EN 3675:2022
(Main)Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns
Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns
This document specifies the sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns in terms of sample size and rejection criteria.
This document serves as a basis for the corresponding technical specification. It covers the inspection by attributes. The inspection by measurements (variables) will be added in subsequent edition. It is also planned to extend its scope of application to reinforcing woven fabrics.
Luft- und Raumfahrt - Stichprobenanweisung für die Abnahmeprüfung von Aramid-, Kohlenstoff- und Textilglasfilamentgarnen
Dieses Dokument legt die Stichprobenanweisung für die Abnahmeprüfung von Aramid-, Kohlenstoff- und Textilglas-Filamentgarnen fest. Hierbei werden der Stichprobenumfang und die Rückweisungskriterien festgelegt.
Dieses Dokument dient als Grundlage für die entsprechenden Technischen Lieferbedingungen. Es behandelt die Attributprüfung. In einer späteren Folgeausgabe dieses Dokuments soll die Variablenprüfung zusätzlich aufgenommen werden. Ebenso ist die Ausweitung auf Verstärkungsgewebe vorgesehen.
Série aérospatiale - Plan d'échantillonnage pour les essais de réception des fils d'aramide, de fibres de carbone et de silionne
Le présent document spécifie le plan d'échantillonnage pour les essais de réception des fils d'aramide, de fibres de carbone et de silionne en termes de taille d'échantillon et de critères de rejet.
Ce document sert de base à la spécification technique correspondante. Il couvre le contrôle par attributs. Le contrôle par mesures (variables) sera ajouté dans l’édition suivante. Il est également prévu d'étendre son champ d'application au renfort des tissus.
Aeronavtika - Načrt vzorčenja za preskušanje sprejemljivosti aramidnih in ogljikovih vlaken ter tekstilne steklene filamentne preje
Ta dokument določa načrt vzorčenja za preskušanje sprejemljivosti aramidnih in ogljikovih vlaken ter tekstilne steklene filamentne preje z vidika velikosti vzorca in meril za zavrnitev.
Ta dokument se uporablja kot osnova za ustrezno tehnično specifikacijo. Obravnava kontrolo po opisnih spremenljivkah. Kontrola z merjenjem (spremenljivk) bo dodana v naslednji izdaji. Načrtovana je tudi razširitev področja uporabe na ojačitvene tkanine.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3675:2023
01-marec-2023
Aeronavtika - Načrt vzorčenja za preskušanje sprejemljivosti aramidnih in
ogljikovih vlaken ter tekstilne steklene filamentne preje
Aerospace series - Sampling plan for acceptance testing of aramid, carbon fibre and
textile glass filament yarns
Luft- und Raumfahrt - Prüfplan für die Abnahmeprüfung von Aramid-, Kohlenstoff- und
Textilglasfilamentgarnen
Série aérospatiale - Plan d'échantillonnage pour le contrôle de réception des fils continus
d'aramide, de carbone et de verre textile
Ta slovenski standard je istoveten z: EN 3675:2022
ICS:
49.025.60 Tekstilije Textiles
SIST EN 3675:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3675:2023
---------------------- Page: 2 ----------------------
SIST EN 3675:2023
EN 3675
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.60
English Version
Aerospace series - Sampling plan for acceptance testing of
aramid, carbon fibre and textile glass filament yarns
Série aérospatiale - Plan d'échantillonnage pour le Luft- und Raumfahrt - Prüfplan für die
contrôle de réception des fils continus d'aramide, de Abnahmeprüfung von Aramid-, Kohlenstoff- und
carbone et de verre textile Textilglasfilamentgarnen
This European Standard was approved by CEN on 24 July 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3675:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3675:2023
EN 3675:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Acceptance sampling plan . 4
4.1 Sampling . 4
4.2 Evaluation . 6
4.2.1 Inspection of visually detectable nonconformities . 6
4.2.2 Measurable product characteristics . 6
4.3 Laminate inspection . 6
4.4 Test report . 7
Bibliography . 8
2
---------------------- Page: 4 -----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.