iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 4652-221:2017/AC:2018

(Corrigendum)

Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard

Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard

TC - English version only; corrects a number in the row dedicated to EN 2591-202 in Table 6.

Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 211: Typ 2, TNC-Schnittstelle - Crimpverbindung - freier Steckverbinder - 90° abgewinkelt - Produktnorm

Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 221 : Type 2, interface TNC - Version à sertir - Fiche coudée - Norme de produit

Aeronavtika - Konektorji, koaksialni, radiofrekvenčni - 221. del: Tip 2, vmesnik TNC - Izvedba s stisljivimi priključki - Pravokotni vtič - Standard za proizvod - Popravek AC

General Information

Status
Published
Publication Date
30-Jan-2018
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-Jan-2018
Completion Date
31-Jan-2018
Ref Project
SIST EN 4652-221:2018/AC:2018 - Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard

Relations

Corrects
EN 4652-221:2017 - Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard
Effective Date
06-Dec-2017

Buy Standard

EN 4652-221:2018/AC:2018EN 4652-221:2018/AC:2018
PreviousNext
Corrigendum
EN 4652-221:2018/AC:2018
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.$&Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 211: Typ 2, TNC-Schnittstelle - Crimpverbindung - freier Steckverbinder - 90° abgewinkelt - ProduktnormSérie aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 221 : Type 2, interface TNC - Version à sertir - Fiche coudée - Norme de produitAerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4652-221:2017/AC:2018SIST EN 4652-221:2018/AC:2018en01-april-2018SIST EN 4652-221:2018/AC:2018SLOVENSKI

STANDARD
SIST EN 4652-221:2018/AC:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4652-221:2017/AC
January 2018
Janvier 2018
Januar 2018 ICS 49.060 English version Version Française Deutsche Fassung

Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard

Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 221 : Type 2, interface TNC - Version à sertir - Fiche coudée - Norme de produit

Luft-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 4650:2023(Main)
Aerospace series - Wire and cable marking process, UV Laser
SIST EN 4650:2023

This document is applicable to the marking of aerospace vehicle electrical wires and cables using ultraviolet (UV) lasers.
This document specifies the process requirements for the implementation of UV laser marking of aerospace electrical wire and cable and fibre optic cable to achieve an acceptable quality mark using equipment designed for UV laser wire marking of identification codes on aircraft wire and cable subject to EN 3475-100, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General. Wiring specified as UV laser markable and which has been marked in accordance with this document will conform to the requirements of EN 3838.
This document is applicable to the marking of airframe electrical wires and cables using ultraviolet (UV) lasers. The laser process practices defined in this document are mandatory.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4056-005:2023(Main)
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
SIST EN 4056-005:2023

This document specifies the required characteristics of cable ties with a metallic locking device manufactured from plastics material, for installation under controlled tension on aircraft cable harnesses.
It is used together with EN 4056-001.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4708-203:2022(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 203: polyvinylidene fluoride (PVDF) Identification sleeves - Operating Temperature range -55ºC to 225ºC - Product Standard
SIST EN 4708-203:2023

This document specifies the required characteristics for heat-shrinkable semi rigid polyvinylidene identification sleeves for use in aircraft electrical systems at operating temperatures between -55 °C and 225 °C.
This specification is for the characterisation of Identification sleeves only.
This sleeving is a semi rigid tough product and is suitable for use where high temperatures and extreme fluid resistance properties are required.
It is available with a shrink ratio of 2:1.
The product is normally supplied with internal diameters up to 38 mm
The standard colours are white, black or yellow
For use at temperatures above 200 °C black with white or silver ink is recommended
Sizes or colours other than those specifically listed in this standard may be available. These items shall be considered to comply with this document if they comply with the property requirements listed in tables 2 and 3 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the evaluation. The sleeve will only be considered as meeting the requirements of this specification if printed with the printer, ribbon/inks and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2235:2022(Main)
Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification
SIST EN 2235:2023

This document specifies the required characteristics, test methods, qualification and acceptance conditions of single and multicore cables, screened, jacketed and multicore jacketed cables for use in aircraft electrical systems.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4708-201:2022(Main)
Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard
SIST EN 4708-201:2023

This document specifies the required characteristics for heat-shrinkable polyolefin identification
sleeving for use in aircraft electrical systems at operating temperatures between −55 °C and 135 °C.
This specification is for the characterisation of identification sleeves only.
This sleeving is flexible and flame retarded, and is available with 2:1 and 3:1 shrink ratios.
The product is normally supplied with internal diameters up to 57 mm.
The standard colours are white or yellow.
Sizes or colours other than those specifically listed in this standard may be available. These items are
considered to comply with this document if they comply with the property requirements listed in tables 3
and 4 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the
evaluation. The sleeve will only be considered as meeting the requirements of this document if printed
with the printer, ribbon, inks, and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3475-505:2023(Main)
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
SIST EN 3475-505:2023

This document specifies a method of measuring the tensile properties of stranded conductors, single strands, solid conductors and braids.
When required, it can be used also on insulated wires and cables after removing the insulation.
It is intended to be used together with EN 3475-100.

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-011:2022(Main)
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
SIST EN 3375-011:2023

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The impedance is 100 Ω ± 15 Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2997-002:2022(Main)
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
SIST EN 2997-002:2023

This document specifies the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4703:2022(Main)
Aerospace series - Test specification for verification of the permeability of electrical insulation
SIST EN 4703:2023

This document specifies a test that determines the ability of electrical equipment to withstand wet atmospheres in combination with variable ambient air pressure in particular in an aircraft installation. The main adverse effects to be anticipated are fluid ingress and related insulation breakdown.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2266-008:2022(Main)
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard
SIST EN 2266-008:2023

This document specifies the characteristics of UV laser printable multicore jacketed electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between −55 °C and 200 °C.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day