EN ISO 24343-1:2012

Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)

ISO 24343-1:2007 describes a method for determining the residual indentation produced in a resilient or laminate floor covering after the application and removal of a constant load.

Elastische und Laminat-Bodenbeläge - Bestimmung des Eindrucks und des Resteindrucks - Teil 1: Resteindruck (ISO 24343-1:2007)

Der vorliegende Teil der ISO 24343 legt ein Verfahren zur Bestimmung des Resteindruckes in einem elastischen oder Laminat Bodenbelag nach dem Be  und Entlasten mit einer konstanten Last fest.

Revêtements de sol résilients et stratifiés - Détermination du poinçonnement et du poinçonnement rémanent - Partie 1: Poinçonnement rémanent (ISO 24343-1:2007)

Netekstilne in laminatne talne obloge - Ugotavljanje vtiska in preostalega vtiska - 1. del: Preostali vtisk (ISO 24343-1:2007)

Ta del standarda ISO 24343 opisuje metodo za ugotavljanje preostalega vtiska, ki nastane na netekstilnih in laminatnih talnih oblogah po namestitvi in odstranitvi stalnega bremena.

General Information

• Status: Published
• Publication Date: 24-Jan-2012
• Withdrawal Date: 30-Jul-2012
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 7 - Resilient floor coverings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Jan-2012
• Due Date: 23-Feb-2013
• Completion Date: 25-Jan-2012
• Ref Project: SIST EN ISO 24343-1:2012 - Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)

Relations

• Replaces: EN 433:1994 - Resilient floor coverings - Determination of residual indentation after static loading
• Effective Date: 01-Feb-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24343-1:2012
01-marec-2012
1DGRPHãþD
SIST EN 433:1999
Netekstilne in laminatne talne obloge - Ugotavljanje vtiska in preostalega vtiska -
1. del: Preostali vtisk (ISO 24343-1:2007)
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 1: Residual indentation (ISO 24343-1:2007)
Elastische und Laminat-Bodenbeläge - Bestimmung des Eindrucks und des
Resteindrucks - Teil 1: Resteindruck (ISO 24343-1:2007)
Revêtements de sol résilients et stratifiés - Détermination du poinçonnement et du
poinçonnement rémanent - Partie 1: Poinçonnement rémanent (ISO 24343-1:2007)
Ta slovenski standard je istoveten z: EN ISO 24343-1:2012
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
SIST EN ISO 24343-1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 24343-1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 24343-1:2012


EUROPEAN STANDARD
EN ISO 24343-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2012
ICS 97.150 Supersedes EN 433:1994
English Version
Resilient and laminate floor coverings - Determination of
indentation and residual indentation - Part 1: Residual
indentation (ISO 24343-1:2007)
Revêtements de sol résilients et stratifiés - Détermination Elastische und Laminat-Bodenbeläge - Bestimmung des
du poinçonnement et du poinçonnement rémanent - Partie Eindrucks und des Resteindrucks - Teil 1: Resteindruck
1: Poinçonnement rémanent (ISO 24343-1:2007) (ISO 24343-1:2007)
This European Standard was approved by CEN on 17 December 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24343-1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 24343-1:2012
EN ISO 24343-1:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 24343-1:2012
EN ISO 24343-1:2012 (E)
Foreword
The text of ISO 24343-1:2007 has been prepared by Technical Committee ISO/TC 219 “Floor coverings” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 24343-1:2012 by
Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the
latest by July 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 433:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 24343-1:2007 has been approved by CEN as a EN ISO 24343-1:2012 without any
modification.

3

---------------------- Page: 5
...