EN 4505:2013
(Main)Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
This standard specifies the procedure for the determination of dimensional stability of narrow fabrics.
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Textilien - Prüfverfahren - Bestimmung der Maßänderung
Série aérospatiale - Matériaux non-métalliques - Textiles - Méthode d'essai - Détermination de la stabilité
Aeronavtika - Nekovinski materiali - Tekstilije - Preskusne metode - Določanje dimenzijske stabilnosti
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Textilien - Prüfverfahren - Bestimmung der MaßänderungSérie aérospatiale - Matériaux non-métalliques - Textiles - Méthode d'essai - Détermination de la stabilitéAerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability49.025.60TekstilijeTextilesICS:Ta slovenski standard je istoveten z:EN 4505:2013SIST EN 4505:2014en01-februar-2014SIST EN 4505:2014SLOVENSKI
STANDARD
SIST EN 4505:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4505
July 2013 ICS 49.025.60 English Version
Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
Série aérospatiale - Matériaux non-métalliques - Textiles - Méthode d'essai - Détermination de la stabilité
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Textilien - Prüfverfahren - Bestimmung der Maßänderung This European Standard was approved by CEN on 8 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4505:2013: ESIST EN 4505:2014
EN 4505:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Health and safety . 4 5 Principle . 4 6 Apparatus . 4 7 Reagents . 5 8 Preparation of specimens . 5 9 Procedure . 5 10 Calculation and expression of results . 5 10.1 Calculation of dimensional stability . 5 11 Test report . 5
SIST EN 4505:2014
EN 4505:2013 (E) 3 Foreword This document (EN 4505:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.