Railway applications - Tank wagons - Part 7: Platforms and ladders

This European Standard applies to ladders, platforms and walkways on tank wagons fitted with top devices. It does not apply to crossing gangways nor to steps in so far as they are covered by UIC leaflets. This European Standard defines the important dimensions for manufacturers and operators of such tank wagons and takes into consideration the relevant and applicable construction and safety guidelines.
This European Standard applies to new tank wagons built after the 1st January 2010.
In consideration of the smaller loading gauge within the UK, this European Standard does not apply to wagons operating exclusively therein.

Bahnanwendungen - Kesselwagen - Teil 7: Arbeitsbühnen und Leitern

Diese Norm gilt für Leitern, Arbeitsbühnen und Laufstegen an Kesselwagen, die mit oben liegenden Einrichtungen ausgestattet sind. Sie gilt nicht für Übergangsbühnen und Tritte, soweit diese in UIC-Merkblättern festgelegt sind. Diese Norm legt die wichtigen Abmessungen für die Hersteller und Anwender solcher Kesselwagen fest und berücksichtigt die entsprechenden gültigen Konstruktions- und Sicherheitsrichtlinien.
Diese Europäische Norm gilt für neue Kesselwagen, die nach dem 1. Januar 2010 gebaut werden.
Diese Europäische Norm gilt in Anbetracht kleinerer Fahrzeugbegrenzungen innerhalb Großbritanniens nicht für Wagen die ausschließlich dort betrieben werden.

Applications ferrovaires - Wagons citernes - Partie 7: Plate-formes et échelles

La présente Norme européenne s’applique aux échelles, plates-formes et passerelles montées sur les wagons citernes pourvus de dispositifs en haut de la citerne. Elle ne s’applique pas aux plates-formes de franchissement ni aux marchepieds dans la mesure où ils font l’objet de fiches UIC. La présente Norme européenne définit les dimensions essentielles pour les constructeurs et les exploitants de ces wagons citernes et tient compte des recommandations de construction et de sécurité applicables et en vigueur.
La présente Norme européenne s’applique aux nouveaux wagons citernes fabriqués après le 1er janvier 2010.
En considération du gabarit de chargement plus petit au Royaume-Uni, la présente Norme européenne ne s’applique pas aux wagons exploités exclusivement de cette façon.

Železniške naprave - Vagoni-cisterne - 7. del: Delovni odri (ploščadi) in lestve

Ta evropski standard velja za lestve, ploščadi in prehode na vagonih-cisternah, opremljenih z napravami na vrhu. Ne velja za prečne mostičke ali stopnice, če jih zajemajo brošure UIC. Ta evropski standard opredeljuje pomembne mere za proizvajalce in upravljavce takih vagonov-cistern in upošteva ustrezne veljavne smernice za konstrukcijo in varnost. Ta evropski standard velja za nove vagone-cisterne, narejene po 1. januarju 2010. Glede na manjši gabarit v Veliki Britaniji ta evropski standard ne velja za vagone, ki obratujejo izključno tam.

General Information

Publication Date
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date


Buy Standard

EN 12561-7:2011
English language
12 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Kesselwagen - Teil 7: Arbeitsbühnen und LeiternApplications ferrovaires - Wagons citernes - Partie 7: Plate-formes et échellesRailway applications - Tank wagons - Part 7: Platforms and ladders45.060.20Železniški vagoniTrailing stockICS:Ta slovenski standard je istoveten z:EN 12561-7:2011SIST EN 12561-7:2011en,fr,de01-oktober-2011SIST EN 12561-7:2011SLOVENSKI

SIST EN 12561-7:2011

EN 12561-7
June 2011 ICS 45.060.20 Supersedes EN 12561-7:2004English Version
Railway applications - Tank wagons - Part 7: Platforms and ladders
Applications ferrovaires - Wagons citernes - Partie 7: Plate-formes et échelles
Bahnanwendungen - Kesselwagen - Teil 7: Arbeitsbühnen und Leitern This European Standard was approved by CEN on 3 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12561-7:2011: ESIST EN 12561-7:2011

EN 12561-7:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Ladders .44.1 General .44.2 Main dimensions .64.3 Design values .64.4 Marking .65 Platforms .95.1 General .95.2 Design values . 106 Walkways . 106.1 General . 106.2 Main dimensions . 106.3 Design values . 107 Characteristics of the grating . 107.1 Resistance to friction

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.