iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 8394-2:2010/AC:2011

(Corrigendum)

Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)

Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)

This part of ISO 8394 specifies a method for determining the extrudability of sealants independently of the package in which they are supplied. It is not applicable to the classification of sealants.

Hochbau - Fugendichtstoffe - Teil 2: Bestimmung der Verarbeitbarkeit von Dichtstoffen mit genormtem Gerät (ISO 8394-2:2010)

Construction immobilière - Produits pour joints - Partie 2: Détermination de l'extrudabilité des mastics au moyen d'un appareil normalisé (ISO 8394-2:2010)

Gradnja objektov - Sredstva za stikovanje - 2. del: Ugotavljanje iztisljivosti tesnil s standardizirano opremo (ISO 8394-2:2010)

Ta del ISO 8394 opredeljuje metodo za ugotavljanje iztisljivosti tesnil neodvisno od embalaže, v kateri so dostavljeni. Ne velja za klasifikacijo tesnil.

General Information

Status
Withdrawn
Publication Date
03-May-2011
Withdrawal Date
21-Nov-2017
ICS
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 349 - Sealants for joints in building construction
Drafting Committee
CEN/TC 349 - Sealants for joints in building construction
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
22-Nov-2017
Ref Project
SIST EN ISO 8394-2:2011/AC:2011 - Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)

Relations

Replaced By
EN ISO 8394-2:2017 - Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017)
Effective Date
11-Jan-2017
Corrects
EN ISO 8394-2:2010 - Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 8394-2:2011/AC:2011EN ISO 8394-2:2011/AC:2011
PreviousNext
Corrigendum
EN ISO 8394-2:2011/AC:2011
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradnja objektov - Sredstva za stikovanje - 2. del: Ugotavljanje iztisljivosti tesnil s standardizirano opremo (ISO 8394-2:2010)Hochbau - Fugendichtstoffe - Teil 2: Bestimmung der Verarbeitbarkeit von Dichtstoffen mit genormtem Gerät (ISO 8394-2:2010)Construction immobilière - Produits pour joints - Partie 2: Détermination de l'extrudabilité des mastics au moyen d'un appareil normalisé (ISO 8394-2:2010)Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN ISO 8394-2:2010/AC:2011SIST EN ISO 8394-2:2011/AC:2011en01-julij-2011SIST EN ISO 8394-2:2011/AC:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 8394-2:2010/AC
May 2011
Mai 2011
Mai 2011 ICS 91.100.50 English version Version Française Deutsche Fassung
Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010) Construction immobilière - Produits pour joints - Partie 2: Détermination de l'extrudabilité des mastics au moyen d'un appareil normalisé (ISO 8394-2:2010)
Hochbau - Fugendichtstoffe - Teil 2: Bestimmung der
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21265:2024(Main)
Building and civil engineering sealants - Assessment of the fungal growth on sealant surfaces (ISO 21265:2021)
SIST EN ISO 21265:2024

This document specifies a method for the evaluation of the fungal growth on sealants which are used in joints in building construction.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15434-1:2023(Main)
Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
SIST EN 15434-1:2023

This document covers the requirements for, and testing of sealants for use in one or more of the following applications:
a)   Manufacturing of insulating glass units where direct ultraviolet resistance and mechanical resistance (bonding use) of the insulating glass edge seal are required;
b)   Manufacturing of factory-made bonded sealant glazing elements when referred to by the relevant European Standards and/or European Technical Approval Guidelines;
c)   Assembling of glass products into or onto supports, where also direct ultraviolet resistance and/or mechanical resistance (bonding use) of the seal are required, under controlled environmental conditions as described in EN 13022-2.
This document covers the evaluation of conformity and the factory production control with respect to the production of sealants in conformity with this document.
This document describes the role of sealants that are in conformity with this document, with respect to sealing and bonding.
This document does not apply to sealants for the manufacture of insulating glass units where the seal is fully protected, i.e. by a frame, from ultraviolet radiation.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8394-2:2017(Main)
Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017)
SIST EN ISO 8394-2:2018

ISO 8394-2 specifies a method for determining the extrudability of sealants independently of the package in which they are supplied.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15651-4:2017/AC:2017(Corrigendum)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
SIST EN 15651-4:2017/AC:2017

Corrigendum issued due to mistake from TC in Table ZA.1 (SV on 2017-06-02)

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15651-5:2017(Main)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
SIST EN 15651-5:2017

This European Standard specifies procedures for assessment and verification of constancy of performance of sealants for non-structural use in joints in building construction and pedestrian walkways.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15651-3:2017(Main)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
SIST EN 15651-3:2017

This European Standard specifies definitions and requirements for sealants used for sealing of joints applied in sanitary areas in the interior of buildings exposed to non-pressurized water.
It covers joints in:
-   bathrooms;
-   toilets;
-   showers;
-   domestic kitchens;
-   prefabricated elements in sanitary areas (e.g. shower cubicles).
Industrial, drinking water, underwater (swimming pools, sewage systems, etc.), food contact applications and sealing of glass-ceramic cooktop panels (stove tops, ceramic hobs) are excluded from the scope.
This European Standard does not provide criteria or recommendations for the design of joints and installation of sealants in sanitary applications.
NOTE   Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5.
This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in sanitary joints and to oil-based mastics.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15651-4:2017(Main)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
SIST EN 15651-4:2017

This European Standard specifies definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use.
Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses.
NOTE   Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5.
Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals and seals in wood floors are excluded.
This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in pedestrian walkways.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15651-2:2017(Main)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
SIST EN 15651-2:2017

This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications.
It covers glazing joints from 7° horizontal. Main areas of application are:
-   glass to glass;
-   glass to frame;
-   glass to porous substrates.
Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7°), organic glass (e.g. polycarbonate, PMMA, etc.).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17068:2017(Main)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP)
SIST-TP CEN/TR 17068:2017

This Technical Report provides guidance for CE marking and Declaration of Performance (DoP) for sealants for joints in building construction.

  • Technical report
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15651-1:2017(Main)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
SIST EN 15651-1:2017

This European Standard specifies definitions and requirements for non-structural facade sealants intended for sealing exterior wall joints, window and door perimeter joints in building construction, including the interior face.
NOTE   Provisions on assessment and verification of constancy of performance - AVCP (i.e. Product type determination and Factory Production Control) and marking of these products are given in EN 15651-5.
This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in interior walls and/or partitions and to oil-based mastics.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day