EN ISO 5674:2009
(Main)Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
ISO 5674:2004 specifies laboratory tests for determining the strength and wear resistance of guards for PTO drive shafts on tractors and machinery used in agriculture and forestry, and their acceptance criteria. It is intended to be used in combination with ISO 5673.
ISO 5674:2004 is applicable to the testing of such PTO drive shaft guards and their restraining means. It is not applicable to the testing of guards designed and constructed to be used as steps. Neither is it applicable to guard types whose use is limited by national regulations.
Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO 5674:2004, korrigierte Fasung 2005-07-01)
Diese Internationale Norm beschreibt Laborprüfungen zur Bestimmung von Festigkeit und Verschleiß von Schutzeinrichtungen für Gelenkwellen an Traktoren und Maschinen in der Land- und Forstwirtschaft und deren Annahmekriterien. Die Anwendung in Kombination mit ISO 5673 ist beabsichtigt.
Sie gilt für die Prüfung von Gelenkwellenschutzeinrichtungen und ihren Rückhalteeinrichtungen. Sie gilt nicht für die Prüfung von Schutzeinrichtungen, die zur Benutzung als Stufen gestaltet und ausgelegt sind.
Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à cardans de prise de force - Essais de résistance mécanique et d'usure et critères d'acceptation (ISO 5674:2004, version corrigée 2005-07-01)
L'ISO 5674:2004 spécifie les essais à mener en laboratoire pour déterminer la résistance mécanique et la résistance à l'usure des protecteurs d'arbres de transmission à cardans de prise de force, et leurs critères d'acceptation. Elle est conçue pour être utilisée conjointement avec l'ISO 5673.
L'ISO 5674:2004 est applicable aux essais des protecteurs d'arbres de transmission à cardans de prise de force et à leurs systèmes d'immobilisation. Elle n'est pas applicable aux essais des protecteurs conçus et construits pour être utilisés comme des marchepieds.
Traktorji ter kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskusi trdnosti in obrabe ter merila sprejemljivosti (ISO 5674:2004, popravljena različica 2005-07-01)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5674:2009
01-junij-2009
1DGRPHãþD
SIST EN ISO 5674:2007
7UDNWRUMLWHUNPHWLMVNLLQJR]GDUVNLVWURMLâþLWQLNL]DSULNOMXþQHJUHGL3UHVNXVL
WUGQRVWLLQREUDEHWHUPHULODVSUHMHPOMLYRVWL ,62
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO)
drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004)
Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für
Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO
5674:2004)
Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à
cardans de prise de force - Essais de résistance mécanique et d'usure et critères
d'acceptation (ISO 5674:2004)
Ta slovenski standard je istoveten z: EN ISO 5674:2009
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
SIST EN ISO 5674:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5674:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 5674:2009
EUROPEAN STANDARD
EN ISO 5674
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 65.060.01 Supersedes EN ISO 5674:2006
English Version
Tractors and machinery for agriculture and forestry - Guards for
power take-off (PTO) drive-shafts - Strength and wear tests and
acceptance criteria (ISO 5674:2004)
Tracteurs et matériels agricoles et forestiers - Protecteurs
d'arbres de transmission à cardans de prise de force -
Essais de résistance mécanique et d'usure et critères
d'acceptation (ISO 5674:2004)
This European Standard was approved by CEN on 26 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5674:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5674:2009
EN ISO 5674:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5674:2009
EN ISO 5674:2009 (E)
Foreword
The text of ISO 5674:2004 has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery
for agriculture and forestry” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 5674:2009 by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and
forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5674:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For
...
SLOVENSKI STANDARD
SIST EN ISO 5674:2009
01-junij-2009
Nadomešča:
SIST EN ISO 5674:2007
Traktorji ter kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskusi
trdnosti in obrabe ter merila sprejemljivosti (ISO 5674:2004, popravljena različica
2005-07-01)
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO)
drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected
version 2005-07-01)
Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für
Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO
5674:2004, korrigierte Fasung 2005-07-01)
Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à
cardans de prise de force - Essais de résistance mécanique et d'usure et critères
d'acceptation (ISO 5674:2004, version corrigée 2005-07-01)
Ta slovenski standard je istoveten z: EN ISO 5674:2009
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
SIST EN ISO 5674:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5674:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 5674:2009
EUROPEAN STANDARD
EN ISO 5674
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 65.060.01 Supersedes EN ISO 5674:2006
English Version
Tractors and machinery for agriculture and forestry - Guards for
power take-off (PTO) drive-shafts - Strength and wear tests and
acceptance criteria (ISO 5674:2004, corrected version 2005-07-
01)
Tracteurs et matériels agricoles et forestiers - Protecteurs Traktoren und land- und forstwirtschaftliche Maschinen -
d'arbres de transmission à cardans de prise de force - Schutzeinrichtungen für Gelenkwellen - Festigkeits- und
Essais de résistance mécanique et d'usure et critères Verschleißprüfungen und Annahmekriterien (ISO
d'acceptation (ISO 5674:2004, version corrigée 2005-07- 5674:2004, korrigierte Fassung 2005-07-01)
01)
This European Standard was approved by CEN on 26 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5674:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5674:2009
EN ISO 5674:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5674:2009
EN ISO 5674:2009 (E)
Foreword
The text of ISO 5674:2004, corrected version 2005-07-01 has been prepared by Technical Committee
ISO/TC 23 “Tractors and machinery for agriculture and forestry” of the International Organization for
Standardization (ISO) and has been taken over as EN ISO 5674:2009 by Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.