iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 17075:2007

(Main)

Leather - Chemical tests - Determination of chromium(VI) content (ISO 17075:2007)

Leather - Chemical tests - Determination of chromium(VI) content (ISO 17075:2007)

ISO 17075:2007 specifies a method for determining chromium(VI) in solutions leached from leather under defined conditions. The method described is suitable to quantify the chromium(VI) content in leathers down to 3 mg/kg.

Leder - Chemische Prüfungen - Bestimmung des Chrom(VI)-Gehalts (ISO 17075:2007)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Chrom(VI)-Gehaltes in Lösungen fest, die aus Leder unter festgelegten Bedingungen extrahiert wurden. Das beschriebene Verfahren ist geeignet, den Chrom(VI)-Gehalt in Leder ab 3 mg/kg quantitativ zu bestimmen
Das vorliegende Dokument gilt für alle Lederarten.

Cuir - Essais chimiques - Détermination de la teneur en chrome(VI) (ISO 17075:2007)

L'ISO 17075:2007 spécifie une méthode de détermination de la teneur en chrome(VI) de solutions obtenues par lessivage du cuir dans des conditions définies. La méthode décrite est adaptée à la quantification dans les cuirs de teneurs en chrome(VI) pouvant descendre jusqu'à 3 mg/kg.

Usnje - Kemični preskusi - Določevanje kroma VI (ISO 17075:2007)

General Information

Status
Withdrawn
Publication Date
14-Nov-2007
Withdrawal Date
14-Feb-2017
ICS
59.140.30 - Leather and furs
Technical Committee
CEN/TC 289 - Leather
Drafting Committee
CEN/TC 289/WG 2 - Physical test methods
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Feb-2017
Ref Project
SIST EN ISO 17075:2008 - Leather - Chemical tests - Determination of chromium(VI) content (ISO 17075:2007)

Relations

Replaces
CEN/TS 14495:2003 - Leather - Chemical tests - Determination of chromium VI content
Effective Date
22-Dec-2008
Replaced By
EN ISO 17075-1:2017 - Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method (ISO 17075-1:2017)
Effective Date
08-Jun-2022
Replaced By
EN ISO 17075-2:2017 - Leather - Chemical determination of chromium(VI) content in leather - Part 2: Chromatographic method (ISO 17075-2:2017)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 17075:2008EN ISO 17075:2008
PreviousNext
Standard
EN ISO 17075:2008
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17075:2008
01-februar-2008
1DGRPHãþD
SIST-TS CEN/TS 14495:2004
8VQMH.HPLþQLSUHVNXVL'RORþHYDQMHNURPD9, ,62
Leather - Chemical tests - Determination of chromium(VI) content (ISO 17075:2007)
Leder - Chemische Prüfungen - Bestimmung des Chrom(VI)-Gehalts (ISO 17075:2007)
Cuir - Essais chimiques - Détermination de la teneur en chrome(VI) (ISO 17075:2007)
Ta slovenski standard je istoveten z: EN ISO 17075:2007
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 17075:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 17075
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2007
ICS 59.140.30 Supersedes CEN/TS 14495:2003
English Version
Leather - Chemical tests - Determination of chromium(VI)
content (ISO 17075:2007)
Cuir - Essais chimiques - Détermination de la teneur en Leder - Chemische Prüfungen - Bestimmung des
chrome(VI) (ISO 17075:2007) Chrom(VI)-Gehalts (ISO 17075:2007)
This European Standard was approved by CEN on 24 October 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17075:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 17075:2007 (E)
Contents Page
Foreword.3
2

---------------------- Page: 3 ----------------------

EN ISO 17075:2007 (E)
Foreword
This document (EN ISO 17075:2007) has been prepared by Technical Committee CEN/TC 289 "Leather", the
secretariat of which is held by UNI, in collaboration with the International Union of Leather Technologists and
Chemists Societies (IULTCS).
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the
latest by May 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 14495:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 17075
IULTCS/IUC
18
First edition
2007-11-15

