EN 2622:2001

Aerospace series - Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Circular tubes, for fluids
in heat resisting alloys
Diameter 3,2 mm £ D £ 100 mm
for aerospace applications.

Luft- und Raumfahrt - Runde Leitungsrohre aus hochwarmfesten Legierungen - Durchmesser 3,2 mm # D # 100 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Runden Leitungsrohren
aus hochwarmfesten Legierungen
Durchmesser 3,2 mm = D = 100 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Tubes circulaires, pour canalisations en alliages résistant à chaud - Diamètres 3,2 mm < = D < = 100 mm - Dimensions

Aerospace series - Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm - Dimensions

General Information

• Status: Published
• Publication Date: 18-Sep-2001
• Withdrawal Date: 30-Mar-2002
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 2622:2002 - Aerospace series - Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm - Dimensions

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm - DimensionsLuft- und Raumfahrt - Runde Leitungsrohre aus hochwarmfesten Legierungen - Durchmesser 3,2 mm # D # 100 mm - MaßeSérie aérospatiale - Tubes circulaires, pour canalisations en alliages résistant a chaud - Diametres 3,2 mm < =
D < = 100 mm - DimensionsAerospace series - Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < =
D < =
100 mm - Dimensions49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 2622:2001SIST EN 2622:2002en01-januar-2002SIST EN 2622:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2622September 2001ICS 49.080English versionAerospace series - Circular tubes, for fluids in heat resistingalloys - Diameter 3,2 mm
D
100 mm - DimensionsSérie aérospatiale - Tubes circulaires, pour canalisationsen alliages résistant à chaud - Diamètres 3,2 mm
D 100 mm - DimensionsLuft- und Raumfahrt - Runde Leitungsrohre aushochwarmfesten Legierungen - Durchmesser 3,2 mm
D 100 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2622:2001 ESIST EN 2622:2002
...