prEN 1288-2 rev

Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2014)

Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 2: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de grandes surfaces de sollicitation

Glas im Bauwesen - Bestimmung der Biegefestigkeit von Glas - Teil 2: Doppelring - Biegeversuch an plattenförmigen Proben mit großen Prüfflächen (ISO/DIS 1288-2:2014)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Biegefestigkeit von Glas im Bauwesen unter Ausschluss von Kanteneinflüssen fest.
Die Grenzen der Anwendbarkeit dieser Norm sind in ISO 1288-1 beschrieben.
ISO 1288-1 sollte in Verbindung mit dieser Norm gelesen werden.

Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 2: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de grandes surfaces de sollicitation (ISO/DIS 1288-2:2014)

Steklo v stavbah - Ugotavljanje upogibne trdnosti stekla - 2. del: Metoda soosnega dvojnega obroča na ravnem steklu z velikimi površinami (ISO/DIS 1288-2:2014)

General Information

• Status: Not Published
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129 - Glass in building
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 11-Mar-2016
• Ref Project: oSIST prEN ISO 1288-2:2014 - Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2014)

Relations

• Revises: EN 1288-2:2000 - Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2014
6WHNORYVWDYEDK8JRWDYOMDQMHXSRJLEQHWUGQRVWLVWHNODGHO0HWRGDVRRVQHJD
GYRMQHJDREURþDQDUDYQHPVWHNOX]YHOLNLPLSRYUãLQDPL,62',6
Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double
-ring test on flat specimens with large test surface areas (ISO/DIS 1288-2:2014)
Glas im Bauwesen - Bestimmung der Biegefestigkeit von Glas - Teil 2: Doppelring -
Biegeversuch an plattenförmigen Proben mit großen Prüfflächen (ISO/DIS 1288-2:2014)
Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie
2: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de grandes
surfaces de sollicitation (ISO/DIS 1288-2:2014)
Ta slovenski standard je istoveten z: prEN ISO 1288-2 rev
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 1288-2
ISO/TC 160/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2014-01-09 2014-06-09
Glass in building — Determination of the bending strength
of glass —
Part 2:
Coaxial double-ring test on flat specimens with large test
surface areas
Verre dans la construction — Détermination de la résistance du verre à la flexion —
Partie 2: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de grandes surfaces de
sollicitation
ICS: 81.040.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1288-2:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013

ISO/DIS 1288-2:2013(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved

FDIS 1288-2
Contents
Foreword
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols (and abbreviated terms) . 2
5 Principle of test method . 3
6 Apparatus . 3
6.1 Testing machine . 3
6.2 Loading device . 6
6.3 Measuring instruments . 6
7 Sample . 6
7.1 Shape and dimensions of the specimens . 6
7.2 Sampling and preparation of specimens . 7
7.3 Number of specimens . 7
8 Procedure . 7
8.1 Temperature . 7
8.2 Humidity . 7
8.3 Thickness measurement . 7
8.4 Base plate . 8
8.5 Positioning of specimen and loading ring . 8
8.6 Load application . 8
8.7 Loading rate . 8
8.8 Location of the origin . 9
8.9 Assessment of residual stresses . 9
9 Evaluation . 9
9.1 Limitation of the evaluation . 9
9.2 Calculation of bending strength . 9
10 Test report . 11
Annex A (informative) Example of a device for keeping the gas pressure, p, in line with the piston
force, F . 13
Bibliography . 16

FDIS 1288-2
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 1288 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 1288-2 was prepared by Technical Committee ISO/TC 160, Glass in building,
Subcommittee SC 2, Use considerations
ISO 1288 consists of the following parts, under the general title Glass in building — Determination of the bending
strength of glass:
 Part 1: Fundamentals of testing glass
 Part 2: Coaxial double ring test on flat specimens with large test surface areas
 Part 3: Test with specimen supported at two points (four point bending)
 Part 4: Testing of channel shaped glass
 Part 5: Coaxial double ring test on flat specimens with small test surface areas
This Standard has been based on EN 1288-2 Glass in building - Determination of the bending strength of glass" -
Part 2 : Coaxial double ring test on flat specimens with large test surface areas prepared by Technical Committee
CEN/TC 129 "Glass in building"/WG8 "Mechanical Strength".
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.

iv © ISO 2011 – All rights reserved

FDIS prEN/ISO 1288-2
Glass in building — Determination of the bending strength of
glass — Part 2: Coaxial double ring test on flat specimens with
large test surface areas
1 Scope
This International Standard specifies a method for determining the bending strength of glass for use in buildings,
excluding the effects of the edges.
The limitations of this part of this International Standard are described in ISO 1288-1.
ISO 1288-1 should be read in conjunction with this part of this International Standard.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 1288. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based on this part of ISO 1288 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain
registers of currently valid International Standards.
ISO 1288-1, Glass in building - Determination of the bending strength of glass - Part 1 : Fundamentals of
ISO 16293-1: Glass in building – Basic soda lime silicate glass products – Part 1: Definitions and general physical
and mechanical properties
ISO 48, Rubber, vulcanised or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100
IRHD)
3 Terms and definitions
For the purposes of this part of ISO 1288, the following terms and definitions apply.
3.1
bending stress
the tensile bending stress induced in the surface of a specimen
NOTE For testing purposes, the bending stress should be uniform over a specified part of the surface.
3.2
effective bending stress
a weighted average of the tensile bending stresses, calculated by applying a factor to take into account
non-uniformity of the stress field
3.3
bending strength
the tensile bending stress or effective bending stress which leads to breakage of the specimen
FDIS 1288-2
3.4
equivalent bending strength
the apparent bending strength of patterned glass, for which the irregularities in the thickness do not allow precise
calculation of the bending stress
4 Symbols (and abbreviated terms)
A Effective surface area of quasi-uniform stress m
E
Modulus of elasticity (Young's modulus) of the specimen. Pa
NOTE for soda lime silicate glass (see EN 572-1) a value of 70 GPa is used.
F
Piston force N
F Piston force upon breakage, "breaking force" N
max
F Force transmitted by the loading ring to the specimen, "ring load" N
ring
h Thickness or average thickness of specimen m
L Side length of the square specimens m
Poisson number of specimen
µ
NOTE for soda lime silicate glass (see EN 572-1) a value of 0,23 is used.
p Gas pressure on the surface area defined by the loading ring Pa
p(F) Nominal gas pressure as a function of the piston force Pa
p (F ) Nominal gas pressure upon breakage Pa
max max
r
Location co-ordinate m
r Radius of loading ring m
r Radius of supporting
...