iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 13789:1999

(Main)

Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999)

Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999)

This standard specifies a method and provides conventions for the calculation of the transmission heat loss coefficient of buildings and parts of buildings. For the purpose of this standard, the heated space is assumed to be at uniform temperature. Heat loss by ventilation is not within the scope of this standard. However, in order to evaluate transmission heat loss through unheated spaces, this standard gives conventional values of air change rates of such spaces. Annex A provides a steady state method to calculate the temperature in unheated  spaces adjacent to heated buildings.

Wärmetechnisches Verhalten von Gebäuden - Spezifischer Transmissionswärmeverlustkoeffizient - Berechnungsverfahren (ISO 13789:1999)

Diese Norm legt ein Verfahren und Hinweise zur vereinfachten Berechnung des spezifischen Transmissionswärmeverlustkoeffizienten von beheizten Räumen fest. Für diese Norm wird im Gebäude eine einheitliche Temperatur angenommen. Spezifische Lüftungswärmeverluste liegen nicht im Anwendungsbereich dieser Norm. Um jedoch den Transmissionswärmeverlustkoeffizienten für unbeheizte Räume zu berechnen gibt diese Norm übliche Luftwechsel solcher Räume an. Anhang A enthält ein stationäres Verfahren zur Berechnung der Temperatur in unbeheizten Räumen, die an beheizte Räume angrenzen.

Performance thermique des bâtiments - Coefficient de déperdition par transmission - Méthode de calcul (ISO 13789:1999)

La présente norme établit une méthode et des conventions pour le calcul du coefficient de déperdition par transmission des bâtiments. Pour les besoins de la présente norme, l'espace chauffé est supposé isotherme. Les déperditions par ventilation sortent du domaine d'application de la présente norme. Toutefois, la présente norme donne des valeurs conventionnelles pour le taux de renouvellement d'air des espaces non chauffés, afin d'évaluer les déperditions par transmission au travers de ces espaces.

Toplotne značilnosti delov stavb - Specifične toplotne izgube zaradi prehoda toplote - Računska metoda (ISO 13789:1999)

General Information

Status
Withdrawn
Publication Date
31-Aug-1999
Withdrawal Date
14-Dec-2007
ICS
91.120.10 - Thermal insulation of buildings
Technical Committee
CEN/TC 89 - Thermal performance of buildings and building components
Drafting Committee
CEN/TC 89/WG 4 - Energy use of buildings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2007
Completion Date
15-Dec-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN ISO 13789:2000 - Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999)

Relations

Replaced By
EN ISO 13789:2007 - Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2007)
Effective Date
22-Dec-2008

Buy Standard

EN ISO 13789:2000EN ISO 13789:2000
PreviousNext
Standard
EN ISO 13789:2000
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13789:2000
01-junij-2000
7RSORWQH]QDþLOQRVWLGHORYVWDYE6SHFLILþQHWRSORWQHL]JXEH]DUDGLSUHKRGD
WRSORWH5DþXQVNDPHWRGD ,62
Thermal performance of buildings - Transmission heat loss coefficient - Calculation
method (ISO 13789:1999)
Wärmetechnisches Verhalten von Gebäuden - Spezifischer
Transmissionswärmeverlustkoeffizient - Berechnungsverfahren (ISO 13789:1999)
Performance thermique des bâtiments - Coefficient de déperdition par transmission -
Méthode de calcul (ISO 13789:1999)
Ta slovenski standard je istoveten z: EN ISO 13789:1999
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation
SIST EN ISO 13789:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13789:2000

-------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 22097:2023(Main)
Thermal insulation for buildings - Reflective insulation products - Determination of thermal performance (ISO 22097:2023)
SIST EN ISO 22097:2023

This document describes a set of procedures for using existing standardized CEN or ISO test and calculation methods to determine the thermal performance of reflective insulation products. This document supports and does not replace existing CEN or ISO test methods.
This document applies to any thermal insulation product that derives a proportion of its claimed thermal properties from the presence of one or more reflective or low emissivity surfaces together with any associated airspace(s). It does not replace the existing procedures for the determination of the thermal performance of products already covered by an existing harmonized product standard where the declared value of these products does not specifically include any claims attributable to the emissivity of the facing. It does not, and cannot, give an in-use or design value of thermal performance, but provides standardized information from which these can be determined.

  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12241:2022(Main)
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2022, Corrected version 2022-11)
SIST EN ISO 12241:2022

This document gives rules for the calculation of heat-transfer-related properties of building equipment and industrial installations, predominantly under steady-state conditions. This document also gives a simplified approach for the calculation of thermal bridges.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10077-1:2017(Main)
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02)
SIST EN ISO 10077-1:2017

ISO 10077-1:2017 specifies methods for the calculation of the thermal transmittance of windows and pedestrian doors consisting of glazed and/or opaque panels fitted in a frame, with and without shutters.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10211:2017(Main)
Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017)
SIST EN ISO 10211:2017

ISO 10211:2017 sets out the specifications for a three-dimensional and a two-dimensional geometrical model of a thermal bridge for the numerical calculation of
-      heat flows, in order to assess the overall heat loss from a building or part of it, and
-      minimum surface temperatures, in order to assess the risk of surface condensation.
These specifications include the geometrical boundaries and subdivisions of the model, the thermal boundary conditions, and the thermal values and relationships to be used.
ISO 10211:2017 is based upon the following assumptions:
-      all physical properties are independent of temperature;
-      there are no heat sources within the building element.
ISO 10211:2017 can also be used for the derivation of linear and point thermal transmittances and of surface temperature factors.
NOTE   Table 1 in the Introduction shows the relative position of ISO 10211:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 52016-1:2017(Main)
Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)
SIST EN ISO 52016-1:2017

