EN ISO 16610-85:2013

Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)

ISO 16610-85:2013 develops the terminology and concepts for areal morphological segmentation. In particular, it describes the watershed segmentation method and the Wolf pruning method. This document assumes a continuous surface.

Geometrische Produktspezifikation (GPS) - Filterung - Teil 85: Morphologische Flächenfilterung: Segmentierung (ISO 16610-85:2013)

Dieser Teil von ISO 16610 entwickelt die Terminologie und die Konzepte der flächenhaften morphologischen Zerlegung. Er beschreibt insbesondere die Wasserscheiden Zerlegungsmethode und die Wolf Beschnei-dungsmethode.

Spécification géométrique des produits (GPS) - Filtrage - Partie 85: Filtres surfaciques morphologiques: Segmentation (ISO 16610-85:2013)

L'ISO 16610-85:2013 développe la terminologie et les concepts applicables à la segmentation morphologique surfacique. Elle décrit en particulier la méthode de segmentation par ligne de partage des eaux et la méthode d'élagage de Wolf. Le présent document suppose une surface continue.

Specifikacija geometrijskih veličin izdelka (GPS) - Filtriranje - 85. del: Morfološki ploskovni filtri: Segmentacija (ISO 16610-85:2013)

Ta del standarda ISO 16610 razvija terminologijo in pojme za morfološko ploskovno segmentacijo. Predvsem opisuje metodo delitve površja na porečja in metodo določanja razmerij med posameznimi točkami (Wolfova metoda). Ta dokument predvideva neprekinjeno površino.

General Information

• Status: Published
• Publication Date: 05-Feb-2013
• Withdrawal Date: 30-Aug-2013
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Feb-2013
• Completion Date: 06-Feb-2013
• Ref Project: SIST EN ISO 16610-85:2014 - Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16610-85:2014
01-julij-2014
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND*36)LOWULUDQMHGHO0RUIRORãNL
SORVNRYQLILOWUL6HJPHQWDFLMD,62
Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters:
Segmentation (ISO 16610-85:2013)
Geometrische Produktspezifikation (GPS) - Filterung - Teil 85: Morphologische
Flächenfilterung: Segmentierung (ISO 16610-85:2013)
Spécification géométrique des produits (GPS) - Filtrage - Partie 85: Filtres surfaciques
morphologiques: Segmentation (ISO 16610-85:2013)
Ta slovenski standard je istoveten z: EN ISO 16610-85:2013
ICS:
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 16610-85:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16610-85:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 16610-85:2014


EUROPEAN STANDARD
EN ISO 16610-85

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2013
ICS 17.040.20
English Version
Geometrical product specifications (GPS) - Filtration- Part 85:
Morphological areal filters: Segmentation (ISO 16610-85:2013)
Spécification géométrique des produits (GPS) - Filtrage - Geometrische Produktspezifikation (GPS) - Filterung - Teil
Partie 85: Filtres surfaciques morphologiques: 85: Morphologische Flächenfilterung: Segmentierung (ISO
Segmentation (ISO 16610-85:2013) 16610-85:2013)
This European Standard was approved by CEN on 30 July 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16610-85:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16610-85:2014
EN ISO 16610-85:2013 (E)
Contents Page
Foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16610-85:2014
EN ISO 16610-85:2013 (E)
Foreword
This document (EN ISO 16610-85:2013) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at
the latest by August 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16610-85:2013 has been approved by CEN as EN ISO 16610-85:2013 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 16610-85:2014

---------------------- Page: 6 ---
...