EN ISO 7438:2005

Metallic materials - Bend test (ISO 7438:2005)

ISO 7438:2005 specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending.
ISO 7438:2005 applies to test pieces taken from metallic products as specified in the relevant product standard. It is not applicable to certain materials or products, for example tubes in full section or welded joints, for which other standards exist.

Metallische Werkstoffe - Biegeversuch (ISO 7438:2005)

In dieser Internationalen Norm ist ein Verfahren zur Bestimmung der plastischen Verformbarkeit metallischer Werkstoffe im Biegeversuch festgelegt.
Diese Internationale Norm wird angewendet für Proben, die von metallischen Erzeugnissen nach entsprechenden Werkstoffnormen entnommen werden. Sie ist nicht anwendbar auf spezielle Werkstoffe und/oder Erzeugnisse, z. B. Rohrabschnitte, Schweißverbindungen, für die es andere Normen gibt.

Matériaux métalliques - Essai de pliage (ISO 7438:2005)

L'ISO 7438:2005 spécifie une méthode de détermination de l'aptitude à la déformation plastique par pliage des matériaux métalliques.
L'ISO 7438:2005 est applicable aux éprouvettes prélevées dans des produits métalliques tels que spécifiés dans la norme de produit pertinente. Elle n'est pas applicable à certains matériaux ou produits, par exemple tubes en section complète ou assemblages soudés pour lesquels d'autres normes existent.

Kovinski materiali – Upogibni preskus (ISO 7438:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2005
• Withdrawal Date: 26-Jan-2016
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Jan-2016
• Ref Project: SIST EN ISO 7438:2005 - Metallic materials - Bend test (ISO 7438:2005)

Relations

• Replaces: EN ISO 7438:2000 - Metallic materials - Bend test (ISO 7438:1985)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 7438:2016 - Metallic materials - Bend test (ISO 7438:2016)
• Effective Date: 03-Feb-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7438:2005
01-november-2005
1DGRPHãþD
SIST EN ISO 7438:2000
Kovinski materiali – Upogibni preskus (ISO 7438:2005)
Metallic materials - Bend test (ISO 7438:2005)
Metallische Werkstoffe - Biegeversuch (ISO 7438:2005)
Matériaux métalliques - Essai de pliage (ISO 7438:2005)
Ta slovenski standard je istoveten z: EN ISO 7438:2005
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 7438:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7438:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 7438:2005



EUROPEAN STANDARD
EN ISO 7438

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2005
ICS 77.040.10 Supersedes EN ISO 7438:2000
English version
Metallic materials - Bend test (ISO 7438:2005)
Matériaux métalliques - Essai de pliage (ISO 7438:2005) Metallische Werkstoffe - Biegeversuch (ISO 7438:2005)
This European Standard was approved by CEN on 13 June 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7438:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7438:2005

EN ISO 7438:2005 (E)





Foreword


This document (EN ISO 7438:2005) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC 1 "Steel -
Mechanical testing", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2005, and conflicting national
standards shall be withdrawn at the latest by December 2005.

This document supersedes EN ISO 7438:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 7438:2005 has been approved by CEN as EN ISO 7438:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7438:2005

INTERNATIONAL ISO
STANDARD 7438
Second edition
2005-06-15


Metallic materials — Bend test
Matériaux métalliques — Essai de pliage





Reference number
ISO 7438:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 7438:2005
ISO 7438:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise spe
...