This document specifies requirements and test methods of rollators being used as assistive products for walking with wheels, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer including marking and labelling. The requirements and tests are based on every-day use of rollators as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes rollators specified for a user mass of no less than 35Â kg. This document is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISOÂ 11199-3 is applicable.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Draft
    31 pages
    English language
    sale 15% off
  • Draft
    33 pages
    French language
    sale 15% off
  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies apparatus, test methods, and disclosure requirements for determination of lateral stability properties of wheelchair seat cushions by measuring the response from the cushion to a shift in the centre of mass of the load on the cushion. It provides a method of determining changes in a particular physical and mechanical property of the cushion. It does not provide information specific to cushion performance for a particular individual user. It does not provide information related to anterior-posterior stability, nor to stability contributions from cushion edges. NOTEÂ 1Â Â Â Test conditions simulate a symmetric anatomy. NOTEÂ 2Â Â Â Loads are intended to represent those seen under the pelvis of a 40th to 60th percentile wheelchair user. This document is applicable to cushions used in situations other than a wheelchair.

  • Standard
    9 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off

This document specifies requirements and test methods to assess the resistance to ignition by smouldering cigarette equivalent of integrated or non-integrated components of a wheelchair intended to protect tissue integrity and/or provide postural support. The electronic ignition source is also a simulation of other potential sources of environmental ignition hazards. The tests measure only the resistance to ignition of the items tested, and not the ignitability of the complete wheelchair. It gives an indication, but cannot guarantee, the ignition behaviour of the assembled devices of a complete wheelchair. This document does not apply to resistance to ignition of structural parts of a wheelchair. This document does not cover changes in resistance to ignition as a result of regular washing or use of the postural support devices. This document does not apply to the control of risks created by electrical and electronic components. This document allows for the separate testing of components of a wheelchair that are normally used in the horizontal plane (e.g. a seat cushion) from those normally used in the vertical plane (e.g. a back support). This document describes testing an assembly of the composite of materials as used in the component. The results of the tests in this document do not give any indication of the resistance to ignition of any of the separate individual materials of the test sample. NOTEÂ Â Â Â Â The intent of this document is primarily to address components that interface with the human body, such as cushions for positioning, or whose described purpose is that of protecting skin tissue against pressure, shear, and maceration related damage, as well as textile, foam, and plastic-based postural support devices.

  • Standard
    18 pages
    English language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off

This document specifies requirements and test methods for walking frames used as assistive products for walking, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer, including marking and labelling. The requirements and tests are based on everyday use of walking frames as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes walking frames specified for a user mass of no less than 35Â kg.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off
  • Draft
    28 pages
    English language
    sale 15% off
  • Standard
    32 pages
    English language
    sale 15% off
  • Draft
    32 pages
    English language
    sale 15% off

1.1   This European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically operated stairlifts (chair, standing platform and wheelchair platform) affixed to a building structure, moving in an inclined plane and intended for use by persons with impaired mobility:
-   travelling over a stair or an accessible inclined surface;
-   intended for use by one person;
-   whose carriage is directly retained and guided by a guide rail or rails;
-   supported or sustained by rope (5.4.4), rack and pinion (5.4.5), chain (5.4.6), friction traction drive (5.4.7), and guided rope and ball (5.4.8).
1.2   The standard identifies hazards as listed in Clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
1.3   This European standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials the nature of which could lead to dangerous situations;
-   use of energy systems other than electricity;
-   hazards occurring during manufacture;
-   earthquakes, flooding, fire;
-   evacuation during a fire;
-   stairlifts for goods only;
-   concrete, hardcore, timber or other foundation or building arrangement;
-   design of anchorage bolts to the supporting structure.
NOTE   For the actual type of machinery, noise is not considered a significant nor relevant hazard.
1.4   This document is not applicable to power operated stairlifts which are manufactured before the date of publication of this document by CEN.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements and test methods for the testing strength, torque, and durability of parts, and stability and running durability as a whole for walking trolleys. This document also provides requirements relating to general safety, folding and adjusting mechanisms, lifting and carrying means, ergonomics and information supplied by the manufacturer including marking and labelling. The requirements and tests are based upon every-day usage of walking trolleys as assistive products for walking, for a maximum user mass as specified by the manufacturer. This document includes walking trolleys specified for a user mass of no less than 35kg. Excluded are rollators specified in ISO 11199-2.

