49.025.60 - Textiles

This document specifies the sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns in terms of sample size and rejection criteria.
This document serves as a basis for the corresponding technical specification. It covers the inspection by attributes. The inspection by measurements (variables) will be added in subsequent edition. It is also planned to extend its scope of application to reinforcing woven fabrics.

This document specifies the sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns in terms of sample size and rejection criteria.
This document serves as a basis for the corresponding technical specification. It covers the inspection by attributes. The inspection by measurements (variables) will be added in subsequent edition. It is also planned to extend its scope of application to reinforcing woven fabrics.

This document specifies the requirements for the determination of conductivity and pH of aqueous extracts of textile materials.
This method has been written in response to an aerospace requirement for a method of extraction using hot water as the EN 1413 requires only a cold water extraction method.

This document specifies the requirements for the determination of conductivity and pH of aqueous extracts of textile materials.
This method has been written in response to an aerospace requirement for a method of extraction using hot water as the EN 1413 requires only a cold water extraction methods.

This standard defines the requirements for the determination of the flexibility of narrow fabrics.

This standard specifies the procedure for the determination of water extractable matter of textile material.
This method has been written in response to an aerospace requirement for a method of extraction using hot water.

This standard specifies the determination of water soluble chloride and sulphate of aqueous extracts of textile materials.
This method has been written in response to an aerospace requirement for a method of extraction using hot water, this method should be used in conjunction with EN 4426.

This standard specifies the procedure for the determination of dimensional stability of narrow fabrics.

This European Standard specifies the procedure for the determination of dimensional stability of narrow fabrics.

This European Standard specifies the determination of water soluble chloride and sulphate of aqueous extracts of textile materials. This method has been written in response to an aerospace requirement for a method of extraction using hot water, this method should be used in conjunction with EN 4426.

This European Standard defines the requirements for the determination of the flexibility of narrow fabrics.

This European Standard specifies the procedure for the determination of water extractable matter of textile material. This method has been written in response to an aerospace requirement for a method of extraction using hot water.

This standard defines the general requirements for the determination of warp bow of narrow woven fabrics by measurement testing.

This standard defines the requirements for manufacture, inspection and testing of narrow woven fabrics for aerospace applications.

This standard defines the requirements for manufacture, inspection and testing of wide woven fabrics for aerospace applications.

This standard defines the requirements for manufacture, inspection and testing of wide woven fabrics for aerospace applications.

This standard defines the requirements for manufacture, inspection and testing of narrow woven fabrics for aerospace applications.

This standard defines the general requirements for the determination of warp bow of narrow woven fabrics by measurement testing.

This standard specifies a method for determining the resin flow of a textile glass fibre fabric preimpregnate, for aerospace use. This standard does not give any directive necessary to meet the health and safety requirements. It is the responsibility of the user of this standard to adopt appropriate health and safety precautions.

This standard specifies a method for determining the percentage of volatile matter in a textile glass fibre preimpregnate, for aerospace use. This standard does not give any directives necessary to meet the health and safety requirements. It is the responsibility of the user of this standard to adopt appropriate health and safety precautions.

This standard specifies a method for determining the resin content (with or without volatiles) and fibre content and mass of fibre per unit area of a textile glass fibre preimpregnate by ignition and solvent extraction, for aerospace use.

This standard specifies a method for determining the mass per unit area of a textile glass fibre preimpregnate, for aerospace use. This standard does not give any directives necessary to meet the health and safety requirements. It is the responsibility of the user of this standard to adopt appropriate health and safety precautions.

This standard specifies a method for determining the resin flow of carbon fibre preimpregnates for aerospace applications.

This standard specifies a method for determining the volatile content in carbon fibre preimpregnates for aerospace applications.

This standard specifies a method for determining the mass per unit area of a textile glass fibre preimpregnate, for aerospace use. This standard does not give any directives necessary to meet the health and safety requirements. It is the responsibility of the user of this standard to adopt appropriate health and safety precautions.

This standard specifies a method for determining the resin content (with or without volatiles) and fibre content and mass of fibre per unit area of a textile glass fibre preimpregnate by ignition and solvent extraction, for aerospace use.

This standard specifies a method for determining the percentage of volatile matter in a textile glass fibre preimpregnate, for aerospace use. This standard does not give any directives necessary to meet the health and safety requirements. It is the responsibility of the user of this standard to adopt appropriate health and safety precautions.

This standard specifies a method for determining the resin flow of a textile glass fibre fabric preimpregnate, for aerospace use. This standard does not give any directive necessary to meet the health and safety requirements. It is the responsibility of the user of this standard to adopt appropriate health and safety precautions.