EN 771-6:2011/FprA1
(Amendment)Specification for masonry units - Part 6: Natural stone masonry units
Specification for masonry units - Part 6: Natural stone masonry units
This European Standard specifies the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the main intended uses are common, facing or exposed masonry units in load bearing or non-load bearing building and civil engineering applications These units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption. This European Standard includes natural stone masonry units of an overall non-rectangular parallelepiped shape, specially shaped and accessory units for internal and external application. It defines the performance related to e.g. strength, petrographic description, density, porosity, dimensional accuracy, thermal conductivity, water absorption, and frost resistance and provides for the evaluation of conformity of the product to this European Standard. The marking requirements for products covered by this European Standard are also included. This European Standard does not cover storey height panels, natural stone for paving, chimney flue linings nor units intended for use as damp proof course.
Festlegungen für Mauersteine - Teil 6: Natursteine
Spécification pour éléments de maçonnerie - Partie 6: Eléments de maçonnerie en pierre naturelle
Specifikacija za zidake - 6. del: Zidaki iz naravnega kamna
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 771-6:2011/kFprA1:2014
01-oktober-2014
Specifikacija za zidake - 6. del: Zidaki iz naravnega kamna
Specification for masonry units - Part 6: Natural stone masonry units
Festlegungen für Mauersteine - Teil 6: Natursteine
Spécification pour éléments de maçonnerie - Partie 6: Eléments de maçonnerie en pierre
naturelle
Ta slovenski standard je istoveten z: EN 771-6:2011/FprA1
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 771-6:2011/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 771-6:2011/kFprA1:2014
---------------------- Page: 2 ----------------------
SIST EN 771-6:2011/kFprA1:2014
EUROPEAN STANDARD
FINAL DRAFT
EN 771-6:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2014
ICS 91.100.15
English Version
Specification for masonry units - Part 6: Natural stone masonry
units
Spécification pour éléments de maçonnerie - Partie 6: Festlegungen für Mauersteine - Teil 6: Natursteine
Eléments de maçonnerie en pierre naturelle
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 125.
This draft amendment A1, if approved, will modify the European Standard EN 771-6:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 771-6:2011/FprA1:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 771-6:2011/kFprA1:2014
EN 771-6:2011/FprA1:2014 (E)
Contents
Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to the Scope .4
3 Modification to 5.1, General .4
4 Modification to 5.2, Denomination .4
5 Modification to 5.4, Configuration .4
6 Modification to 5.4.1, General .4
7 Modification to 5.4.2, Surface appearance .4
8 Modification to 5.6.1, Compressive strength .5
9 Modification to 5.6.2, Flexural strength .5
10 Modification to 5.7.1, General .5
11 Addition of a new subclause 5.15 .5
12 Modification to 6.1, Description and desig
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.