Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.

Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Teil 1: Wertschutzschränke, Wertschutzschränke für Geldautomaten, Wertschutzraumtüren und Wertschutzräume

Auf Grundlage dieses Dokuments werden freistehende Wertschutzschränke, Einbauschränke (Boden und Wand), Wertschutzschränke für Geldautomaten (ATM-Safes) und ATM-Sockel, Wertschutzraumtüren sowie Wertschutzräume (mit oder ohne Tür) nach ihrem Widerstandswert gegen Einbruchdiebstahl geprüft und klassifiziert.
Dieses Dokument gilt nicht für die Prüfung und Klassifizierung von Deposit-Systemen und Geldautomaten (ATM-Systemen).

Unités de stockage en lieux sûrs - Prescriptions, classification et méthodes d’essai pour la résistance à l'effraction - Partie 1 : Coffres forts, distributeurs automatiques de billets (DAB), portes fortes et chambres fortes

Le présent document spécifie les conditions d'essai et de classification des coffres-forts à poser, encastrés (dans le sol et les murs), des coffres-forts de DAB et des chaises de DAB, des portes fortes et des chambres fortes (avec ou sans porte) en fonction de leur résistance à l’effraction.
Le présent document ne couvre pas les essais et la classification des systèmes de dépôt et des systèmes de DAB.

Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - 1. del: Blagajne, bankomatne blagajne, vrata trezorskih prostorov in trezorski prostori

Ta evropski standard določa osnovo za preskušanje in klasifikacijo samostoječih blagajn, vgrajenih blagajn (v tleh ali steni), bankomatnih blagajn in bankomatnih baz, vrat trezorskih prostorov in trezorskih prostorov (z vrati ali brez njih) glede na njihovo protivlomno odpornost. Ta evropski standard ne zajema preskušanja in klasifikacije depozitnih sistemov in bankomatnih sistemov.

General Information

Status
Published
Publication Date
16-Apr-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
17-Apr-2019
Completion Date
17-Apr-2019

RELATIONS

Buy Standard

Standard
EN 1143-1:2019
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 1143-1:2019
01-julij-2019
Nadomešča:
SIST EN 1143-1:2012
Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja
protivlomne odpornosti - 1. del: Blagajne, bankomatne blagajne, vrata trezorskih
prostorov in trezorski prostori

Secure storage units - Requirements, classification and methods of test for resistance to

burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des
Widerstandes gegen Einbruchdiebstahl - Teil 1: Wertschutzschränke,
Wertschutzschränke für Geldautomaten, Wertschutzraumtüren und Wertschutzräume

Unités de stockage en lieux sûrs - Prescriptions, classification et méthodes d’essai pour

la résistance à l'effraction - Partie 1 : Coffres forts, distributeurs automatiques de billets

(DAB), portes fortes et chambres fortes
Ta slovenski standard je istoveten z: EN 1143-1:2019
ICS:
13.310 Varstvo pred kriminalom Protection against crime
35.220.99 Druge naprave za Other data storage devices
shranjevanje podatkov
SIST EN 1143-1:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1143-1:2019
---------------------- Page: 2 ----------------------
SIST EN 1143-1:2019
EN 1143-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 13.310 Supersedes EN 1143-1:2012
English Version
Secure storage units - Requirements, classification and
methods of test for resistance to burglary - Part 1: Safes,
ATM safes, strongroom doors and strongrooms

Unités de stockage en lieux sûrs - Prescriptions, Wertbehältnisse - Anforderungen, Klassifizierung und

classification et méthodes d'essai pour la résistance à Methoden zur Prüfung des Widerstandes gegen

l'effraction - Partie 1 : Coffres forts, distributeurs Einbruchdiebstahl - Teil 1: Wertschutzschränke,

automatiques de billets (DAB), portes fortes et Wertschutzschränke für Geldautomaten,

chambres fortes Wertschutzraumtüren und Wertschutzräume
This European Standard was approved by CEN on 1 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1143-1:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 4

Introduction .................................................................................................................................................................... 5

1 Scope .................................................................................................................................................................... 6

2 Normative references .................................................................................................................................... 6

3 Terms and definitions ................................................................................................................................... 6

4 Classification and requirements ................................................................................................................ 9

4.1 Classification ..................................................................................................................................................... 9

4.2 General requirements ................................................................................................................................... 9

4.2.1 Safes, strongroom doors and strongrooms............................................................................................ 9

4.2.2 ATM safes ........................................................................................................................................................... 9