  • Standard
    42 pages
    English language
    sale 15% off
  • Standard
    43 pages
    French language
    sale 15% off

This document specifies the test methods and requirements for determining the safety and performance of a manual and/or power wheelchair that incorporates technology to alter the posture of the wheelchair occupant, which are either electrically or manually operated by the occupant or assistant during normal wheelchair use. This can include recline, tilt, elevate and stand-up mechanisms or a combination of these. In order for a wheelchair to be able to recline, tilt, elevate and/or stand-up, the wheelchair requires additional mechanisms and mechanical structures to allow these features to operate. This document specifies the different functional and strength tests required to test these wheelchairs in critical configurations of their adjustable range. This document does not cover wheelchairs where the only operator adjustable body support system (OABSS) is adjustable limb or head postural support devices alone (e.g. elevating leg supports). This document does not include wheelchair and postural support device customization during initial or subsequent setup of a wheelchair for an individual occupant. It also does not reflect other factors that can influence wheelchair stability such as occupant movement, cushion thickness, and the addition of ancillary equipment (e.g. respiratory support items).

  • Standard
    20 pages
    English language
    sale 15% off

This document specifies test methods for determining the maximum speed of electrically powered wheelchairs, including scooters, intended to carry one person with a maximum nominal speed not exceeding 15 km/h (4,167 m/s) on a level surface.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 16840-2:2018 specifies apparatus, test methods and disclosure requirements for wheelchair seat cushions intended to maintain tissue integrity and prevent tissue trauma. Test conditions simulate a symmetric anatomy and posture and do not represent cushion performance for specific individual users. Loads are intended to represent those seen under the pelvis of a 50th percentile wheelchair user and are not intended to assess the weight capacity of the cushion or to characterize the cushion under bariatric loads. It is possible that not all test methods apply to existing and future cushion technologies. It does not include test methods or requirements for determining the fire resistance of cushions. ISO 16840-2:2018 can also be applicable to tissue integrity management devices used as other support systems, as well as to cushions used in situations other than a wheelchair.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off

ISO 7176-2:2017 specifies test methods for determining the dynamic stability of electrically powered wheelchairs. ISO 7176-2:2017 is applicable to electrically powered wheelchairs, including scooters, with a maximum nominal speed not exceeding 15 km/h, intended to carry one person. ISO 7176-2:2017 is not applicable to manual wheelchairs with add-on power kits used for, or to assist, propulsion.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off

IMPORTANT ? ISO 10328:2016 is suitable for the assessment of the conformity of lower limb prosthetic devices/structures with the strength requirements specified in 4.4 of ISO 22523:2006 (see NOTE 1). Prosthetic ankle-foot devices and foot units on the market, which have demonstrated their compliance with the strength requirements specified in 4.4 of ISO 22523:2006 through submission to the relevant tests of ISO 10328:2006, need not be retested to ISO 22675:2016.
WARNING ? ISO 10328:2016 is not suitable to serve as a guide for the selection of a specific lower limb prosthetic device/structure in the prescription of an individual lower limb prosthesis! Any disregard of this warning can result in a safety risk for amputees.
ISO 10328:2016 specifies procedures for static and cyclic strength tests on lower-limb prostheses (see NOTE 2) which typically produce compound loadings by the application of a single test force. The compound loads in the test sample relate to the peak values of the components of loading which normally occur at different instants during the stance phase of walking.

