EN ISO 5674:2006

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

2006-10-18  EN ISO 5674:2006 effectively replaces EN 1152:1994 considering that the 2004 edition of EN ISO 5674:2004 had to be re-issued for technical reasons.
2006-01-04 - ISO have issued a corrected version.

Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO 5674:2004, korrigierte Fassung 2005-07-01)

Diese Internationale Norm beschreibt Laborprüfungen zur Bestimmung von Festigkeit und Verschleiß von Schutzeinrichtungen für Gelenkwellen an Traktoren und Maschinen in der Land- und Forstwirtschaft und deren Annahmekriterien. Die Anwendung in Kombination mit ISO 5673 ist beabsichtigt.
Sie gilt für die Prüfung von Gelenkwellenschutzeinrichtungen und ihren Rückhalteeinrichtungen. Sie gilt nicht für die Prüfung von Schutzeinrichtungen, die zur Benutzung als Stufen gestaltet und ausgelegt sind.

Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à cardans de prise de force - Essais de résistance mécanique et d'usure et critères d'acceptation (ISO 5674:2004, version corrigée 2005-07-01)

Traktorji ter kmetijski in gozdarski stroji – Ščitniki za priključne gredi – Preskusi trdnosti in obrabe ter merila sprejemljivosti (ISO 5674:2004, popravljena izdaja 2005-07-01)

General Information

• Status: Withdrawn
• Publication Date: 17-Oct-2006
• Withdrawal Date: 24-Feb-2009
• ICS: 65.060.01 - Agricultural machines and equipment in general
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 25-Feb-2009
• Completion Date: 25-Feb-2009
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Ref Project: SIST EN ISO 5674:2007 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

Relations

• Replaces: EN 1152:1994 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests
• Effective Date: 22-Dec-2008
• Replaces: EN ISO 5674:2004 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004)
• Effective Date: 22-Dec-2008
• Replaces: EN 1152:1994/AC:1998 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests
• Effective Date: 22-Dec-2008
• Replaces: EN ISO 5674:2004/AC:2004 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 5674:2009 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
• Effective Date: 04-Mar-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5674:2007
01-marec-2007
7UDNWRUMLWHUNPHWLMVNLLQJR]GDUVNLVWURML±âþLWQLNL]DSULNOMXþQHJUHGL±3UHVNXVL
WUGQRVWLLQREUDEHWHUPHULODVSUHMHPOMLYRVWL,62SRSUDYOMHQDL]GDMD

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO)
drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected
version 2005-07-01)
Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für
Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO
5674:2004, korrigierte Fassung 2005-07-01)
Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission a
cardans de prise de force - Essais de résistance mécanique et d'usure et criteres
d'acceptation (ISO 5674:2004, version corrigée 2005-07-01)
Ta slovenski standard je istoveten z: EN ISO 5674:2006
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
SIST EN ISO 5674:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 5674
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2006
ICS 65.060.01 Supersedes EN ISO 5674:2004
English Version
Tractors and machinery for agriculture and forestry - Guards for
power take-off (PTO) drive-shafts - Strength and wear tests and
acceptance criteria (ISO 5674:2004, corrected version 2005-07-
01)
Tracteurs et matériels agricoles et forestiers - Protecteurs Traktoren und land- und forstwirtschaftliche Maschinen -
d'arbres de transmission à cardans de prise de force - Schutzeinrichtungen für Gelenkwellen - Festigkeits- und
Essais de résistance mécanique et d'usure et critères Verschleißprüfungen und Annahmekriterien (ISO
d'acceptation (ISO 5674:2004, version corrigée 2005-07- 5674:2004, korrigierte Fassung 2005-07-01)
01)
This European Standard was approved by CEN on 18 September 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5674:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 5674:2006 (E)






Foreword



The text of ISO 5674:2004 has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry” of the International Organization for Standardization (ISO)
and has been taken over as EN ISO 5674:2006 by Technical Committee CEN/TC 144 "Tractors
and machinery for agriculture and forestry", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2007, and conflicting national
standards shall be withdrawn at the latest by April 2007.

This document supersedes EN ISO 5674:2004.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 5674:2004 has been approved by CEN as EN ISO 5674:2006 without any
modifications.

2

-----
...