4.2.3 Boltwork cover plate .................................................................................................................................. 10

4.2.4 Cable hole ........................................................................................................................................................ 10

4.2.5 User instructions .......................................................................................................................................... 10

4.3 Additional requirements for EX designation ..................................................................................... 10

4.4 Additional requirements for GAS designation .................................................................................. 10

4.5 Additional requirements for CD designation ..................................................................................... 10

4.6 Additional requirements for T2 designation ..................................................................................... 11

5 Technical documentation .......................................................................................................................... 15

6 Test specimen ................................................................................................................................................ 16

7 Tool attack test .............................................................................................................................................. 16

7.1 Principle .......................................................................................................................................................... 16

7.2 Testing team................................................................................................................................................... 17

7.3 Apparatus ........................................................................................................................................................ 17

7.3.1 Attack tools ..................................................................................................................................................... 17

7.3.2 Clock .................................................................................................................................................................. 17

7.3.3 Test blocks ...................................................................................................................................................... 18

7.4 Test criteria .................................................................................................................................................... 18

7.5 Testing programme ..................................................................................................................................... 19

7.5.1 Free-standing safes ...................................................................................................................................... 19

7.5.2 Built-in safes .................................................................................................................................................. 19

7.5.3 Strongrooms................................................................................................................................................... 19

7.5.4 ATM safes ........................................................................................................................................................ 20

7.6 Test conditions .............................................................................................................................................. 20

7.7 Procedure........................................................................................................................................................ 22

7.8 Operating time measuring ........................................................................................................................ 23

7.9 Calculation of resistance values .............................................................................................................. 24

7.10 Test record ..................................................................................................................................................... 24

8 Anchoring strength test ............................................................................................................................. 24

8.1 Free-standing safes ...................................................................................................................................... 24

8.1.1 Principle .......................................................................................................................................................... 24

8.1.2 Loading equipment ...................................................................................................................................... 25

8.1.3 Procedure........................................................................................................................................................ 25

---------------------- Page: 4 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)

8.1.4 Expression of test results ........................................................................................................................... 25

8.1.5 Test criteria .................................................................................................................................................... 26

8.2 ATM safes ......................................................................................................................................................... 26

8.2.1 Principle ........................................................................................................................................................... 26

8.2.2 Loading equipment ...................................................................................................................................... 26

8.2.3 Procedure ........................................................................................................................................................ 26

8.2.4 Expression of results ................................................................................................................................... 28

8.2.5 Test criteria .................................................................................................................................................... 28

9 EX explosive test ........................................................................................................................................... 28

9.1 Principle ........................................................................................................................................................... 28

9.2 Test specimen ................................................................................................................................................ 28

9.3 Explosives ........................................................................................................................................................ 28

9.4 Determination of active explosive charge mass ................................................................................ 29

9.5 Conditions for explosive attack test ....................................................................................................... 29

9.5.1 Safes and ATM safes ..................................................................................................................................... 29

9.5.2 Strongroom doors and strongrooms ..................................................................................................... 29

9.6 Calculation of resistance values for the post-detonation tool attack ........................................ 30

9.7 Test record ...................................................................................................................................................... 30

10 GAS explosive test ......................................................................................................................................... 30

10.1 Principle ........................................................................................................................................................... 30

10.2 Test specimen ................................................................................................................................................ 30

10.3 Gas ...................................................................................................................................................................... 31

10.4 Determination of gas charge volume ..................................................................................................... 31

10.5 Test equipment for gas attack testing ................................................................................................... 32

10.6 Procedure for gas attack testing ............................................................................................................. 32

10.7 Calculation of resistance values for the post-detonation tool attack ........................................ 32

10.8 Test record ...................................................................................................................................................... 33

10.9 Marking ............................................................................................................................................................ 33

11 Core drilling test ........................................................................................................................................... 33

11.1 Principle ........................................................................................................................................................... 33

11.2 Test specimen ................................................................................................................................................ 33

11.3 Apparatus ........................................................................................................................................................ 33

11.3.1 Safes ................................................................................................................................................................... 33

11.3.2 Strongroom doors and strongrooms ..................................................................................................... 34

11.4 Test method .................................................................................................................................................... 34

11.5 Calculation of resistance value ................................................................................................................ 34

11.6 Marking ............................................................................................................................................................ 34

12 Tool attack test T2 ........................................................................................................................................ 35

12.1 Principle ........................................................................................................................................................... 35

