Glass in building - Shatter properties - Requirements and assessment methods

This document gives test methods to assess the shatter properties of different types of monolithic flat glass for use in building and construction works, for which a specific fragmentation pattern is required when tested under defined conditions.
NOTE Thermally treated monolithic glass is a product for which such a requirement exists.

Glas im Bauwesen - Brucheigenschaften - Anforderungen und Bewertungsmethoden

Dieses Dokument enthält Prüfverfahren zur Bewertung der Brucheigenschaften verschiedener Arten von Einscheiben-Flachglas, die für die Verwendung in Gebäuden und Bauten vorgesehen sind und für die ein bestimmtes Bruchbild erforderlich ist, wenn sie unter festgelegten Bedingungen geprüft werden.
ANMERKUNG Thermisch behandeltes Einscheibenglas ist ein Produkt, für das eine solche Anforderung besteht.

Verre dans la construction - Comportement lors du bris - Exigences et méthodes d'évaluation

Le présent document fournit des méthodes d'essai pour évaluer le comportement lors du bris de différents types de verre plat monolithique utilisés dans le bâtiment et les travaux de construction, pour lesquels un certain type de fragmentation est nécessaire lorsqu'ils sont soumis à essai dans des conditions définies.
NOTE Ce type d’exigences existe pour le verre monolithique ayant subi un traitement thermique.

Steklo v gradbeništvu - Lastnosti loma - Zahteve in metode ocenjevanja

Ta dokument določa preskusne metode za ocenjevanje lastnosti loma različnih vrst monolitnega ploskega stekla, ki se uporablja v stavbah in gradbenih objektih ter za katero se med preskušanjem pod določenimi pogoji zahteva poseben vzorec drobljenja.
OPOMBA:   Toplotno obdelano monolitno steklo so izdelki, za katere takšna zahteva obstaja.

General Information

Status
Published
Publication Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Nov-2022
Due Date
09-Nov-2022
Completion Date
30-Nov-2022

Buy Standard

Standard
EN 17635:2023
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17635:2021
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17635:2023
01-februar-2023
Steklo v gradbeništvu - Lastnosti loma - Zahteve in metode ocenjevanja
Glass in buildig - Shatter properties - Requirements and assessment methods
Glas in Bauwesen - Brucheigenschaften - Anforderungen und Bewertungsmethoden
Verre dans la construction - Comportement lors du bris - Exigences et méthodes
d'évaluation
Ta slovenski standard je istoveten z: EN 17635:2022
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 17635:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17635:2023

---------------------- Page: 2 ----------------------
SIST EN 17635:2023


EN 17635
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2022
EUROPÄISCHE NORM
ICS 81.040.20
English Version

Glass in building - Shatter properties - Requirements and
assessment methods
Verre dans la construction - Comportement lors du bris Glas im Bauwesen - Brucheigenschaften -
- Exigences et méthodes d'évaluation Anforderungen und Bewertungsmethoden
This European Standard was approved by CEN on 30 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17635:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17635:2023
EN 17635:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 5
5 Method A. 6
5.1 Dimensions and number of test specimens . 6
5.2 Test procedure . 6
5.3 Assessment of the shatter properties . 7
5.4 Minimum values from the particle count . 7
5.5 Maximum length of longest particle . 8
6 Method B. 8
6.1 Dimensions and number of test specimens . 8
6.2 Test procedur
...

SLOVENSKI STANDARD
oSIST prEN 17635:2021
01-marec-2021
Steklo v gradbeništvu - Lastnosti drobljenja - Zahteve in metode ocenjevanja
Glass in buildig - Shatter properties - Requirements and assessment methods
Glas in Bauwesen - Brucheigenschaften - Anforderungen und Bewertungsmethoden
Verre dans la construction - Comportement lors du bris - Exigences et méthodes
d'évaluation
Ta slovenski standard je istoveten z: prEN 17635
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 17635:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17635:2021

---------------------- Page: 2 ----------------------
oSIST prEN 17635:2021


DRAFT
EUROPEAN STANDARD
prEN 17635
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2021
ICS 81.040.20
English Version

Glass in buildig - Shatter properties - Requirements and
assessment methods
Verre dans la construction - Comportement lors du bris Glas in Bauwesen - Brucheigenschaften -
- Exigences et méthodes d'évaluation Anforderungen und Bewertungsmethoden
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17635:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17635:2021
prEN 17635:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 5
5 Method A. 6
5.1 Dimensions and number of test specimens . 6
5.2 Test procedure . 6
5.3 Assessment of the shatter properties . 6
5.4 Minimum values from the particle count . 8
5.5 Maximum length of longest particle .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.