Leather — Chemical tests —
Determination of chromium(VI) content
Cuir — Essais chimiques — Détermination de la teneur en chrome(VI)




Reference number
ISO 17075:2007(E)
IULTCS/IUC 18:2007(E)
©
ISO 2007

---------------------- Page: 5 ----------------------

ISO 17075:2007(E)
IULTCS/IUC 18:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Deta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 20137:2023(Main)
Leather - Chemical tests - Guidelines for testing critical chemicals in leather (ISO 20137:2023)
SIST EN ISO 20137:2024

This document provides lists of chemicals that have already been detected in leather and guidelines for applying the available chemical test methods for leather. This information can be used by those involved in setting specifications for leather, especially for those parameters relating to restricted chemical substances.
Generic lists of restricted chemicals used on the market contain many substances that are not relevant to the leather industry. Those chemical substances that are not mentioned in this document do not need to be determined, thus avoiding unnecessary analytical costs.
NOTE            Due to the constantly changing legal requirements and toxicological evaluation of chemical substances, this document cannot address all potentially critical substances.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16484:2023(Main)
Leather - Requirements for the determination of the origin of leather production
SIST EN 16484:2023

This document defines the requirements that are necessary to confer the origin of leather production based on the principle of the last substantial transformation according to Non-Preferential Rules of Origin.
This document is applicable to leather only and it is applicable also to leather with hair. Furs are excluded.
The country of origin of raw hides and skins isn’t relevant for the application of this document.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17900:2023(Main)
Leather - Standard data for the calculation of leather density
SIST EN 17900:2023

This document specifies average values of leather density, depending on animal origin and thickness of finished leather, to be used for the calculation of LCA. This document is applicable to bovine, caprine and ovine types of leather.
This document does not apply to vegetable sole leather which is traded by weight.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11936:2023(Main)
Leather - Determination of total content of certain bisphenols (ISO 11936:2023)
SIST EN ISO 11936:2023

This document specifies a method for determining the total content (solvent extractible) of the following bisphenols in leather:
—     bisphenol A;
—     bisphenol B;
—     bisphenol F;
—     bisphenol S.
This method requires the use of liquid chromatography (LC) with either a single quadrupole mass spectrometer (MS), a triple quadrupole mass spectrometer (MS/MS), an ultraviolet (UV) detector, a diode array detector (DAD) or a fluorescence detector (FLD) to identify and quantify the bisphenols.
NOTE            This method can also be used for other bisphenols if they are validated by the laboratory.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23702-1:2023(Main)
Leather - Per- and polyfluoroalkyl substances - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography (ISO 23702-1:2023)
SIST EN ISO 23702-1:2023

This document specifies a test method for detection and quantification of extractable non-volatile per- and polyfluoroalkyl substances (PFAS) in leather and coated leather by solvent extraction and liquid chromatography coupled with mass spectrometry.
This document, taking into account the three-dimensional distribution of the fibres within leather, makes the evaluation of the PFAS with respect to the mass.
PFAS substances categories and applications are listed in Annex A, Table A.1. Classes of PFAS regulated compounds listed in Annex B, Table B.1, include acids, telomers, sulfonates and sulphonamide alcohols. Classes of other non-regulated compounds that can be determined by this document are listed in Annex C, Table C.1.
NOTE 1        By applying the method specified in this document, the concentration of free fluorotelomer alcohols (FTOH) in a sample cannot be correctly quantified if perfluoropolymers that release FTOH due to transesterification with the extraction solvent methanol are present in the sample.
NOTE 2        Some regulations (e.g. Reference [4]) also restrict perfluoropolymers having a linear or branched perfluoroheptyl group with the moiety (C7F15)C as one of the structural elements that can degrade to PFOA, e.g. polymers containing 2-perfluorooctylethanol (8:2 FTOH, CAS Registry Number® 678-39-7) bonded as esters. To determine whether these perfluoropolymers are intentionally present, it could be necessary to introduce an alkaline hydrolysis method to remove the 8:2 FTOH side-chain from the polymer. In addition, other FTOH, e.g. 6:2 FTOH or 10:2 FTOH, will be released from relevant perfluoropolymers by alkaline hydrolysis.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18218-1:2023(Main)
Leather - Determination of ethoxylated alkylphenols (APEO) - Part 1: Direct method (ISO 18218-1:2023)
SIST EN ISO 18218-1:2023

