EN ISO 13906:2008
(Main)Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents (ISO 13906:2008)
Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents (ISO 13906:2008)
ISO 13906:2008 specifies a method for the determination of acid detergent fibre (ADF) insoluble residue and acid detergent lignin (ADL) in all types of animal feeding stuffs. The limit of determination is 1 % mass fraction for ADF and 1,5 % mass fraction for ADL.
A gravimetric routine and reference method is used.
Futtermittel - Bestimmung des Gehalts an Säure-Detergens-Faser (ADF) und Säure-Detergens-Lignin (ADL) (ISO 13906:2008)
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Gehalts an unlöslichen Säure-Detergens-Faserrückständen (ADF) und Säure-Detergens-Lignin (ADL) in allen Futtermittelarten fest. Die Bestimmungs¬grenze für ADF ist 1 % Massenanteil und 1,5 % Massenanteil für ADL.
Ein gravimetrisches Routine- und Referenzverfahren wird angewendet.
Aliments des animaux - Détermination des teneurs en fibres au détergent acide (ADF) et en lignine sulfurique (ADL) (ISO 13906:2008)
L'ISO 13906:2008 spécifie une méthode de détermination de la teneur en résidus fibreux insolubles dans le détergent acide [teneur en ADF (pour «Acid Detergent Fibre»)] et de la teneur en lignine sulfurique [teneur en ADL (pour «Acid Detergent Lignin»)] dans tous types d'aliments des animaux. La limite de détermination est de 1 % en fraction massique pour l'ADF et de 1,5 % en fraction massique pour l'ADL.
Une méthode gravimétrique et une méthode de référence sont utilisées.
Krma - Določevanje vsebnosti v kislem detergentu netopnih vlaken (ADF) in v kislem detergentu netopnega lignina (ADL) (ISO 13906:2008)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2008
.UPD'RORþHYDQMHYVHEQRVWLYNLVOHPGHWHUJHQWXQHWRSQLKYODNHQ $') LQY
NLVOHPGHWHUJHQWXQHWRSQHJDOLJQLQD $'/ ,62
Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent
lignin (ADL) contents (ISO 13906:2008)
Futtermittel - Bestimmung des Gehalts an Säure-Detergens-Faser (ADF) und Säure-
Detergens-Lignin (ADL) (ISO 13906:2008)
Aliments des animaux - Détermination des teneurs en fibres au détergent acide (ADF) et
en lignine sulfurique (ADL) (ISO 13906:2008)
Ta slovenski standard je istoveten z: EN ISO 13906:2008
ICS:
65.120 Krmila Animal feeding stuffs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13906
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 65.120
English Version
Animal feeding stuffs - Determination of acid detergent fibre
(ADF) and acid detergent lignin (ADL) contents (ISO
13906:2008)
Aliments des animaux - Détermination des teneurs en Futtermittel - Bestimmung des Gehalts an Säure-
fibres au détergent acide (ADF) et en lignine sulfurique Detergens-Faser (ADF) und Säure-Detergens-Lignin (ADL)
(ADL) (ISO 13906:2008) (ISO 13906:2008)
This European Standard was approved by CEN on 11 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13906:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This document (EN ISO 13906:2008) has been prepared by Technical Committee ISO/TC 34 "Agricultural
food products" in collaboration with Technical Committee CEN/TC 327 “Animal feeding stuffs - Methods of
sampling and analysis” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2009, and conflicting national standards shall be withdrawn at
the latest by January 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13906:2008 has been approved by CEN as a EN ISO 13906:2008 without any modification.
