EN ISO 3908:2009
(Main)Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009)
Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009)
ISO 3908:2009 specifies a gravimetric method for the determination of the mass fraction of insoluble (free) carbon in carbides and hardmetals.
This method is applicable to
carbides of hafnium, molybdenum, niobium, tantalum, titanium, vanadium, tungsten and zirconium,
mixtures of these carbides and binder metals, free of lubricant, and
all grades of presintered or sintered hardmetals, produced from these carbides,
having a mass fraction of insoluble carbon between 0,02 % and 0,5 %.
Hartmetalle - Bestimmung des unlöslichen (freien) Kohlenstoff-Gehaltes - Gravimetrisches Verfahren (ISO 3908:2009)
Diese Internationale Norm legt ein gravimetrisches Verfahren zur Bestimmung des unlöslichen (freien) Kohlenstoffgehaltes (Massenanteiles) von Carbiden und Hartmetallen fest.
Dieses Verfahren ist anwendbar bei
- Hafnium-, Molybdän-, Niob-, Tantal-, Titan-, Vanadium-, Wolfram- und Zirkoncarbiden,
- Gemischen aus diesen Carbiden und Bindemetallen, frei von Bindemitteln, und
- allen Arten vorgesinterter oder gesinterter Hartmetalle, die aus diesen Carbiden erzeugt wurden,
mit einem Gehalt an unlöslichem Kohlenstoff zwischen 0,02 % (Massenanteil) und 0,5 % (Massenanteil).
Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique (ISO 3908:2009)
L'ISO 3908:2009 spécifie une méthode gravimétrique de dosage du carbone insoluble (libre) [fraction massique de carbone insoluble (libre)] dans les carbures et les métaux-durs.
Elle est applicable aux
― carbures de hafnium, molybdène, niobium, tantale, titane, vanadium, tungstène et zirconium,
― mélanges de ces carbures et de métaux liants non lubrifiés,
― métaux-durs de toutes nuances, préfrittés ou frittés, produits de ces carbures,
dont la fraction massique de carbone insoluble est comprise entre 0,02 % et 0,5 %.
Trdine - Določevanje netopnega (prostega) ogljika - Gravimetrijska metoda (ISO 3908:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2009
1DGRPHãþD
SIST EN 23908:2000
7UGLQH'RORþHYDQMHQHWRSQHJD SURVWHJD RJOMLND*UDYLPHWULMVNDPHWRGD ,62
Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO
3908:2009)
Hartmetalle - Bestimmung des unlöslichen (freien) Kohlnestoffgehaltes - Gravimetrisches
Verfahren (ISO 3908:2009)
Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique (ISO
3908:2009)
Ta slovenski standard je istoveten z: EN ISO 3908:2009
ICS:
77.160 Metalurgija prahov Powder metallurgy
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 3908
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2009
ICS 77.160 Supersedes EN 23908:1993
English Version
Hardmetals - Determination of insoluble (free) carbon -
Gravimetric method (ISO 3908:2009)
Métaux-durs - Dosage du carbone insoluble (libre) - Hartmetalle - Bestimmung des unlöslichen (freien)
Méthode gravimétrique (ISO 3908:2009) Kohlenstoffgehaltes - Gravimetrisches Verfahren (ISO
3908:2009)
This European Standard was approved by CEN on 29 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3908:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 3908:2009) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the
latest by April 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 23908:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3908:2009 has been approved by CEN as a EN ISO 3908:2009 without any modification.
INTERNATIONAL ISO
STANDARD 3908
Third edition
2009-10-01
Hardmetals — Determination of insoluble
(free) carbon — Gravimetric method
Métaux-durs — Dosage du carbone insoluble (libre) — Méthode
gravimétrique
Reference number
ISO 3908:2009(E)
©
ISO 2009
ISO 3908:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 3908:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of ele
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.