Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2018)

This document describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific or specific to its oxidation state.
This method describes the determination of chromium by atomic absorption spectrometry and is applicable to leathers which are expected to have chromic oxide contents in excess of 5 mg/kg. Two techniques for the preparation of the solution to be analysed are included. In the case of disputes, the wet oxidation technique is to be used.

Leder - Chemische Bestimmung des Chromoxidgehalts - Teil 3: Bestimmung durch Atomabsorptionsspektrometrie (ISO 5398-3:2018)

Dieses Dokument beschreibt ein Verfahren zur Bestimmung von Chrom in einer aus Leder erhaltenen wässrigen Lösung. Im vorliegenden Fall handelt es sich um eine Analyse des Gesamtchromgehaltes in Leder, die nicht verbindungsspezifisch oder spezifisch für die Oxidationsstufe ist.
Dieses Verfahren beschreibt die Bestimmung von Chrom durch Atomabsorptionsspektrometrie und ist vorgesehen für Leder, bei denen Chromoxidgehalte von mehr als 5 mg/kg vermutet werden. Enthalten sind zwei Verfahren zur Vorbereitung der zu analysierenden Lösung. Im Streitfall ist das Nassoxidations-verfahren anzuwenden.

Cuir - Dosage chimique de l'oxyde de chrome - Partie 3: Quantification par spectrométrie d'absorption atomique (ISO 5398-3:2018)

Le présent document décrit une méthode permettant de doser le chrome dans une solution aqueuse obtenue à partir de cuir. C'est une analyse du chrome total dans le cuir; elle est non spécifique du composé chromé ou de l'état d'oxydation du chrome.
La présente méthode indique comment doser le chrome par spectrométrie d'absorption atomique et elle s'applique aux cuirs susceptibles de contenir de l'oxyde de chrome dans des proportions supérieures à 5 mg/kg. Deux techniques de préparation de la solution à analyser sont décrites. En cas de litige, c'est la méthode d'oxydation en milieu humide qui doit être utilisée.

Usnje - Kemijsko določevanje kromovega oksida - 3. del: Kvantitativno določevanje z atomsko absorpcijsko spektrometrijo (ISO 5398-3:2018)

Ta dokument opisuje metodo za določevanje kroma v vodni raztopini, pridobljeni iz usnja. To je analiza skupne vsebnosti kroma v usnju, pri čemer ne obravnava določene spojine ali določenega oksidacijskega stanja kroma.
Ta metoda opisuje določevanje kroma z atomsko absorpcijsko spektrometrijo in se uporablja za usnje, za katerega se pričakuje, da vsebuje več kot 5 mg/kg kromovega oksida. Vključeni sta dve tehniki priprave raztopine, namenjene za analizo. V primeru spora se uporablja tehnika mokre oksidacije.

General Information

Status
Published
Publication Date
17-Jul-2018
Withdrawal Date
30-Jan-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Jul-2018
Completion Date
18-Jul-2018

Relations

Buy Standard

Standard
EN ISO 5398-3:2018
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 5398-3:2017
German language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5398-3:2018
01-oktober-2018
1DGRPHãþD
SIST EN ISO 5398-3:2009
8VQMH.HPLMVNRGRORþHYDQMHNURPRYHJDRNVLGDGHO.YDQWLWDWLYQR
GRORþHYDQMH]DWRPVNRDEVRUSFLMVNRVSHNWURPHWULMR ,62
Leather - Chemical determination of chromic oxide content - Part 3: Quantification by
atomic absorption spectrometry (ISO 5398-3:2018)
Leder - Chemische Bestimmung des Chromoxidgehalts - Teil 3: Bestimmung durch
Atomabsorptionsspektrometrie (ISO 5398-3:2018)
Cuir - Dosage chimique de l'oxyde de chrome - Partie 3: Quantification par spectrométrie
d'absorption atomique (ISO 5398-3:2018)
Ta slovenski standard je istoveten z: EN ISO 5398-3:2018
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 5398-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5398-3:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 5398-3:2018


