Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C

This standard specifies the characteristics of bihexagonal self-locking nuts, with counterbore, in heat resisting steel, passivated.
Classification: 1 100 MPa / 650 °C

Luft- und Raumfahrt - Flache Zwölfkantmuttern, selbstsichernd, mit zylindrischer Aussenkung, aus hochwarmfestem Stahl, passiviert - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C

Diese Norm legt die Merkmale von selbstsichernden Zwölfkantmuttern mit zylindrischer Aussenkung aus hochwarmfestem Stahl, passiviert fest.
Klasse: 1 100 MPa / 650 °C.

Série aérospatiale - Écrous bihexagonaux, à freinage interne, avec chambrage, en acier résistant à chaud, passivés - Classification : 1 100 MPa (à température ambiante) / 650 °C

Aeronavtika - Matice, biheksagonalne, samozapiralne, z izvrtino za valjaste vijake, iz toplotnoodpornega jekla, pasivirane - Klasifikacija: 1100 MPa (pri temperaturi okolice)/650 °C

Ta standard določa značilnosti samozapiralnih šestrobih matic z izvrtino za valjaste vijake iz toplotnoodpornega jekla, pasivirane. Klasifikacija: 1 100 MPa/650 °C.

General Information

Status
Published
Publication Date
12-Oct-2010
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
13-Oct-2010
Completion Date
13-Oct-2010

Buy Standard

Standard
EN 3843:2011
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 3843:2011
01-maj-2011

Aeronavtika - Matice, biheksagonalne, samozapiralne, z izvrtino za valjaste vijake,

iz toplotnoodpornega jekla, pasivirane - Klasifikacija: 1100 MPa (pri temperaturi

okolice)/650 °C

Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting

steel, passivated - Classification: 1100 MPa (at ambient temperature)/650 °C
Luft- und Raumfahrt - Flache Zwölfkantmuttern, selbstsichernd, mit zylindrischer
Aussenkung, aus hochwarmfestem Stahl, passiviert - Klasse: 1100 MPa (bei
Raumtemperatur)/650 °C

Série aérospatiale - Écrous bihexagonaux, à freinage interne, avec chambrage, en acier

résistant à chaud, passivés - Classification: 1100 MPa (à température ambiante)/650 °C

Ta slovenski standard je istoveten z: EN 3843:2010
ICS:
49.030.30 Matice Nuts
SIST EN 3843:2011 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3843:2011
---------------------- Page: 2 ----------------------
SIST EN 3843:2011
EUROPEAN STANDARD
EN 3843
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 49.030.30
English Version
Aerospace series - Nuts, bihexagonal, self-locking, with
counterbore, in heat resisting steel, passivated - Classification: 1
100 MPa (at ambient temperature) / 650 °C

Série aérospatiale - Écrous bihexagonaux, à freinage Luft- und Raumfahrt - Flache Zwölfkantmuttern,

interne, avec chambrage, en acier résistant à chaud, selbstsichernd, mit zylindrischer Aussenkung, aus

passivés - Classification : 1 100 MPa (à température hochwarmfestem Stahl, passiviert - Klasse: 1 100 MPa (bei

ambiante) / 650 °C Raumtemperatur) / 650 °C
This European Standard was approved by CEN on 30 July 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3843:2010: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3843:2011
EN 3843:2010 (E)
Contents Page

Foreword ..............................................................................................................................................................3

1 Scope ......................................................................................................................................................4

2 Normative references ............................................................................................................................4

3 Required characteristics .......................................................................................................................4

4 Designation ............................................................................................................................................6

5 Marking ...................................................................................................................................................6

6 Technical specification .........................................................................................................................6

---------------------- Page: 4 ----------------------
SIST EN 3843:2011
EN 3843:2010 (E)
Foreword

This document (EN 3843:2010) has been prepared by the Aerospace and Defence Industries Association of

Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of ASD,

prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the

latest by April 2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. C
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.