EN ISO 10535:2006

Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)

ISO 10535:2006 specifies requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons as classified in ISO 9999:2002:
12 36 03 Mobile hoists with sling seats
12 36 04 Standing mobile hoists
12 36 06 Mobile hoists with solid seats
12 36 09 Hoist trolleys
12 36 12 Stationary hoists fixed to the wall/walls, floor and/or ceiling
12 36 15 Stationary hoists fixed to, mounted in or on another product
12 36 18 Stationary free-standing hoists
12 36 21 Body-support units for hoists
The requirements of ISO 10535:2006 are formulated with regard to the needs of both the disabled persons being hoisted and the attendant using the hoist.

Lifter zum Transport von behinderten Menschen - Anforderungen und Prüfverfahren (ISO 10535:2006)

Diese Internationale  Norm legt Anforderungen und Prüfverfahren für Lifter und Körperstützsysteme für den Transport behinderter Menschen fest, die in ISO 9999:2002 wie folgt klassifiziert sind:
12 36 03   fahrbare Lifter mit Gurtsitzen
12 36 04   fahrbare Stehlifter
12 36 06   fahrbare Lifter mit festen Sitzen
12 36 09   fahrbare Lifter mit Liege
12 36 12   stationäre Lifter mit Decken-, Wand- oder Bodenbefestigung
12 36 15   stationäre Lifter, die in, an oder auf einem anderen Objekt befestigt sind
12 36 18   stationäre, frei stehende Lifter
12 36 21   Körperstützsysteme für Lifter
Diese Internationale Norm gilt nicht für Einrichtungen zum Transport von Personen zwischen zwei Ebenen (Geschossen) eines Gebäudes.
Sie enthält keine Verfahren zur Bestimmung von Alterung oder Korrosion solcher Lifter und Körper-stützsysteme.
Die Anforderungen der vorliegenden Norm sind hinsichtlich der Bedürfnisse sowohl des zu hebenden Behinderten als auch der Hilfsperson, die den Lifter verwendet, formuliert.

Lève-personnes pour transférer des personnes handicapées - Exigences et méthodes d'essai (ISO 10535:2006)

L'ISO 10535:2006 spécifie les exigences et les méthodes d'essai concernant uniquement les lève-personnes et les éléments de soutien destinés au transfert de personnes handicapées, conformément à la classification donnée dans l'ISO 9999:2002:
12 36 03 Lève-personnes mobiles avec sangles
12 36 04 Releveurs mobiles
12 36 06 Lève-personnes mobiles avec sièges
12 36 09 Lève-personne horizontaux
12 36 12 Lève-personnes fixés au mur, entre les murs, au sol et/ou au plafond
12 36 15 Lève-personnes fixés à, montés dans ou sur un autre produit
12 36 18 Lève-personnes fixes simplement posés
12 36 21 Éléments de soutien pour lève-personnes
Les exigences de l'ISO 10535:2006 sont formulées en tenant compte des besoins éprouvés à la fois par les personnes handicapées transportées sur le lève-personne, et par l'accompagnateur utilisant celui-ci.

Dvigala za prestavljanje invalidnih oseb - Zahteve in preskusne metode (ISO 10535:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2006
• Withdrawal Date: 02-Nov-2021
• ICS: 11.180.10 - Aids and adaptation for moving
• Technical Committee: CEN/TC 293 - Technical aids for disabled persons
• Drafting Committee: CEN/TC 293/WG 3 - Hoists for the transfer of disabled persons
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 03-Nov-2021
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 10535:2007 - Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)

Relations

• Replaces: EN ISO 10535:1998 - Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:1998)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10535:2021 - Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021, Corrected version 2023-08)
• Effective Date: 10-Nov-2021
• Child: EN ISO 11334-4:1999 - Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dvigala za prestavljanje invalidnih oseb - Zahteve in preskusne metode (ISO 10535:2006)Lifter zum Transport von behinderten Menschen - Anforderungen und Prüfverfahren (ISO 10535:2006)Leve-personnes pour transférer des personnes handicapées - Exigences et méthodes d'essai (ISO 10535:2006)Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)11.180.10JLEDQMHAids and adaptation for movingICS:Ta slovenski standard je istoveten z:EN ISO 10535:2006SIST EN ISO 10535:2007en01-marec-2007SIST EN ISO 10535:2007SLOVENSKI
STANDARDSIST EN ISO 10535:20001DGRPHãþD



SIST EN ISO 10535:2007



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 10535December 2006ICS 11.180.10Supersedes EN ISO 10535:1998
English VersionHoists for the transfer of disabled persons - Requirements andtest methods (ISO 10535:2006)Lève-personnes pour transférer des personneshandicapées - Exigences et méthodes d'essai (ISO10535:2006)Lifter für Behinderte - Anforderungen und Prüfverfahren(ISO 10535:2006)This European Standard was approved by CEN on 18 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10535:2006: ESIST EN ISO 10535:2007



EN ISO 10535:2006 (E)
2
Foreword
This document (EN ISO 10535:2006) has been prepared by Technical Committee CEN/TC 293 "Assistive products for persons with disability", the secretariat of which is held by SIS, in collaboration with Technical Committee ISO/TC 173 "Technical systems and aids for disabled or handicapped persons".
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007.
This document supersedes EN ISO 10535:1998.
This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN ISO 10535:2007



EN ISO 10535:2006 (E)
3
ANNEX ZA (informative)
Clauses of this EN addressing essential requirements or other provisions of EU Directives
This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 93/42/EEC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this Standard and Directive 93/42/EEC
Clauses/sub-clauses of this European Standard
Corresponding essential requirements of Directive 93/42/EEC
Qualifying remarks/Notes 4 – 10 1 ISO 14971 (risk analysis part) is generally valid 4 – 10 2
4.7, 10.6 3
4.9, 4.10, 5.5, 6.5, 6.6, 10.8, 10.9 4
4 – 10 5
...