EN ISO 14246:2022/prA1

Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2022/DAM 1:2025)

Gasflaschen - Flaschenventile - Herstellungsprüfungen und -untersuchungen - Änderung 1 (ISO 14246:2022/DAM 1:2025)

Bouteilles à gaz - Robinets de bouteilles à gaz - Essais de fabrication et contrôles - Amendement 1 (ISO 14246:2022/DAM 1:2025)

Plinske jeklenke - Ventili za plinske jeklenke - Preskusi in pregledi med proizvodnjo - Dopolnilo A1 (ISO 14246:2022/DAM 1:2025)

General Information

• Status: Not Published
• Publication Date: 06-Sep-2026
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 23 - Transportable gas cylinders
• Drafting Committee: CEN/TC 23/WG 20 - Cylinder design - Fittings
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 06-Feb-2025
• Due Date: 06-Feb-2025
• Completion Date: 06-Feb-2025
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Mandate: M/TDG - Standards for referencing in the RID-ADR
• Ref Project: SIST EN ISO 14246:2022/oprA1:2025 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2022/DAM 1:2025)

Relations

• Amends: EN ISO 14246:2022 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022)
• Effective Date: 25-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2025
Plinske jeklenke - Ventili za plinske jeklenke - Preskusi in pregledi med
proizvodnjo - Dopolnilo A1 (ISO 14246:2022/DAM 1:2025)
Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1
(ISO 14246:2022/DAM 1:2025)
Gasflaschen - Flaschenventile - Herstellungsprüfungen und -untersuchungen - Änderung
1 (ISO 14246:2022/DAM 1:2025)
Bouteilles à gaz - Robinets de bouteilles à gaz - Essais de fabrication et contrôles -
Amendement 1 (ISO 14246:2022/DAM 1:2025)
Ta slovenski standard je istoveten z: EN ISO 14246:2022/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 14246:2022/
DAM 1
ISO/TC 58/SC 2
Gas cylinders — Cylinder valves
Secretariat: AFNOR
— Manufacturing tests and
examinations
Voting begins on:
2025-02-06
AMENDMENT 1
Voting terminates on:
2025-05-01
Bouteilles à gaz — Robinets de bouteilles à gaz — Essais de
fabrication et contrôles
AMENDEMENT 1
ICS: 23.020.35
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 14246:2022/DAM 1:2025(en)
DRAFT
ISO 14246:2022/DAM 1:2025(en)
Amendment
ISO 14246:2022/
DAM 1
ISO/TC 58/SC 2
Gas cylinders — Cylinder valves
Secretariat: AFNOR
— Manufacturing tests and
examinations
Voting begins on:
AMENDMENT 1
Voting terminates on:
Bouteilles à gaz — Robinets de bouteilles à gaz — Essais de
fabrication et contrôles
AMENDEMENT 1
ICS: 23.020.35
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO 14246:2022/DAM 1:2025(en)
ii
ISO 14246:2022/DAM 1:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters
...