  • Standard
    153 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IMPORTANT ? ISO 22675:2016 is suitable for the assessment of the conformity of prosthetic ankle-foot devices and foot units with the strength requirements specified in 4.4 of ISO 22523:2006 (see NOTE 1). Prosthetic ankle-foot devices and foot units on the market, which have demonstrated their compliance with the strength requirements specified in 4.4 of ISO 22523:2006 through submission to the relevant tests of ISO 10328:2006, need not be retested to this International Standard.
WARNING ? ISO 22675:2016 is not suitable to serve as a guide for the selection of a specific ankle-foot device or foot unit in the prescription of an individual lower limb prosthesis! Any disregard of this warning can result in a safety risk for amputees.
ISO 22675:2016 primarily specifies a cyclic test procedure for ankle-foot devices and foot units of external lower limb prostheses, distinguished by the potential to realistically simulate those loading conditions of the complete stance phase of walking from heel strike to toe-off that are relevant to the verification of performance requirements such as strength, durability and service life.
This potential is of particular importance for the assessment of the performance of a variety of recent designs of ankle-foot devices and foot units with specific characteristics that will only develop under realistic conditions of loading.
In addition, ISO 22675:2016 specifies a static test procedure for prosthetic ankle-foot devices and foot units, consisting of a static proof test and a static ultimate strength test, distinguished, besides other features, (see NOTE 2) by the potential to generate heel and forefoot forces at lines of action conforming to those occurring at the instants of maximum heel and forefoot loading during the cyclic test.
The loading conditions addressed in the third paragraph are characterized by a loading profile determined by the resultant vector of the vertical and horizontal (A-P) ground reaction forces and by a locomotion profile determined by the tibia angle.
The test loading conditions specified in this International Standard are characterized by standardized formats of these loading and locomotion profiles, to be uniformly applied by the cyclic and static test procedures to each sample of ankle-foot device or foot unit submitted for test.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

ISO 16840-6:2015 specifies apparatus, test methods, and disclosure requirements for generating aging effects in a seat cushion that reproduce those seen in use. It also provides methods of determining changes in the physical and mechanical properties of seat cushions based on their age and use. ISO 16840-6:2015 provides a set of tests that simulate wear and tear, which can be useful to validate warranty claims and to provide information about product, life, and performance limitations associated with product use.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off

ISO 10865-2:2015 applies to wheelchair passenger spaces that are intended for use by passengers with a body mass greater than 22 kg who remain in their wheelchairs when travelling facing forward in accessible transport vehicles designed to transport both standing and sitting passengers on fixed-route service. It assumes that the maximum acceleration imparted to the vehicle during emergency driving manoeuvres will not exceed 1 g in any direction and rarely exceeds 3 g in frontal crashes. For the purposes of this part of ISO 10865, the term wheelchair includes manual and powered wheelchairs, and three and four wheeled scooters. ISO 10865-2:2015 specifies performance requirements and associated test methods, design requirements, requirements for manufacturer instructions and warnings to installers, wheelchair users, and vehicle operators, and requirements for product labelling and disclosure of test information. The provisions of this part of ISO 10865 apply primarily to a complete forward-facing wheelchair passenger space (FF-WPS), but subsets of the provisions can be applied to components and subassemblies sold separately, as appropriate to the specific functions of the components and/or subassemblies they are intended to replace.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off

ISO/TR 16840-9:2015 has been produced to guide users in the performance of the tasks that are directly involved in the clinical use of interface pressure mapping (IPM) or are synergistic with its use in a comprehensive wheelchair seating evaluation. ISO/TR 16840-9:2015 does not cover other aspects of the clinical assessment process (e.g. taking a medical history), nor the prescription or treatment process which might arise from an assessment. These guidelines are not meant to be a substitute for clinical reasoning and judgement within the context of a complete assessment. ISO/TR 16840-9:2015 refers to the state of the art of IPM experiences in a seating scenario. Most of the principles covered can be extrapolated to whole body (in bed) or to foot assessments, for example.