INTERNATIONAL ISO
STANDARD 13906
First edition
2008-07-15
Animal feeding stuffs — Determination of
acid detergent fibre (ADF) and acid
detergent lignin (ADL) contents
Aliments des animaux — Détermination des teneurs en fibres au
détergent acide (ADF) et en lignine sulfurique (ADL)
Reference number
ISO 13906:2008(E)
©
ISO 2008
ISO 13906:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 13906:2008(E)
Contents Page
Foreword. iv
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Principle.2
5 Reagents.2
6 Apparatus .3
7 Sampling.4
8 Preparation of test sample.4
9 Procedure .4
10 Calculation and expression of results.6
11 Precision.7
12 Test report .9
Annex A (informative) Results of interlaboratory test.10
Annex B (informative) Results of interlaboratory test.14
Bibliography .17
ISO 13906:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13906 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 10, Animal
feeding stuffs.
iv © ISO 2008 – All rights reserved
INTERNATIONAL STANDARD ISO 13906:2008(E)
Animal feeding stuffs — Determination of acid detergent fibre
(ADF) and acid detergent lignin (ADL) contents
WARNING — The use of this International Standard may involve hazardous materials, operations and
equipment. This International Standard does not purport to address any safety risks associated with
its use. It is the responsibility of the user of this International Standard to establish appropriate safety
and health practices and determine the applicability of local regulatory limitations prior to use.
1 Scope
This International Standard specifies a method for the determination of acid detergent fibre (ADF) insoluble
residue and acid detergent lignin (ADL) in all types of animal feeding stuffs. The limit of determination is 1 %
mass fraction for ADF and 1,5 % mass fraction for ADL.
A gravimetric routine and reference method is used.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 6498, Animal feeding stuffs — Preparation of test samples
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
acid detergent fibre content
ADF content
mass fraction of fibrous residue obtained after treatment with cationic detergent in 0,5 mol/l sulfuric acid,
primarily consisting of cellulose, lignin and insoluble protein complexes
NOTE The ADF mass fraction is expressed as a percentage.
3.2
acid detergent lignin content
ADL content
mass fraction of residue remaining after cellulose and other organic matter is solubilized by 72 % mass
fraction (12,00 mol/l) sulfuric acid
NOTE The ADL mass fraction is expressed as a percentage.
ISO 13906:2008(E)
4 Principle
ADF is determined in the first stage of the method.
Cationic detergent solution is used to remove acid-labile carbohydrates, protein that is not complexed into
Maillard products (heat damaged), and fats. The remaining fibrous residue is primarily cellulose and lignin
(plant products) or insoluble protein complexes (animal products and heat-damaged feeds). The residue is
weighed for the determination of ADF.
In the second stage, the remaining residue is solubilized by 72 % mass fraction (12,00 mol/l) sulfuric acid,
leaving the lignin (ADL) which is determined gravimetrically.
5 Reagents
Use only reagents of recognized analytical grade, unless otherwise specified, and only distilled or deionized
water or water of at least equivalent purity.
5.1 Acid detergent solution. Add 20 g cetyl(trimethyl)ammonium bromide (technical grade) to 1 l of
0,5 mol/l sulfuric acid, previously standardized. Agitate to aid dissolution.
5.2 Sulfuric acid, 72 % mass fraction (12,00 mol/l).
Standardize sulfuric acid (H SO ) to a relative density of 1,634 at 20 °C or 12,00 mol/l as follows.
2 4
Calculate the mass, in grams, of acid, m(H SO ), and the mass, in grams, of water, m(H O), needed to
2 4 2
prepare 1 000 ml of solution using Equations (1) and (2):
100××98,08 12
m(H SO )= (1)
w(H SO )
where w(H SO ) is the assay mass fraction of sulfuric acid, expressed as a percentage.
2 4
mm(H O)=×−(1000 1,634) (H SO ) (2)
where 1,634 is the relative density of 72 % mass fraction sulfuric acid.
Weigh water into a 1 000 ml volumetric flask and add the calculated amount of sulfuric acid slowly with
occasional swirling. Cool the flask in a water bath while adding the required mass of acid. Cool to 20 °C and
verify the volume. The meniscus should be within 0,5 cm of the calibration mark at 20 °C. If volume is too
large, remove 5 ml water and add 4,55 ml sulfuric acid. If volume is too small, remove 1,5 ml and add 2,5 ml
water. Repeat if necessary.
1)
5.3 Filtration aid, diatomaceous earth .
5.4 Acetone, technical grade.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.