12.2 Marking ............................................................................................................................................................ 35

13 Test report ...................................................................................................................................................... 35

14 Marking ............................................................................................................................................................ 36

Annex A (normative) Attack tools ........................................................................................................................ 38

Annex B (normative) Attack tools T2 ................................................................................................................. 47

Annex C (informative) Examples for ATM systems and non-ATM systems .......................................... 52

Bibliography ................................................................................................................................................................. 54

---------------------- Page: 5 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
European foreword

This document (EN 1143-1:2019) has been prepared by Technical Committee CEN/TC 263 “Secure storage of

cash, valuables and data media”, the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by October 2019, and conflicting national standards shall be withdrawn

at the latest by October 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 1143-1:2012.
Compared with EN 1143-1:2012, the following changes were made:

a) requirements for the conduct of the additional T2 test have been added (4.1, 4.6, 12, 13.4, 14 c), Table 1,

Table 2 and Table 3). Products tested with these new tools which are listed in Annex B have a 'T2'

designation behind the resistance grade.
b) In Annex A, a power supply, a plug and a cable connector have been added.

c) The construction requirements for ATM safes of the resistance grade L have been deleted (7.5.5 has been

deleted, changes in Table 2 and 7.5.4 have been made).

d) For clarification 4.2.2 has been updated and an informative Annex C and text in the introduction has been

added for different types of ATM systems.

e) Updates have been integrated for the optional solid explosive test, above all: The explosive mass for the

EX-option in 9.4 was changed to “active explosive mass”, a definition for active explosive charge mass has

been added (3.24), instead of specific energy the explosive heat of the PETN is defined (9.3); the

detonation velocity of the PETN was raised from (7 000 ± 500) m/s to (7 500 ± 500) m/s (9.3); the

tolerance of the active explosive charge mass has been changed from ± 1 g to ± 2 %, the requirement that

test specimens shall have a certain internal capacity has been deleted from 9.2, the shape of the explosive

charge shall now be spherical for ATM safes and safes (see 9.5.1), the clause for not permitting the entry

of explosives through the cable-entry openings has been deleted (4.3). In addition, a note has been added

in Table 4.

f) Updates have been made in the optional gas explosive test: the background for using the amount of gas

for resistance grade II, III and IV has been explained in greater detail (5.8 f), 10.4) and for resistance grade

V, VI, VII and VIII a new formula has been integrated.

g) An additional test condition for cutting steel sheets has been added (Clause 2 and 7.6.7);

h) Editorial and minor changes have been integrated in the Clauses 3.10, 3.16, 3.17, 4.2.1, 6.1, 7.1, 7.3.1,

7.5.4.1, 7.5.4.2, 7.6.5, 7.6.6, 7.8, 9.5.2, 9.6, 10.4, 10.6, 11.3.1 and 11.3.2 as well as Figure 2.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

---------------------- Page: 6 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
Introduction

Tests are made, the results of which are used to classify the resistance to burglary. The resistance classification

can also be used for designing security systems with the provision that, depending on the criminal, the

conditions at the place of the crime and the availability of tools, considerably longer times are likely to occur

in real burglary attacks than in a test.

Manual tests are included, whose results and repeatability are dependent on the skill of the testing team.

Machine-related tests are under development and may be included when this European Standard is revised.

For ATM systems the tests and requirements in this European standard are based on the following

assumptions (conditions) of use:

— ATM system: assembly of sub-units which provides an ATM function and affords security to cash and/or

valuables (e.g. checks) stored within the ATM safe.

— For using of an ATM safe the ATM manufacturer is responsible for the secure storage of the cash and/or

valuables (e.g. checks).
Examples of different designs of ATM systems are given in Annex C.
---------------------- Page: 7 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
1 Scope

This document establishes the basis for testing and classifying free-standing safes, built-in safes (floor and

wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to

their burglary resistance.

This document does not cover testing and classifying Deposit Systems and ATM systems.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes

requirements of this document. For dated references, only the edition cited applies. For undated references,

the latest edition of the referenced document (including any amendments) applies.

EN 1300, Secure storage units - Classification for high security locks according to their resistance to unauthorized

opening

EN 10051, Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels -

Tolerances on dimensions and shape
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
safe

storage unit which protects its contents against burglary and when closed has at least one internal side ≤ 1 m

length
3.2
free-standing safe

safe whose protection against burglary depends only upon the materials and construction of its primary

manufacture and not upon materials added or attached during installation
3.3
built-in safe

safe whose protection against burglary is partly dependent upon materials incorporated into it, or attached to

it, during installation

Note 1 to entry: Under floor safes and wall safes are special types of built-in safes.

