EN ISO 10438-1:2003

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Result of the splitting of WI 00012022 (CC/990921)

Erdöl-, petrochemische und Ergasindustrie - Schmieröl-, Sperröl und Regelölversorgungsanlagen und Hilfsanlagen -Teil 1: Allgemeine Anforderungen (ISO 10438-1:2003)

Industries du pétrole, de la pétrochimie et du gaz naturel - Systèmes de lubrification, systèmes d'étanchéité, systèmes d'huile de régulation et leurs auxiliaires - Partie 1: Exigences générales (ISO 10438-1:2003)

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2003
• Withdrawal Date: 14-Dec-2007
• ICS: 75.180.20 - Processing equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2007
• Due Date: 15-Dec-2007
• Completion Date: 15-Dec-2007
• Ref Project: SIST EN ISO 10438-1:2004 - Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003)

Relations

• Replaced By: EN ISO 10438-1:2007 - Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing
and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-
1:2003)
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and
control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003)
Erdöl-, petrochemische und Ergasindustrie - Schmieröl-, Sperröl und
Regelölversorgungsanlagen und Hilfsanlagen -Teil 1: Allgemeine Anforderungen (ISO
10438-1:2003)
Industries du pétrole, de la pétrochimie et du gaz naturel - Systemes de lubrification,
systemes d'étanchéité, systemes d'huile de régulation et leurs auxiliaires - Partie 1:
Exigences générales (ISO 10438-1:2003)
Ta slovenski standard je istoveten z: EN ISO 10438-1:2003
ICS:
75.180.20
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 10438-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 75.180.20
English version
Petroleum, petrochemical and natural gas industries -
Lubrication, shaft-sealing and control-oil systems and auxiliaries
- Part 1: General requirements (ISO 10438-1:2003)
Industries du pétrole, de la pétrochimie et du gaz naturel -
Systèmes de lubrification, systèmes d'étanchéité, systèmes
d'huile de régulation et leurs auxiliaires - Partie 1:
Exigences générales (ISO 10438-1:2003)
This European Standard was approved by CEN on 2 December 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10438-1:2003 E
worldwide for CEN national Members.

Foreword
This document (EN ISO 10438-1:2003) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum and natural gas industries", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2004, and conflicting national
standards shall be withdrawn at the latest by June 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 10438-1:2003 has been approved by CEN as EN ISO 10438-1:2003 without any
modifications.
INTERNATIONAL ISO
STANDARD 10438-1
First edition
2003-12-15
Petroleum, petrochemical and natural gas
industries — Lubrication, shaft-sealing
and control-oil systems and auxiliaries —
Part 1:
General requirements
Industries du pétrole, de la pétrochimie et du gaz naturel — Systèmes
de lubrification, systèmes d'étanchéité, systèmes d'huile de régulation
et leurs auxiliaires —
Partie 1: Exigences générales
Reference number
ISO 10438-1:2003(E)
©
ISO 2003
ISO 10438-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved

ISO 10438-1:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms, definitions and abbreviated terms. 2
3.1 Terms and definitions. 2
3.2 Abbreviated terms. 6
4 Dimensions and units. 8
5 System selection. 8
6 Basic design. 8
6.1 Pressure design code. 8
6.2 Design. 8
7 Piping. 9
7.1 General. 9
7.2 Oil piping. 13
7.3 Instrument piping. 13
7.4 Process piping. 13
8 Intercoolers and aftercoolers. 13
9 Instrumentation, control and electrical systems . 14
9.1 General. 14
9.2 Instrument installation. 15
9.3 Alarms and shutdowns. 16
9.4 Instrumentation. 16
9.5 Electrical systems. 19
10 Inspection, testing, and preparation for shipment . 20
10.1 General. 20
10.2 Inspection. 20
10.3 Testing. 22
10.4 Preparation for shipment . 23
11 Vendor’s data. 24
11.1 General. 24
11.2 Proposals. 25
11.3 Contract data. 26
Annex A (informative) Data sheets . 28
Annex B (informative) Typical responsibility matrix worksheet. 35
Annex C (informative) Vendor drawings and data requirements . 37
Annex D (informative) Filter ratings and cleanliness standards . 41
Bibliography . 52

ISO 10438-1:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10438-1 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures,
for the petroleum, petrochemical and natural gas industries, Subcommittee SC 6, Processing equipment and
systems.
ISO 10438 consists of the following parts, under the general title Petroleum, petrochemical and natural gas
industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries:
 Part 1: General requirements
 Part 2: Special-purpose oil systems
 Part 3: General-purpose oil systems
 Part 4: Self-acting gas seal support systems

iv © ISO 2003 – All rights reserved

ISO 10438-1:2003(E)
Introduction
ISO 10438 is based on API Std 614, 4th edn., April 1999, divided into four parts as follows:
 Part 1: General requirements (this part) is based on Chapter 1 of API Std 614;
 Part 2: Special-purpose oil systems is based on Chapter 2 of API Std 614;
 Part 3: General-purpose oil systems is based on Chapter 3 of API Std 614;
 Part 4: Self-acting gas seal support systems is based on Chapter 4 of API Std 614.
Users of this part of ISO 10438 should be aware that further or differing requirements may be needed for
individual applications. This part of ISO 1
...