EN 16511:2014/prA1

Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer

This European Standard specifies the characteristics of semi-rigid multilayer modular floor covering with a wear-resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are considered suitable for domestic and commercial levels of use and designed for floating installation.
This European Standard does not apply to resilient floor panels for loose-laying according to EN 14085, to multilayer wood floorings according to EN 13489, nor to products specified in EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This European Standard applies to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms or saunas, only if recommended by the producer.
This European Standard also includes requirements for marking and packaging.

Paneele für schwimmende Verlegung - Halbstarre, mehrlagige, modulare Fußbodenbeläge (MMF) mit abriebbeständiger Decklage

Panneaux pour pose flottante - Panneaux de revêtement de sol semi-rigides, multicouches et modulaires (MMF) avec couche supérieure résistante à l'usure

Prosto položene plošče - Večslojne poltoge talne obloge plošč z zgornjim delom, odpornim proti obrabi

General Information

• Status: Not Published
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 11 - Modular mechanical locked floor coverings (MMF)
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/119 REV1 - Amendment to mandate to CEN and CENELEC concerning the execution of standardisation work for harmonised standards on floor coverings
• Ref Project: SIST EN 16511:2014/oprA1:2018 - Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer

Relations

• Merged Into: EN 16511:2014+A1:2019 - Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer
• Effective Date: 19-Jan-2023
• Amends: EN 16511:2014 - Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer
• Effective Date: 09-Aug-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2018
3URVWRSRORåHQHSORãþH9HþVORMQHSROWRJHWDOQHREORJHSORãþ]]JRUQMLPGHORP
RGSRUQLPSURWLREUDEL
Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear
resistant top layer
Paneele für schwimmende Verlegung - Halbstarre, mehrlagige, modulare
Fußbodenbeläge (MMF) mit abriebbeständiger Decklage
Panneaux pour pose flottante - Panneaux de revêtement de sol semi-rigides,
multicouches et modulaires (MMF) avec couche supérieure résistante à l'usure
Ta slovenski standard je istoveten z: EN 16511:2014/prA1
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 16511:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2018
ICS 97.150
English Version
Loose-laid panels - Semi-rigid multilayer modular floor
covering (MMF) panels with wear resistant top layer
Panneaux pour pose flottante - Panneaux de Paneele für schwimmende Verlegung - Halbstarre,
revêtement de sol semi-rigides, multicouches et mehrlagige, modulare Fußbodenbeläge (MMF) mit
modulaires (MMF) avec couche supérieure résistante à abriebbeständiger Decklage
l'usure
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A1, if approved, will modify the European Standard EN 16511:2014. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware a
...