75.180 - Equipment for petroleum and natural gas industries

MINOR REVISION

MINOR REVISION

MINOR REVISION

This document establishes a common basis for, and assistance in, the classification of applications and multiphase meters, as well as guidance and recommendations for the implementation and use of such meters. The so-called in-line multiphase flow meters (MPFMs) that directly measure the oil, water and gas flow rates, as well as the partial- and full-separation MPFMs are the main focus of this document. Conventional two- or three-phase separators are not included in this document. Only limited r...view more

This document gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the ...view more

This document gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requireme...view more

This document describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but...view more

This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: ? caissons, free-standing and braced; ? jackets; ? monotowers; ? towers. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (such as underwater oil storage tanks, bridges and conne...view more

This document specifies the minimum technical requirements for surface preparation, materials, application, inspection and testing of internal coating and lining systems that are intended to be applied on internal surfaces of process vessels that are subject to marked pressure/temperature changes and/or potentially corrosive conditions or processes and aggressive chemicals, used in the oil and gas industry.
This document covers both new construction and maintenance works of process vessels as w...view more

This document specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for
petroleum refinery and related applications where corrosion, erosion and other service conditions can
indicate a need for full port openings, heavy wall sections and large stem diameters.
This document sets forth the requirements for the following gate valve features:
— bolted bonnet;
— outside screw and yoke;
— rising stems;
— non-rising handwheels;
— single or double gate;
— wedge o...view more

This document specifies the requirements for a series of compact steel gate, globe and check valves for
petroleum and natural gas industry applications.
It is applicable to valves of:
— nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100,
— corresponding to nominal pipe sizes NPS ¼, ⅜, ½, ¾, 1, 1¼, 1½, 2, 2½, 3 and 4,
— pressure designations PN 16, 25, 40, 63, 100, 250 and 400, and
— pressure designations Class 150, 300, 600, 800, 1 500 and 2 500.
Class 800 is not a listed clas...view more

This document is applicable to pressure-relieving and vapour depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, Liquefied Natural Gas (LNG) facilities and oil and gas production facilities. The information provided is designed to aid in the selection of the system that is most appropriate for the risks and circumstances involved in various installations.
This document supplements API Std 521, 6th edition (2...view more

This document specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gas industry applications. It is applicable to valves of: — nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100, — corresponding to nominal pipe sizes NPS Ľ, ⅜, ˝, , 1, 1Ľ, 1˝, 2, 2˝, 3 and 4, — pressure designations PN 16, 25, 40, 63, 100, 250 and 400, and — pressure designations Class 150, 300, 600, 800, 1 500 and 2 500. Class 800 is not a listed class design...view more

This document specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions can indicate a need for full port openings, heavy wall sections and large stem diameters. This document sets forth the requirements for the following gate valve features: — bolted bonnet; — outside screw and yoke; — rising stems; — non-rising handwheels; — single or double gate; — wedge or paralle...view more

This European Standard specifies general safety requirements for the design, testing and production of manually operated elevators. The requirements are applicable for on- and off-shore applications of such elevators in the petroleum and petrochemical industries, and are in accordance with EU legislation.
This European Standard does not cover any other type of elevator. It is not applicable to the following types of products:
-   lifting nubbins;
-   lifting plugs;
-   lifting subs;
-   internal gr...view more

This document specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this document.
This document does not apply to refineries or other process plants.

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless
tubular products for casing, tubing, coupling stock and accessory material (including coupling stock
and accessory material from bar) for two product specification levels:
— PSL-1, which is the basis of this document;
— PSL-2, which provides additional requirements for a product that is intended to be both corrosion
and cracking resistant for the environments and qualification method specified i...view more

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels: — PSL-1, which is the basis of this document; — PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Ann...view more