  • Technical report
    18 pages
    English language
    sale 15% off
  • Technical report
    20 pages
    French language
    sale 15% off

ISO/TS 16840-12:2015 specifies apparatus, test methods, and disclosure requirements for characterization of wheelchair seat cushion immersion and envelopment properties using instrumented indenters to characterize the interface pressure of each indenter and the test cushion by measuring the cushioning effects of immersion and envelopment. This part of ISO 16840 can be considered to expand the characterization of products intended to manage tissue integrity (ISO 16840‑2) and provide a standardized indenter for other wheelchair seating tests. It does not provide information specific to cushion performance for a particular individual user. ISO/TS 16840-12:2015 includes a method that is specific to 220 mm and 255 mm indenters. Dimensions and loads are provided for the 380 mm indenter to allow for extension of the methods for bariatric applications.

  • Technical specification
    14 pages
    English language
    sale 15% off
  • Technical specification
    14 pages
    French language
    sale 15% off

ISO 16840-10:2014 specifies requirements and test methods to assess the resistance to ignition by smouldering cigarette equivalent of non-integrated components of a wheelchair intended to protect tissue integrity. The test measures only the resistance to ignition by smouldering cigarette equivalent of the items tested and not the ignitability of the complete wheelchair. It gives an indication, but cannot guarantee, the ignition behaviour of the assembled non-integrated devices of a complete wheelchair. This part of ISO 16840 does not apply to resistance to ignition of structural parts of a wheelchair, nor does it cover postural support devices. This part of ISO 16840 does not cover changes in resistance to ignition as a result of regular washing or use. This part of ISO 16840 allows for the separate testing of removable non-integrated components of a wheelchair which are normally used in the horizontal plane (e.g. a seat cushion) from those normally used in the vertical plane (e.g. a back support). This part of ISO 16840 describes testing an assembly of the composite of materials as used in the removable non-integrated component. The results of this part of ISO 16840 do not give any indication of the resistance to ignition of any of the separate individual materials of the test sample. NOTE 1 The intent of this part of ISO 16840 is primarily to cover removable cushions whose described purpose is that of protecting skin tissue against pressure, shear, and maceration related damage. NOTE 2 The requirements of this part of ISO 16840 have been set at a basic minimal level and are less severe than mandatory requirements in some countries. Where practical, it is advisable that manufacturers use materials with superior resistance to ignition. The manufacturer is required to make the case as to why ISO 7176?16 could not be employed rather than this part of ISO 16840. NOTE 3 Requirements for the control of risks from sources of fire created by electrical and electronic components are included in ISO 7176?14

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

ISO 7176-8:2014 specifies requirements for static, impact, and fatigue strength of wheelchairs including scooters. It specifies the test methods for determining whether the requirements have been met. It also specifies requirements for disclosure of the test results. The test methods can also be used to verify the manufacturers' claims that a product exceeds the minimum requirements of this part of ISO 7176. ISO 7176-8:2014 applies to occupant- and attendant-propelled manual wheelchairs and electrically powered wheelchairs intended to provide indoor and outdoor mobility for people with disabilities. NOTE 1 For the purposes of this part of ISO 7176, "wheelchair(s)" is used as an abbreviation for manual wheelchair(s) or electrically powered wheelchair(s), including scooter(s), to which the requirements and test methods are applied. NOTE 2 Clauses of this part of ISO 7176 will be used as a basis for developing requirements and test methods for wheelchairs not covered by this part of ISO 7176.

  • Standard
    67 pages
    English language
    sale 15% off
  • Standard
    71 pages
    French language
    sale 15% off

ISO 7176-1:2014 specifies test methods for determining the static stability of wheelchairs. It is applicable to manual and electrically powered wheelchairs, including scooters, with a maximum speed not greater than 15 km/h, intended to provide indoor and/or outdoor mobility for one disabled person whose mass is within the range represented by ISO 7176‑11. For active stability-controlled wheelchairs, ISO 7176-1:2014 applies to the device in a stable, parked state. ISO 7176-1:2014 provides a method for the measurement of the tipping angles (either wheelchair tipping angle or anti-tip device tipping angle), but this method is not applicable to wheelchairs with lateral anti-tip devices and does not consider sliding on the ground. ISO 7176-1:2014 also includes requirements for test reports and information disclosure.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off

