Intelligent transport systems - ITS spatial data - Data exchange on changes in road attributes

This document defines the content specification for the exchange of road-related spatial data, and especially updates thereof. Based on the content specification, this document defines also a physical exchange format (structure and encoding) for the actual data exchange. In addition, it defines web services that are needed to make the coded data on updates available. Exchange of dynamic information is not in the scope of this document.
Although the focus of this document is on providing information on updates, the technology described in this document in principle also enables the exchange of full datasets, either concerning the whole road network in a coverage area, including all geometry and all attributes, or a subset, concerning for instance all instances of one or more specific attributes.
NOTE   This specification does not support the provision of updates concerning geometry. The provision of geometry associated with attribution change is supported, in the context of providing the location of attribute change.

Intelligente Verkehrssysteme - Räumliche ITS-Daten - Datenaustausch zu Änderungen von Straßenattributen

Systèmes de transport intelligents - Données spatiales STI - Échange de données sur les modifications d'attributs routiers

Inteligentni transportni sistemi - Prostorski podatki ITS - Izmenjava podatkov o spremembah atributov cest

Ta dokument določa specifikacijo vsebine za izmenjavo prostorskih podatkov, povezanih s cestami, in še zlasti njihove posodobitve. Na podlagi specifikacije vsebine ta dokument določa tudi fizični format izmenjave (strukturo in kodiranje) za dejansko izmenjavo podatkov. Poleg tega določa spletne storitve, ki so potrebne za razpoložljivost kodiranih podatkov o posodobitvah. Izmenjava dinamičnih informacij ne spada na področje uporabe tega dokumenta.
Čeprav je bistvo tega dokumenta zagotavljanje informacij o posodobitvah, tehnologija, ki je opisana v tem dokumentu, načeloma omogoča tudi izmenjavo celotnih naborov podatkov v povezavi s celotnim cestnim omrežjem na območju pokritosti, vključno z vso geometrijo in atributi, ali podskupino, na primer za vse primere enega ali več posebnih atributov.
OPOMBA: Ta specifikacija ne podpira zagotavljanja posodobitev o geometriji. Zagotavljanje geometrije v povezavi s spremembo atributa je podprto v okviru zagotavljanja lokacije spremembe atributov.

General Information

Status
Published
Publication Date
11-Dec-2018
Current Stage

Buy Standard

Technical specification
TS CEN/TS 17268:2019
English language
171 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2019
Inteligentni transportni sistemi - Prostorski podatki ITS - Izmenjava podatkov o
spremembah atributov cest
Intelligent transport systems - ITS spatial data - Data exchange on changes in road
attributes
Intelligente Verkehrssysteme - Räumliche ITS-Daten - Datenaustausch zu Änderungen
von Straßenattributen
Systèmes de transport intelligents - Données spatiales STI - Échange de données sur
les modifications d'attributs routiers
Ta slovenski standard je istoveten z: CEN/TS 17268:2018
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TS 17268
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
December 2018
TECHNISCHE SPEZIFIKATION
ICS 35.240.60
English Version
Intelligent transport systems - ITS spatial data - Data
exchange on changes in road attributes
Systèmes de transport intelligents - Données spatiales Intelligente Verkehrssysteme - Räumliche ITS-Daten -
STI - Échange de données sur les modifications Datenaustausch zu Änderungen von Straßenattributen
d'attributs routiers
This Technical Specification (CEN/TS) was approved by CEN on 29 July 2018 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17268:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviated terms . 9
5 Conformance . 9
6 Data content specification . 10
6.1 Introduction . 10
6.2 Package overview . 10
6.3 Package Road features . 12
6.3.1 Overview . 12
6.3.2 Class definitions . 14
6.3.3 Sub package Conditions . 20
6.4 Package location referencing . 43
6.5 Package Updates . 56
6.5.1 Overview . 56
6.5.2 Class definitions . 57
6.6 Package Metadata . 57
6.7 Package Feedback . 59
6.8 Package Data set . 65
7 Physical exchange format - structure and encoding . 69
7.1 Introduction . 69
7.2 GML schemas for TN-ITS . 70
8 Service specification . 72
8.1 Introduction . 72
8.1.1 Context . 72
8.1.2 Discovery service scope . 72
8.1.3 Download service scope . 73
8.1.4 Download service decisions . 73
8.1.5 Approach 1: Server defined update intervals . 73
8.1.6 Approach 2: Client defined update intervals . 74
8.1.7 Server/Client defined update intervals - conclusion . 74
8.1.8 Versioning scheme . 75
8.2 Interface specification . 75
8.2.1 Context . 75
8.2.2 Server-side interfaces . 75
8.2.3 Server-side classes and datatypes . 77
8.2.4 Server-side responsibilities . 78
8.3 Interface implementation specification . 81
Annex A (normative) Enumerations and CodeLists . 82
A.1 Explanation of Structure . 82
A.2 Enumerations . 82
A.3 Codelists . 86
Annex B (normative) TN-ITS XSD schemas . 124
B.1 General . 124
B.2 XML schemas . 124
B.2.1 TN-ITS.xsd . 124
B.2.2 Dataset.xsd . 124
B.2.3 RoadFeatures.xsd . 126
B.2.4 Conditions.xsd. 129
B.2.5 LocationReferencing.xsd . 137
B.2.6 Update.xsd . 142
B.2.7 Feedback.xsd . 143
B.2.8 Metadata.xsd . 146
B.2.9 OpenLR.xsd . 146
B.3 Linear referencing methods . 159
Annex C (informative) Examples of GML files . 160
Annex D (informative) Alignment with EC Delegated Regulation 2015/962 and INSPIRE. 161
D.1 Context . 161
D.2 Alignment with the Delegated Regulation 2015/962 supplementing the European ITS
Directive (2010/40/EU) . 161
D.3 Alignment with INSPIRE Directive (2007/2/EU) and INSPIRE Implementing Rules . 164
D.3.1 Connection to INSPIRE Road Network data sets . 164
D.3.2 Use of INSPIRE Administrative Units . 164
D.3.3 Alignment in regard to INSPIRE Metadata Implementing Rules . 164
Annex E (informative) Link to EN ISO 19148 . 168
Bibliography . 170

European foreword
This document (CEN/TS 17268:2018) has been prepared by Technical Committee CEN/TC 278
“Intelligent transport systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom
Introduction
ITS digital maps (digital maps for ITS applications) were initially d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.