EN 14286:2008

Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods

This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for tanks for the storage and transportation of dangerous goods, in particular of gasoline and other liquid hydrocarbons.
It applies to hot or cold-rolled strip, sheet and plate with a thickness from 3,0 mm and up to and including 12,0 mm used as a wall material.
NOTE   Compliance with the present document does not ensure compliance with national or international regulations. The user of the document is responsible for checking that the material he orders or sells complies with all applicable regulations. Depending on the chemical and physical properties of the dangerous good to be transported or stored, it can be necessary to agree on additional properties or inspection conditions in order to comply with applying regulations.

Aluminium und Aluminiumlegierungen - Schweißbare Walzerzeugnisse für Tanks für Lagerung und Transport von Gefahrgut

Dieses Dokument legt die Technischen Lieferbedingungen, die mechanischen Eigenschaften, die Grenzabmaße
und Formtoleranzen für gewalztes Halbzeug aus Aluminiumlegierungen fest, das für die Herstellung
von Tanks zur Lagerung und zum Transport von Gefahrgut, speziell für Benzin und andere flüssige Kohlenwasserstoffe,
vorgesehen ist.
Es gilt für warm- oder kaltgewalzte Bänder, Bleche und Platten mit einer Dicke von 3,0 mm bis 12,0 mm, die
als Wandmaterial eingesetzt werden.
ANMERKUNG Die Übereinstimmung mit dem vorliegenden Dokument garantiert nicht die Übereinstimmung mit
nationalen oder internationalen Vorschriften. Der Anwender dieses Dokuments ist für die Überprüfung verantwortlich, dass
das Erzeugnis, das er bestellt oder verkauft, mit allen zutreffenden Vorschriften übereinstimmt. Abhängig von den
chemischen und physikalischen Eigenschaften des Gefahrgutes, das transportiert oder gelagert werden soll, kann es
notwendig sein, zusätzliche Eigenschaften oder Technische Lieferbedingungen zu vereinbaren, damit sie mit den
geltenden Vorschriften übereinstimmen.

Aluminium et alliages d'aluminium - Produits laminés soudables pour réservoirs de stockage et de transport des matières dangereuses

Le présent document spécifie les conditions techniques de contrôle et de livraison, les caractéristiques
mécaniques, les tolérances de dimension et de forme des produits semi-finis laminés en alliages d’aluminium
pour réservoirs de stockage et de transport de matières dangereuses, en particulier l’essence et autres
hydrocarbures liquides.
Il s’applique aux tôles minces, bandes et tôles épaisses laminées à froid ou à chaud, d’une épaisseur
comprise entre 3,0 mm et 12,0 mm inclus, utilisées comme matériau d’enveloppe.
NOTE La conformité au présent document ne confère pas conformité aux réglementations nationales ou
internationales. L’utilisateur du document est responsable de vérifier que le matériau qu’il commande ou vend est
conforme à toutes les réglementations applicables. Suivant les caractéristiques chimiques et physiques de la matière
dangereuse à transporter ou à stocker, il peut être nécessaire de se mettre d’accord sur des caractéristiques ou des
conditions de contrôle supplémentaires pour vérifier la conformité à la réglementation.

Aluminij in aluminijeve zlitine - Varivi valjani izdelki za rezervoarje za shranjevanje in prevažanje nevarnih snovi

General Information

• Status: Published
• Publication Date: 02-Sep-2008
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 7 - Sheets, strips and plates
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Dec-2024
• Completion Date: 02-Dec-2024
• Ref Project: SIST EN 14286:2008 - Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods

Relations

• Replaces: EN 14286:2007 - Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Varivi valjani izdelki za rezervoarje za shranjevanje in prevažanje nevarnih snoviAluminium und Aluminiumlegierungen - Schweißbare Walzerzeugnisse für Tanks für Lagerung und Transport von GefahrgutAluminium et alliages d'aluminium - Produits laminés soudables pour réservoirs de stockage et de transport des matières dangereusesAluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods77.150.10Aluminijski izdelkiAluminium products23.020.10UH]HUYRDUMLStationary containers and tanks13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 14286:2008SIST EN 14286:2008en,fr,de01-november-2008SIST EN 14286:2008SLOVENSKI
STANDARDSIST EN 14286:20071DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14286September 2008ICS 77.150.10Supersedes EN 14286:2007
English VersionAluminium and aluminium alloys - Weldable rolled products fortanks for the storage and transportation of dangerous goodsAluminium et alliages d'aluminium - Produits laminéssoudables pour réservoirs de stockage et de transport desmatières dangereusesAluminium und Aluminiumlegierungen - SchweißbareWalzerzeugnisse für Tanks für Lagerung und Transport vonGefahrgutThis European Standard was approved by CEN on 8 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14286:2008: ESIST EN 14286:2008

Explanation of temper designations used in Table 1 based on definitions of EN 515.11 Bibliography.12
(yield strength) and A (elongation after fracture) have been completed. CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory condition, then this product shall be removed from the corresponding document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
98 MPa, or smaller than 6 times the thickness if Rm > 98 MPa; d) for thickness from 6 mm to 12 mm, the bending radius at 90° shall be measured according to EN 485-1. Unless otherwise specified by the purchaser, the "capability clause" shall apply for bending radius. For the materials recommended in Clause 4, the mechanical properties at ambient temperature shall conform to Table 1. Higher mechanical properties can be agreed
...