This document is a method for determining ethoxylated alkylphenols (APEO) [nonyphenol ethoxylate (NPEOn, where 2 ≤ n ≤ 16) and octylphenol ethoxylate (OPEOn, where 2 ≤ n ≤ 16)] in leather. This direct method is especially suitable when a larger number of leather samples are to be checked for the presence of ethoxylated alkylphenols.
This method requires the use of liquid chromatography (LC) with a triple quadrupole mass spectrometer (MS/MS) to identify and quantify the ethoxylated alkylphenols.
NOTE 1        In the leather industry, the most commonly used ethoxylated alkylphenol is the NPEO, with an average of 9 EO. It has an optimum cloud point in water for the typical leather processing temperatures of 40 °C to 55 °C.
NOTE 2        This document and ISO 18218-2 use different solvents for the extraction of the ethoxylated alkylphenols from leather. Consequently, the two analytical methods are expected to give similar trends but not necessarily the same absolute result for the ethoxylated alkylphenol content in leather.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2418:2023(Main)
Leather - Chemical, physical, mechanical and fastness tests - Position and preparation of specimens for testing (ISO 2418:2023)
SIST EN ISO 2418:2023

This document specifies the position of laboratory test specimens within a piece of leather and the method of labelling and marking the laboratory test specimens for future identification. In addition, this document specifies the design of press knives for cutting test pieces and the preparation of test pieces.
It is applicable to all types of leather derived from mammals, irrespective of the tanning used.
It is not applicable to leathers derived from birds, fish, reptiles or furs.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14268:2023(Main)
Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2023)
SIST EN ISO 14268:2023

This document describes a method for determining the water vapour permeability of leather and provides alternative methods of sample preparation and for the measurement procedure.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19076:2023(Main)
Leather - Measurement of leather surface - Electronic techniques (ISO 19076:2023)
SIST EN ISO 19076:2023

This document provides a method for the measurement of the surface of leather or leather parts by the use of electronic measuring machines.
It applies to the measurement of leather (or leather parts) fulfilling the following requirements:
—    flexible leather, finished or unfinished dry leather;
—    flexible wet leather (see Annex E);
—    flexibility, such as to allow full distension on the measuring line or surface.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7906:2022(Main)
Leather - Tests for colour fastness - General principles of testing (ISO 7906:2022)
SIST EN ISO 7906:2023

This document specifies general principles on colour fastness evaluation tests for leather, as listed in Annex A.
Procedures included in this document are common to most of the fastness test methods.
This document provides a common basis for testing and reporting colour fastness. The uses and limitations of the methods are pointed out, several terms are defined, an outline of the drafting of the methods is given and the contents of the clauses describing the methods are discussed.
Procedures common to a number of the methods are discussed briefly.
Colour fastness means the resistance of the colour to the different agents to which these materials can be exposed during manufacture and their subsequent use.
The change in colour of leather and staining of undyed adjacent fabrics or other materials are assessed as fastness ratings.
Other visible changes in the leather under test, for example surface appearance, change in gloss or shrinkage, are considered as separate properties and reported as such.
The leather fastness test methods can be used not only for assessing leather and related materials, such as coated leather and leather board, but also for the eventual assessment of the colour fastness of leather dyes. When such a method is so used, the dye is applied to a specified retanned leather or crust leather in defined depths of colour by stated procedures and the material is then tested in the usual way.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day