ISO 7176-22:2014 specifies a set-up procedure to be used as a part of the preparation of adjustable wheelchairs for testing. This procedure takes the manufacturer's instructions into account. ISO 7176-22:2014 is applicable to manual wheelchairs and electric wheelchairs (including scooters) intended to provide indoor and/or outdoor mobility.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off

ISO/TR 13570-2:2014 lists the typical values and recommended limits of the dimensions obtained from measurements taken in accordance with ISO 7176‑5. ISO/TR 13570-2:2014 lists the typical values and recommended limits of the important wheelchair dimensions (ready for occupation and folded or dismantled), space for pivoting or reversing between limiting walls and some dimensions worthwhile to estimate usability of the wheelchair as well as determination of the mass of the wheelchair. It is intended for use of prescribers, clinicians, wheelchair occupants or manufacturers. ISO/TR 13570-2:2014 lists the typical values and recommended limits of the dimensions when the wheelchair is occupied and some operating areas when performing special tasks encountered in every day's life. ISO/TR 13570-2:2014 lists the typical values and recommended limits of the technical dimensions critical to the performance of the wheelchair. ISO/TR 13570-2:2014 applies to manual wheelchairs and electrically powered wheelchairs (including scooters).

  • Technical report
    33 pages
    English language
    sale 15% off
  • Technical report
    37 pages
    French language
    sale 15% off

EN 12183 specifies requirements and test methods for manual wheelchairs intended to carry one person of mass not greater than 250 kg. It also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment. This European Standard does not apply in total to: - wheelchairs intended for special purposes, such as sports, showering or toileting, - manual wheelchairs with handrim-activated power-assisted propulsion, - custom-made wheelchairs, - stand-up wheelchairs, and - manual wheelchairs with add-on power kits used for propulsion.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN 12184 specifies requirements and test methods for electrically powered wheelchairs, including electrically powered scooters with three or more wheels, with a maximum speed not exceeding 15 km/h intended to carry one person of mass not greater than 300 kg. It also specifies requirements and test methods for battery chargers for wheelchairs and scooters. This European Standard does not apply in total to: - electrically powered wheelchairs intended for special purposes, such as sports, showering or toileting, - manual wheelchairs with handrim-activated power-assisted propulsion, - custom-made electrically powered wheelchairs, - electrically powered stand-up wheelchairs, - manual wheelchairs with add-on power kits used for propulsion, and - electrically powered office chairs.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and test methods for manual wheelchairs intended to carry one person of mass not greater than 250 kg.
It also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.
This European Standard does not apply in total to:
-   wheelchairs intended for special purposes, such as sports, showering or toileting,
-   manual wheelchairs with handrim-activated power-assisted propulsion,
-   custom-made wheelchairs,
-   stand-up wheelchairs, and
-   manual wheelchairs with add-on power kits used for propulsion.
NOTE   Requirements for electrically powered wheelchairs are specified in EN 12184.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and test methods for electrically powered wheelchairs, including electrically powered scooters with three or more wheels, with a maximum speed not exceeding 15 km/h intended to carry one person of mass not greater than 300 kg.
It also specifies requirements and test methods for battery chargers for wheelchairs and scooters.
This European Standard does not apply in total to:
-   electrically powered wheelchairs intended for special purposes, such as sports, showering or toileting,
-   manual wheelchairs with handrim-activated power-assisted propulsion,
-   custom-made electrically powered wheelchairs,
-   electrically powered stand-up wheelchairs,
-   manual wheelchairs with add-on power kits used for propulsion and
-   electrically powered office chairs.
NOTE   Requirements for manually propelled wheelchairs are specified in EN 12183.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 16840-3:2014 specifies test methods for the determination of static, impact, and repetitive load strengths as well as disclosure requirements for postural support devices (PSD) with associated attachment hardware intended for use with an undefined wheelchair.

