Resilient floor coverings - Cork floor tiles - Specification

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

Elastische Bodenbeläge - Presskorkplatten - Spezifikation

Dieses Dokument legt Anforderungen an Korkbodenbeläge aus Presskork – mit oder ohne dekorativer Deckschicht, mit oder ohne Einfärbungen – fest, die in Form von Platten geliefert werden und zur Verwendung mit einem Oberflächenfinish und/oder einer Versiegelung vorgesehen sind.
Die dekorative Deckschicht der Korkbodenbeläge kann aus Kork oder anderen biobasierten dekorativen Werkstoffen wie z. B. Holz- oder Bambusfurnieren, Linoleum, Leder oder Naturfasern bestehen.
Dieses Dokument enthält ein Klassifizierungssystem, das auf Basis der Nutzungsintensität zeigt, wo Bodenbeläge aus Presskork mit Oberflächenfinish einen zufriedenstellenden Nutzen liefern können (siehe EN ISO 10874). Es legt auch Anforderungen an die Kennzeichnung, Etikettierung und Verpackung fest.

Revêtements de sol résilients - Dalles en liège - Spécification

Le présent document spécifie les exigences des revêtements de sols en liège constitués d’un aggloméré de liège, avec ou sans couche de surface décorative, avec ou sans colorations, livrés sous forme de dalles et destinés à être utilisés avec une finition en usine et/ou une finition in situ.
La couche de surface décorative du sol en liège peut être constituée de liège ou d'autres matériaux décoratifs biosourcés, par exemple des placages de bois ou de bambou, du linoléum, du cuir ou des fibres naturelles.
Le présent document inclut un système de classification basé sur l’intensité d’utilisation, qui indique l’endroit où les dalles en liège avec une finition en usine peuvent rendre un service satisfaisant (voir EN ISO 10874). Il spécifie également les exigences de marquage, d’étiquetage et d’emballage.

Netekstilne talne obloge - Talne obloge iz plute - Specifikacija

Ta dokument določa zahteve za talne obloge iz plute, izdelane iz aglomerirane sestave plute z dekorativnim površinskim slojem ali brez njega, z naneseno barvo ali brez nje, ki je na voljo v obliki ploščic, namenjenih za tovarniško končno obdelavo in/ali končno obdelavo na mestu uporabe.
Dekorativne talne obloge iz plute so lahko izdelane iz plute ali drugih dekorativnih materialov na biološki osnovi, npr. lesni ali bambusov furnir, linolej, usnje ali naravna vlakna.
Ta dokument vsebuje sistem razvrščanja na podlagi intenzivnosti uporabe, ki kaže, kje bi se talne obloge iz plute s tovarniškim zaključkom lahko zadovoljivo uporabljale (glej standard EN ISO 10874). Določa tudi zahteve za označevanje, etiketiranje in pakiranje.

General Information

Status
Published
Publication Date
16-May-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-May-2023
Due Date
01-May-2024
Completion Date
17-May-2023

Relations

Buy Standard

Standard
EN 12104:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2023
Netekstilne talne obloge - Talne obloge iz plute - Specifikacija
Resilient floor coverings - Cork floor tiles - Specification
Elastische Bodenbeläge - Presskorkplatten - Spezifikation
Revêtements de sols résilients - Dalles en liège - Spécification
Ta slovenski standard je istoveten z: EN 12104:2023
ICS:
79.100 Pluta in izdelki iz plute Cork and cork products
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 12104
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2023
EUROPÄISCHE NORM
ICS 79.100; 97.150 Supersedes EN 12104:2018
English Version
Resilient floor coverings - Cork floor tiles - Specification
Revêtements de sol résilients - Dalles en liège - Elastische Bodenbeläge - Presskorkplatten -
Spécification Spezifikation
This European Standard was approved by CEN on 28 February 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12104:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 General requirements . 5
4.2 Classification requirements . 5
5 Marking, labelling and packing . 7
Annex A (informative) Optional properties . 8
Annex B (informative) Supplementary information . 9
Bibliography .10

European foreword
This document (EN 12104:2023) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2023, and conflicting national standards shall
be withdrawn at the latest by November 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12104:2018.
The main changes compared to the previous edition are listed below:
— Scope review.
— Normative references.
— General requirements:
1) Dimensional stability requirement and test method.
— Classification requirements:
1) Residual indentation requirements review based on apparent density value.
2) Effect of Castor chair requirements review, surface type notes and test method update.
3) Wear resistance eliminate option EN 13329:2016+A1:2017, Annex E, and requirements review
for varnish surfaces.
— Optional Properties review.
— Bibliography update.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies the requirements for cork floor coverings made from agglomerated composition
cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form
which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g.
wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor
tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements
for marking, labelling and packing.
2 Normative references
The following documents are referred to in th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.