060.10 Supersedes EN ISO 7380:1997
English version
Hexagon socket button head screws (ISO 7380:2004)
Vis à tête cylindrique bombée plate à six pans creux (ISO Flachkopfschrauben mit Innensechskant (ISO 7380:2004)
7380:2004)
This European Standard was approved by CEN on 10 December 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7380:2004: E
worldwide for CEN national Members.

CORRECTED  2004-03-03
Foreword
This document (EN ISO 7380:2004) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-
threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2004, and conflicting national standards
shall be withdrawn at the latest by July 2004.
This document supersedes EN ISO 7380:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 7380:2004 has been approved by CEN as EN ISO 7380:2004 without any
modifications.
INTERNATIONAL ISO
STANDARD 7380
Third edition
2004-01-15
Hexagon socket button head screws
Vis à tête cylindrique bombée plate à six pans creux

Reference number
ISO 7380:2004(E)
©
ISO 2004
ISO 7380:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved

ISO 7380:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7380 was prepared by Technical Committee ISO/TC 2, Fasteners.
This third edition cancels and rep
...