3.4
strongroom

storage unit which protects against burglary and when closed has internal side lengths in all directions > 1 m

Note 1 to entry: Strongrooms may be cast in situ, constructed from pre-fabricated elements or a combination of both.

---------------------- Page: 8 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
3.5
strongroom door
door with lock(s), boltwork and frame intended for giving access to a strongroom
3.6
ATM safe
safe forming part of an ATM system
3.7
ATM base

integral part of an ATM system located between the ATM safe and the surface to which the safe is to be

anchored
3.8
internal space

part of the interior of an ATM safe which is bounded by the inside surfaces of the ATM safe and the boltwork

cover plate(s) of the door of the ATM safe body
3.9
ATM
automatic teller machine
means for holding and processing cash and/or valuables

Note 1 to entry: For the purpose of this standard, automated teller machines, currency exchange machines, currency

recycling machines and machines such as teller assist machines are all considered types of ATM.

3.10
ATM-System

assembly of sub-units which provides an ATM function and affords security to cash and/or valuables stored

within the ATM safe
Note 1 to entry: An example of an ATM system is shown in Annex C.

Note 2 to entry: Of the sub-units shown in Annex C, the ATM mechanism and the ATM control unit are not tested

according to this European Standard.
3.11
accessories

installations/devices which are part of the structure or which pass through the structure of the strongroom

or strongroom door(s) for ventilation or for deposit of cash and valuables

Note 1 to entry: Accessories may be always open, usually open (but can be closed in case of emergency), or closed (but

can be opened if necessary).
3.12
operating time

time during which a tool is used attempting to create a change in the test specimen

Note 1 to entry: In the context of this standard, there are also operating times considered during which no visible

modifications/changes are caused to the test specimen.
---------------------- Page: 9 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
3.13
resistance unit

burglary resistance which results from one minute's use of a tool carrying the coefficient 1 and the basic value

3.14
resistance grade
classification designation for burglary resistance
3.15
resistance value
numerical value in resistance units calculated for each test
3.16
basic value
number in resistance units allocated to a particular tool

Note 1 to entry: The basic value represents problems in obtaining, transporting, conditions (e.g. water cooling and

power availability) and using the relevant tool at the site in question, and the necessary knowledge and experience for

its efficient use.
3.17
tool coefficient
number in resistance units per minute allocated to a group of tools

Note 1 to entry: For Annex A: The tool coefficient represents factors such as noise, smoke, fumes and other effects,

which increase the likelihood of a burglary attack being detected.

Note 2 to entry: For Annex B: The tool coefficient represents tool efficiency and factors such as noise, smoke, fumes

and other effects, which increase the likelihood of a burglary attack being detected.

3.18
boltwork

mechanism by which a closed door is held such that, until it is in the withdrawn position, the door cannot be

opened
3.19
lock

device able to recognize a coded input and which performs a blocking function on the boltwork or the door

3.20
relocking device

system comprising blocking and detecting elements which will prevent the boltwork from being withdrawn if

a burglary attack is detected

Note 1 to entry: A relocking device can be part of the locking mechanism (e.g. active or live relocker) or an independent

unit (e.g. passive relocker).
3.21
to close
to move the door so it becomes possible to bolt it
---------------------- Page: 10 ----------------------
SIST EN 1143-1:2019
EN 1143-1:2019 (E)
3.22
to bolt

to throw the boltwork or the bolt of the lock (if there is no boltwork) to a position where it fixes the door in

closed position
3.23
to lock
to block a thrown boltwork by action of a lock
3.24
active explosive charge mass
part of the solid explosive mass, which is pure PETN without any additives
4 Classification and requirements
4.1 Classification
Safes are classified to a resistance grade according to Table 1.
ATM safes are classified to a resistance grade according to Table 2.

Strongroom doors and strongrooms (with or without a door) are classified to a resistance grade according to

Table 3.

All products shall meet general requirements (4.2), products with EX, GAS, CD and T2 designation shall meet

additional requirements (4.3, 4.4, 4.5 and 4.6).
4.2 General requirements
4.2.1 Safes, strongroom doors and strongrooms

There shall be no holes through the protection material other than those necessary for locks, cables, anchoring

or for the fitting of accessories to strongroom doors and strongrooms.
Cable openings in safes, strongroom doors
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.