Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008)

ISO 27874:2008 specifies the requirements for electrodeposited gold and gold alloy coatings for electrical, electronic and other engineering applications on metallic and non-metallic substrates. It also specifies test methods for measuring the properties of the coatings.
Although this International Standard does not specify the condition, finish or surface roughness of the basis material prior to electroplating, the appearance and serviceability of electroplated gold or gold alloy coatings depends on the condition of the basis material. It is essential that the purchaser specify the surface finish and roughness of the basis material in order to conform to the product requirements.
This International Standard does not apply to coatings on threaded articles or to coatings on sheet or strip in non-fabricated form.

Metallische und andere anorganische Überzüge - Galvanische Gold- und Goldlegierungsüberzüge für elektrische, elektronische und technische Zwecke - Anforderungen und Prüfverfahren (ISO 27874:2008)

Diese Internationale Norm legt die Anforderung an galvanische Gold- und Goldlegierungs-Überzüge auf metallischen und nichtmetallischen Substraten für elektrische, elektronische und andere technische Anwendungen fest. Sie legt auch die Prüfverfahren zur Bestimmung der Eigenschaften dieser Überzüge fest.
Obgleich diese Internationale Norm Beschaffenheit, Finish und Rauheit des Grundmaterial vor der elektro-lytischen Abscheidung nicht festlegt, hängt das Aussehen und die Brauchbarkeit von galvanischen Gold- und Goldlegierungs-Überzügen von der Beschaffenheit des Grundmaterials ab. Es ist wesentlich, dass der Käufer Finish und Rauheit des Grundmaterials festlegt, um dadurch die Anforderungen an das Produkt zu bestätigen.
Diese Internationale Norm gilt nicht für Verbindungselemente mit Gewinden (siehe ISO 4042) oder für Über-züge auf Blechen und Bändern in unbearbeiteter Form.

Revêtements métalliques et autres revêtements inorganiques - Dépôts électrolytiques d'or et d'alliages d'or pour usages électrique, électronique et industriels - Spécification et méthodes d'essai (ISO 27874:2008)

L'ISO 27874:2008 spécifie les exigences relatives aux dépôts électrolytiques d'or et d'alliages d'or destinés à des applications électriques, électroniques et d'autres applications industrielles sur des substrats métalliques et non métalliques. Elle spécifie également les méthodes d'essai permettant de mesurer les propriétés des revêtements.
Bien que l'ISO 27874:2008 ne spécifie pas l'état initial, la finition ou la rugosité de surface du matériau de base avant le dépôt électrolytique, l'aspect et l'aptitude à l'usage des dépôts électrolytiques d'or ou d'alliages d'or dépendent de l'état du matériau de base. Il est essentiel que le client spécifie la finition de surface et la rugosité du matériau de base afin de se conformer aux exigences du produit.
L'ISO 27874:2008 ne s'applique ni aux revêtements déposés sur des éléments filetés, ni aux dépôts appliqués sur des tôles ou des bandes à l'état non usiné.

Kovinske prevleke - Galvansko nanašanje prevlek iz zlata in njegovih zlitin za uporabo na področju elektrike, elektronike in inženirstva - Specifikacija in preskusne metode (ISO 27874:2008)

General Information

Status
Published
Publication Date
14-Sep-2008
Withdrawal Date
30-Mar-2009
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Sep-2008
Completion Date
15-Sep-2008

Buy Standard

Standard
EN ISO 27874:2008
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 27874:2008
01-november-2008
.RYLQVNHSUHYOHNH*DOYDQVNRQDQDãDQMHSUHYOHNL]]ODWDLQQMHJRYLK]OLWLQ]D
XSRUDERQDSRGURþMXHOHNWULNHHOHNWURQLNHLQLQåHQLUVWYD6SHFLILNDFLMDLQ
SUHVNXVQHPHWRGH ,62
Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for
electrical, electronic and engineering purposes - Specification and test methods (ISO
27874:2008)
Metallische Überzüge - Galvanische Gold- und Goldlegierungsüberzüge für elektrische,
elektronische und technische Zwecke - Anforderungen und Prüfverfahren (ISO
27874:2008)
Revêtements métalliques et autres revêtements inorganiques - Dépôts électrolytiques
d'or et d'alliages d'or pour usages électrique, électronique et industriels - Spécification et
méthodes d'essai (ISO 27874:2008)
Ta slovenski standard je istoveten z: EN ISO 27874:2008
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 27874:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 27874:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 27874:2008
EUROPEAN STANDARD
EN ISO 27874
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 25.220.40

English Version
Metallic and other inorganic coatings - Electrodeposited gold
and gold alloy coatings for electrical, electronic and engineering
purposes - Specification and test methods (ISO 27874:2008)
Revêtements métalliques et autres revêtements Metallische Überzüge - Galvanische Gold- und
inorganiques - Dépôts électrolytiques d'or et d'alliages d'or Goldlegierungsüberzüge für elektrische, elektronische und
pour usages électrique, électronique et industriels - technische Zwecke - Anforderungen und Prüfverfahren
Spécification et méthodes d'essai (ISO 27874:2008) (ISO 27874:2008)
This European Standard was approved by CEN on 13 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 27874:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 27874:2008
EN ISO 27874:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 27874:2008
EN ISO 27874:2008 (E)
Foreword
This document (EN ISO 27874:2008) has been prepared by Technical Committee ISO/TC 107 "Metallic and
other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at
the latest by March 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 27874:2008 has been approved by CEN as a EN ISO 27874:2008 without any modificati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.