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off

ISO/TS 16840-11:2014 specifies a method for determining the dissipation characteristics of simulated perspiration exposure on wheelchair seat cushions. ISO/TS 16840-11:2014 is applicable to wheelchair seat cushions that include a cushion cover.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    French language
    sale 15% off

ISO 7176-25:2013 specifies requirements and test methods for batteries and battery chargers intended for use with electrically powered wheelchairs. It is applicable to lead acid batteries and chargers intended for use with them. Requirements for chargers are applicable to those with a rated input voltage not greater than 250 V a.c. and a nominal output voltage not greater than 36 V.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off

ISO 7176-3:2012 specifies test methods for the measurement of the effectiveness of brakes of manual wheelchairs and electrically powered wheelchairs, including scooters, intended to carry one person, with a maximum speed not exceeding 15 km/h. It also specifies disclosure requirements for the manufacturer.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

ISO 7176-11:2012 specifies requirements for test dummies of any mass greater than or equal to 25 kg, to be used in the evaluation of wheelchairs. ISO 7176-11:2012 provides formulae that specify the location of the overall centre of mass of test dummies, the masses of the segments that comprise the test dummies and the locations of pivots that connect the segments. It also specifies the characteristics of loading pads that support the segments. ISO 7176-11:2012 is intended to enable the construction of test dummies that will produce comparable results for stability, performance and durability testing of manual wheelchairs and electrically powered wheelchairs, including scooters. ISO 7176-11:2012 also includes informative tables of mass and locations of centre of mass, which are derived from the formulae, corresponding to example test dummy masses up to 300 kg in 25 kg increments.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off

ISO 7176-16:2012 specifies requirements and test methods to assess the resistance to ignition by match flame equivalent of all postural support devices that are supplied to be part of a wheelchair or its seating system. ISO 7176-16:2012 only determines the resistance to ignition of the devices tested and not the ignitability of the complete wheelchair. ISO 7176-16:2012 allows for the separate testing of inferior/superior supports (e.g. arm supports), which are usually used in the horizontal plane, and anterior/posterior/lateral/medial supports (e.g. thoracic harnesses, calf panels), which are usually used in the vertical plane.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

ISO 7176-28:2012 is applicable to stair-climbing chairs and stair-climbing wheelchair carriers where the stair-climbing device climbs backwards up the stairs, with the occupant facing downstairs, and climbs forwards down the stairs with the occupant also facing downstairs. ISO 7176-28:2012 is applicable to stair-climbing devices which are intended for the transport of adults and those intended for the transport of children. It is not applicable to stair-climbing devices which are intended to be operated by children as operating occupants or assistants. ISO 7176-28:2012 specifies requirements and test methods for electrically powered stair-climbing devices. It is not applicable to manually powered stair-climbing devices. ISO 7176-28:2012 specifies tests to demonstrate the stair-climbing device's ability to perform safely on stairs with a pitch of 35°, or higher if declared by the manufacturer. It also includes ergonomic, labelling and disclosure requirements.

  • Standard
    99 pages
    English language
    sale 15% off
  • Standard
    105 pages
    French language
    sale 15% off

This part of ISO 10542 specifies design and performance requirements and associated test methods for wheelchair tiedown and occupant-restraint systems (WTORS), as well as requirements for product marking and labelling and manufacturers' instructions and warnings to installers and consumers. It is applicable to all WTORS that use belt-type occupant restraints that are intended for occupied wheelchairs used as forward-facing seats by passengers and drivers of motor vehicles. This part of ISO 10542 is applicable to WTORS intended for use with all types of manual and powered wheelchairs, including three- and four-wheeled scooters, used by children and adults with a body mass equal to or greater than 22 kg. It is applicable also to WTORS designed for limited use with a particular make or model of wheelchair. This part of ISO 10542 is applicable primarily to complete WTORS, but portions can also be applied to components and subassemblies sold separately and for replacement parts.

