FprEN 13197

Road marking materials - Wear simulator Turntable

This document specifies the requirements for wear simulator test for road marking materials intended for use in both permanent and temporary road markings including those with increased retroreflection under wet and rain conditions, without road studs.
It gives description for the equipment and for test plate’s characteristics; it also gives description for the test method involving road marking materials application, test conditions during wear test, parameters to be measured, frequency of the measurements and expression of the results as a test report.
This document gives also the requirements to be followed when the test is to be used for CE marking purposes.

Straßenmarkierungsmaterialien - Verschleißsimulator

Diese Europäische Norm legt die Anforderungen an Verschleißsimulator-Prüfungen für Straßenmarkierungs¬materialien fest, die sowohl für die Verwendung als ständige als auch vorübergehende Straßenmarkierungen vorgesehen sind, einschließlich solcher mit verbesserter Retroreflexion bei Nässe und Regen, nicht jedoch für Markierungsknöpfe.
Sie enthält eine Beschreibung der Einrichtung und der Prüfkörper-Merkmale; sie beschreibt außerdem das Prüfverfahren mittels Applikation der Straßenmarkierungsmaterialien, die Prüfbedingungen während der Verschleißprüfung, die zu messenden Parameter, die Messintervalle und die Angabe der Ergebnisse als Prüf¬bericht.
Diese Europäische Norm legt außerdem die zu befolgenden Anforderungen fest, wenn die Prüfung zur Anbringung der CE Kennzeichnung dient.

Produits de marquage routier - Simulateurs d'usure - Table tournante

Materiali za označevanje vozišča - Preskus trajnosti z vrtljivo ploščo

General Information

• Status: Not Published
• Publication Date: 14-Mar-2010
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 226 - Road equipment
• Drafting Committee: CEN/TC 226/WG 2 - Horizontal road signs
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Start Date: 09-Apr-2010
• Completion Date: 09-Apr-2010
• Ref Project: oSIST prEN 13197:2009 - Road marking materials - Wear simulator Turntable

Relations

• Revises: EN 13197:2001 - Road marking materials - Wear simulators
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13197:2009
01-februar-2009
0DWHULDOL]DR]QDþHYDQMHYR]LãþD3UHVNXVWUDMQRVWL]YUWOMLYRSORãþR
Road marking materials - Wear simulator Turntable
Straßenmarkierungsmaterialien - Verschleißsimulator
Produits de marquage routier - Simulateurs d'usure
Ta slovenski standard je istoveten z: prEN 13197
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13197:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13197:2009

---------------------- Page: 2 ----------------------
oSIST prEN 13197:2009
EUROPEAN STANDARD
DRAFT
prEN 13197
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 93.080.20 Will supersede EN 13197:2001
English Version
Road marking materials - Wear simulator Turntable
Produits de marquage routier - Simulateur d'usure - Table Straßenmarkierungsmaterialien - Verschleißsimulator
tournante
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13197:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13197:2009
prEN 13197:2008 (E)
Contents
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Wear simulator facility .5
5 Test plates .7
6 Sampling.8
7 Preparation of samples (application on the test plates).8
8 Test operation .10
9 Test reports for a road marking system.14
Annex A (normative) Determination of no pickup-time in connection with wear simulator test .15
Annex B (informative) Example of a separate record of application proceedings.16
Annex C (informative) Determination of layer thickness.17
Annex D (informative) Determination of the quantity of drop-on materials( consumption ).19
Annex E Annex E (informative) Examples of test reports.
...