EN ISO 5398-3
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2018
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 5398-3:2007
English Version

Leather - Chemical determination of chromic oxide content
- Part 3: Quantification by atomic absorption spectrometry
(ISO 5398-3:2018)
Cuir - Dosage chimique de l'oxyde de chrome - Partie 3: Leder - Chemische Bestimmung des Chromoxidgehalts
Quantification par spectrométrie d'absorption - Teil 3: Bestimmung durch
atomique (ISO 5398-3:2018) Atomabsorptionsspektrometrie (ISO 5398-3:2018)
This European Standard was approved by CEN on 8 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5398-3:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5398-3:2018
EN ISO 5398-3:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 5398-3:2018
EN ISO 5398-3:2018 (E)
European foreword
This document (EN ISO 5398-3:2018) has been prepared by Technical Committee IULTCS
"International Union of Leather Technologists and Chemists Societies" in collaboration with Technical
Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5398-3:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5398-3:2018 has been approved by CEN as EN ISO 5398-3:2018 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 5398-3:2018
...

SLOVENSKI STANDARD
oSIST prEN ISO 5398-3:2017
01-oktober-2017
8VQMH.HPLMVNRGRORþHYDQMHNURPRYHJDRNVLGDGHO.YDQWLWDWLYQR
GRORþHYDQMH]DWRPVNRDEVRUSFLMVNRVSHNWURPHWULMR ,62',6
Leather - Chemical determination of chromic oxide content - Part 3: Quantification by
atomic absorption spectrometry (ISO/DIS 5398-3:2017)
Leder - Chemische Bestimmung des Chromoxidgehalts - Teil 3: Bestimmung durch
Atomabsorptionsspektrometrie (ISO/DIS 5398-3:2017)
Cuir - Dosage chimique de l'oxyde de chrome - Partie 3: Quantification par spectrométrie
d'absorption atomique (ISO/DIS 5398-3:2017)
Ta slovenski standard je istoveten z: prEN ISO 5398-3
ICS:
59.140.30 Usnje in krzno Leather and furs
oSIST prEN ISO 5398-3:2017 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5398-3:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5398-3:2017


ENTWURF
EUROPÄISCHE NORM
prEN ISO 5398-3
EUROPEAN STANDARD

NORME EUROPÉENNE

Juli 2017
ICS 59.140.30 Vorgesehen als Ersatz für EN ISO 5398-3:2007
Deutsche Fassung

Leder - Chemische Bestimmung des Chromoxidgehalts - Teil
3: Bestimmung durch Atomabsorptionsspektrometrie
(ISO/DIS 5398-3:2017)
Leather - Chemical determination of chromic oxide Cuir - Dosage chimique de l'oxyde de chrome - Partie 3:
content - Part 3: Quantification by atomic absorption Quantification par spectrométrie d'absorption
spectrometry (ISO/DIS 5398-3:2017) atomique (ISO/DIS 5398-3:2017)
Dieser Europäische Norm-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen
Komitee CEN/TC 289 erstellt.

Wenn aus diesem Norm-Entwurf eine Europäische Norm wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu
erfüllen, in der die Bedingungen festgelegt sind, unter denen dieser Europäischen Norm ohne jede Änderung der Status einer
nationalen Norm zu geben ist.

Dieser Europäische Norm-Entwurf wurde von CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine
Fassung in einer anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine
Landessprache gemacht und dem CEN-CENELEC-Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die
offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen
jugoslawischen Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland,
Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz,
Serbien, der Slowakei, Slowenien, Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und
Zypern.

Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen,
mitzuteilen und unterstützende Dokumentationen zur Verfügung zu stellen.

Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.


EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2017 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. prEN ISO 5398-3:2017 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5398-3:2017
prEN ISO 5398-3:2017 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Vorwort . 4
Einleitung . 5
1 Anwendungsbereich . 6
2 Normative Verweisungen . 6
3 Begriffe . 6
4 Kurzbeschreibung .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.