  • Standard
    68 pages
    English language
    sale 15% off
  • Standard
    70 pages
    French language
    sale 15% off

ISO 10865-1:2012 is applicable to wheelchair passenger spaces (RF‑WPSs) intended for use by rearward-facing wheelchair-seated occupants, with a body mass greater than 22 kg, when travelling in accessible transport vehicles. It is applicable to systems for use in vehicles used mainly on fixed route services when operated under normal and emergency driving conditions, where passengers are allowed to travel both sitting and standing. ISO 10865-1:2012 specifies design and performance requirements and associated test methods, requirements for manufacturer instructions and warnings to installers and users, requirements for product labelling and disclosure of test information. The primary purpose of ISO 10865-1:2012 is to limit those movements of a rearward-facing wheelchair, including scooters with three or more wheels, that might result in hazardous contact with the vehicle interior or injury to other passengers.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off

ISO 24415-2:2011 specifies requirements and test methods for the durability of tips for crutches. ISO 24415-2:2011 is not applicable to tips manufactured for special purposes e.g. walking on ice and snow. The requirements and test method are based on tips being used with an ordinary gait on dry and flat walking surfaces.

  • Standard
    5 pages
    English language
    sale 15% off

1.1 This European standard deals with safety requirements for construction, manufacturing, installation and maintenance of electrically operated vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility :
- travelling vertically between fixed levels along a guided path within 15 degrees max. of the vertical;
- intended for use is by persons with or without a wheelchair ;
- supported or sustained by wire rope, chain, rack and pinion, hydraulic jack (direct or indirect), screw and nut, guided chain, friction/traction, or scissors mechanism ;
- with enclosed lift-ways ;
- with rated speed not exceeding 0,15 m/s even after installation ;
- with hold-to-run control.
1.2 This standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.3 This European standard does not specify the additional requirements for :
- operation in severe conditions (e.g. extreme climates, strong magnetic fields) ;
- lightning protection ;
- operation subject to special rules (e.g. potentially explosive atmospheres) ;
- handling of materials, the nature of which could lead to dangerous situations ;
- hazards occurring during manufacture ;
- earthquakes, flooding ;
- fire fighting, evacuation during a fire ;
- noise and vibrations ;
- concrete, hardcore, timber or other foundation or building arrangement ;
- the design of anchorage bolts to the supporting structure ;
- type C wheelchairs as defined in EN 12183 and/or EN 12184.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   intended for use by persons with or without a wheelchair;
-   supported or sustained by rack and pinion, wire ropes, chains, screw and nut, friction/traction between wheels and the rail, guided chain, scissors mechanism or hydraulic jack (direct or indirect);
-   with enclosed liftways;
-   with a speed not greater than 0,15 m/s;
-   with platforms where the carrier is not completely enclosed
1.2   This standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
1.3   This European Standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials, the nature of which could lead to dangerous situations;
-   vertical lifting platforms whose primary function is the transportation of goods;
-   vertical lifting platforms whose carriers are completely enclosed;
-   vertical lifting platforms prone to vandalism;
-   hazards occurring during manufacture;
-   earthquakes, flooding;
-   fire fighting, evacuation and behaviour during a fire;
-   noise and vibrations;
-   the design of concrete, hardcore, timber or other foundation or building arrangement;
-   the design of anchorage bolts to the supporting structure;
-   type C wheelchairs as defined in prEN 12183 and/or prEN 12184.
(....)

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 7176‑9:2009 specifies requirements and test methods to determine the effects of rain, dust, condensation and the effects of changes of temperature on the basic functioning of electrically powered wheelchairs, including scooters, intended to carry one person, with a maximum speed not exceeding 15 km/h. ISO 7176‑9:2009 does not include requirements for resistance to corrosion.