ISO 52016-1:2017 specifies calculation methods for the assessment of:
a)    the (sensible) energy need for heating and cooling, based on hourly or monthly calculations;
b)    the latent energy need for (de-)humidification, based on hourly or monthly calculations;
c)    the internal temperature, based on hourly calculations;
d)    the sensible heating and cooling load, based on hourly calculations;
e)    the moisture and latent heat load for (de-)humidification, based on hourly calculations;
f)    the design sensible heating or cooling load and design latent heat load using an hourly calculation interval;
g)   the conditions of the supply air to provide the necessary humidification and dehumidification.
The calculation methods can be used for residential or non-residential buildings, or a part of it, referred to as "the building" or the "assessed object".
ISO 52016-1:2017 also contains specifications for the assessment of thermal zones in the building or in the part of a building. The calculations are performed per thermal zone. In the calculations, the thermal zones can be assumed to be thermally coupled or not.
The calculation methods have been developed for the calculation of the basic energy loads and needs, without interaction with specific technical building systems, and for the calculation of the system specific energy loads and needs, including the interaction with specific systems. The hourly calculation procedures can also be used as basis for calculations with more extensive system control options.
ISO 52016-1:2017 is applicable to buildings at the design stage, to new buildings after construction and to existing buildings in the use phase.
NOTE  Table 1 in the Introduction shows the relative position of ISO 52016-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    216 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    227 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13786:2017(Main)
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017, Corrected version 2018-03)
SIST EN ISO 13786:2017

ISO 13786:2017 specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, ISO 13786:2017 is not applicable to building materials or to unfinished building components.
The definitions given in ISO 13786:2017 are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials.
Annex C provides simpler methods for the estimation of the heat capacities in some limited cases. These methods are suitable for the determination of dynamic thermal properties required for the estimation of energy consumption. These approximations are not appropriate, however, for product characterization.
NOTE   Table 1 in the Introduction shows the relative position of ISO 13786:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12631:2017(Main)
Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)
SIST EN ISO 12631:2017

ISO 12631:2017 specifies a method for calculating the thermal transmittance of curtain walls consisting of glazed and/or opaque panels fitted in, or connected to, frames.
The calculation includes:
-      different types of glazing, e.g. glass or plastic; single or multiple glazing; with or without low emissivity coating; with cavities filled with air or other gases;
-      frames (of any material) with or without thermal breaks;
-      different types of opaque panels clad with metal, glass, ceramics or any other material.
Thermal bridge effects at the rebate or connection between the glazed area, the frame area and the panel area are included in the calculation.
The calculation does not include:
-      effects of solar radiation;
-      heat transfer caused by air leakage;
-      calculation of condensation;
-      effect of shutters;
-      additional heat transfer at the corners and edges of the curtain walling;
-      connections to the main building structure nor through fixing lugs;
-      curtain wall systems with integrated heating.
NOTE       Table 1 in the Introduction shows the relative position of ISO 12631:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 52010-1:2017(Main)
Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017)
SIST EN ISO 52010-1:2017

ISO 52010-1:2017 specifies a calculation procedure for the conversion of climatic data for energy calculations.
The main element in ISO 52010-1:2017 is the calculation of solar irradiance on a surface with arbitrary orientation and tilt. A simple method for conversion of solar irradiance to illuminance is also provided.
The solar irradiance and illuminance on an arbitrary surface are applicable as input for energy and daylighting calculations, for building elements (such as roofs, facades and windows) and for components of technical building systems (such as thermal solar collectors, PV panels).
Other parameters of climatic data needed to assess the thermal and moisture performance of buildings, building elements or technical building systems [like wind, temperature, moisture and long-wave (thermal) radiation] are to be obtained according to the procedures in ISO 15927‑4. These data are listed in ISO 52010-1:2017 as input and passed on as output without any conversion.
NOTE 1    The reason for passing these data via ISO 52010-1:2017 is to have one single and consistent source for all EPB standards and to enable any conversion or other treatment if needed for specific application.
NOTE 2    Table 1 in the Introduction shows the relative position of ISO 52010-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13789:2017(Main)
Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2017)
SIST EN ISO 13789:2017

ISO 13789:2017 specifies a method and provides conventions for the calculation of the steady‐state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings. It is applicable both to heat loss (internal temperature higher than external temperature) and to heat gain (internal temperature lower than external temperature). For the purpose of ISO 13789:2017, the heated or cooled space is assumed to be at uniform temperature.
Annex C provides a steady‐state method to calculate the temperature in unconditioned spaces adjacent to conditioned spaces.
NOTE   Table 1 in the Introduction shows the relative position of ISO 13789:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14683:2017(Main)
Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017)
SIST EN ISO 14683:2017

ISO 14683:2007 deals with simplified methods for determining heat flows through linear thermal bridges which occur at junctions of building elements.
ISO 14683:2007 specifies requirements relating to thermal bridge catalogues and manual calculation methods.
Default values of linear thermal transmittance are given in Annex A for information.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day