  • Standard
    10 pages
    English language
    sale 15% off

This part of ISO 24415 specifies requirements and test methods for the friction between the tips for assistive products for walking and the walking surface. This part of ISO 24415 is not applicable to tips manufactured for special purposes. The requirements and test method are based on a usage of tips for ordinary gait on the dry and flat walking surface.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 24415-1:2009 specifies requirements and test methods for the friction between the tips for assistive products for walking and the walking surface. The requirements and test method are based on a usage of tips for ordinary gait on the dry and flat walking surface.
ISO 24415-1:2009 is not applicable to tips manufactured for special purposes.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 24415-1:2009 specifies requirements and test methods for the friction between the tips for assistive products for walking and the walking surface. The requirements and test method are based on a usage of tips for ordinary gait on the dry and flat walking surface. ISO 24415-1:2009 is not applicable to tips manufactured for special purposes.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

ISO 7176-21:2009 specifies requirements and test methods for electromagnetic emissions and for electromagnetic immunity of electrically powered wheelchairs and scooters with a maximum speed of not more than 15 km/h intended for indoor and/or outdoor use by people with disabilities. It is also applicable to manual wheelchairs with an add-on power kit. It is not applicable to vehicles designed to carry more than one person. ISO 7176-21:2009 also specifies requirements and test methods for the electromagnetic compatibility of battery chargers intended for use with electrically powered wheelchairs and scooters.

  • Standard
    20 pages
    English language
    sale 15% off

ISO 16840-4:2009 specifies test methods and requirements for design and performance, for instructions and warnings and for product marking and labelling of seating systems intended to be used as a forward-facing seat in a motor vehicle when fitted to a manual or powered wheelchair. It evaluates the frontal crashworthiness performance of complete seating systems for occupancy by adults or children of mass equal to or greater than 22 kg. ISO 16840-4:2009 only applies to complete wheelchair seating systems including attachment hardware, designed to be used with a wheelchair base tested as part of a wheelchair system that conforms to ISO 7176-19 performance requirements and that has securement points for use with four-point, strap-type tiedowns. ISO 16840-4:2009 applies to seating systems designed to be used with occupant restraints that anchor either to the vehicle, the tiedown system, the seating system or the wheelchair base.

  • Standard
    40 pages
    English language
    sale 15% off

ISO 7176-10:2008 specifies test methods for determining the ability to climb and descend obstacles of electrically powered wheelchairs, including scooters, intended to carry one person, with a maximum nominal speed not exceeding 15 km/h.

  • Standard
    6 pages
    English language
    sale 15% off

ISO 7176-4:2008 specifies methods for determining theoretical distance range of electrically powered wheelchairs, including scooters, using measurements of energy consumed while driving and the nominal energy capacity of the wheelchair's battery set. It is applicable to electrically powered wheelchairs with a maximum nominal speed no greater than 15 km/h, intended to provide indoor and/or outdoor mobility for one disabled person whose mass is within the range represented by ISO 7176-11. ISO 7176-4:2008 also includes requirements for test reports and information disclosure.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

ISO 7176-19:2008 applies to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 22 kg. ISO 7176-19:2008 specifies wheelchair design requirements, performance requirements and associated test methods, and requirements for wheelchair labelling, presale literature, user instructions and user warnings. It applies to complete wheelchairs, including a base frame and seating system, as well as to wheelchairs equipped with add-on adaptive components designed to facilitate compliance with one or more of the requirements.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    48 pages
    French language
    sale 15% off

ISO 7176-5:2007 specifies methods for the determination of wheelchair dimensions and mass. This includes specific methods for the determination of outside dimensions when the wheelchair is occupied by a reference occupant and the required manoeuvring space needed for wheelchair manoeuvres commonly carried out in daily life. ISO 7176-5:2007 specifies requirements for the disclosure of the dimensions and masses and contains five informative annexes. Annex A specifies methods for the determination of technical dimensions that can be important to the performance of the wheelchair. Annex B provides detailed information about pivot width and reversing width. Annex C provides detailed information about the turning diameter. Annex D provides details on determining the wheelchair longitudinal axis and wheelchair centre-point. Annex E provides technical guidelines and interpretation for many of the measurements specified to facilitate improved understanding, design and construction of wheelchairs. ISO 7176-5:2007 is applicable to manual wheelchairs and electrically powered wheelchairs (including scooters).

  • Standard
    79 pages
    English language
    sale 15% off