EN ISO 15912:2006/A1:2011
(Amendment)Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/Amd 1:2011)
Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/Amd 1:2011)
2010-12-01 EMA: // final draft provided to ISO/CS according to notification received in dataservice on 2010-11-30.
Zahnheilkunde - Einbettmassen und hochtemperaturbeständige Stumpfmaterialien - ÄNDERUNG 1: Anforderungen und Prüfverfahren für die Gleichheit der Expansion für Typ-1- und Typ-2-Materialien (ISO 15912:2011/Amd.1:2011)
Art dentaire - Revêtements et matériaux pour modèles réfractaires - Amendement 1: Exigence et méthode d'essai pour l'adéquation d'expansion des matériaux de Type 1 et de Type 2 (ISO 15912:2006/Amd 1:2011)
Zobozdravstvo - Polnila in refrakcijski materiali - Dopolnilo 1: Zahteve in preskusne metode za primernost ekspanzije materiala tipa 1 in tipa 2 - Dopolnilo A1 (ISO 15912:2006/A1:2011)
Ta mednarodni standard velja za zobna polnila, pritrdila in refrakcijske materiale, ne glede na naravo vezalnega sistema ali določene uporabe. Ta mednarodni standard razvršča polnila na vrste v skladu z njihovo predvideno uporabo in razrede v skladu z izgorevalnim postopkom, ki ga priporoča proizvajalec. Ta mednarodni standard določa zahteve za bistvene fizične in mehanske lastnosti materialov in preskusne metode, ki se uporabljajo za njihovo določevanje. Ta mednarodni standard prav tako vključuje zahteve za informacije in navodila, ki spremljajo vsak paket.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15912:2006/oprA1:2010
01-marec-2010
Zobozdravstvo - Polnila in refrakcijski materiali - Dopolnilo 1 (ISO 15912:2006/DAM
1:2010)
Dentistry - Casting investments and refractory die materials - Amendment 1 (ISO
15912:2006/DAM 1:2010)
Zahnheilkunde - Einbettmassen und hochtemperaturbeständige Stumpfmaterialien -
Änderung 1 (ISO 15912:2006/DAM 1:2010)
Art dentaire - Revêtements et matériaux pour modèles réfractaires - Amendement 1 (ISO
15912:2006/DAM 1:2010)
Ta slovenski standard je istoveten z: EN ISO 15912:2006/prA1
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 15912:2006/oprA1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15912:2006/oprA1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 15912:2006/oprA1:2010
EUROPEAN STANDARD
DRAFT
EN ISO 15912:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2010
ICS 11.060.10
English Version
Dentistry - Casting investments and refractory die materials -
Amendment 1 (ISO 15912:2006/DAM 1:2010)
Art dentaire - Revêtements et matériaux pour modèles Zahnheilkunde - Einbettmassen und
réfractaires - Amendement 1 (ISO 15912:2006/DAM hochtemperaturbeständige Stumpfmaterialien - Änderung 1
1:2010) (ISO 15912:2006/DAM 1:2010)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 55.
This draft amendment A1, if approved, will modify the European Standard EN ISO 15912:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15912:2006/prA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15912:2006/oprA1:2010
EN ISO 15912:2006/prA1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15912:2006/oprA1:2010
EN ISO 15912:2006/prA1:2010 (E)
Foreword
This document (EN ISO 15912:2006/prA1:2010) has been prepared by Technical Committee ISO/TC 106
“Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by
DIN.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 15912:2006/DAM 1:2010 has been approved by CEN as a EN ISO 15912:2006/prA1:2010
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 15912:2006/oprA1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 15912:2006/oprA1:2010
DRAFT AMENDMENT ISO 15912:2006/DAmd 1
ISO/TC 106/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2010-01-21 2010-06-21
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Dentistry — Casting investments and refractory die materials
AMENDMENT 1
Art dentaire — Revêtements et matériaux pour modèles réfractaires
AMENDEMENT 1
ICS 11.060.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna
...
SLOVENSKI STANDARD
SIST EN ISO 15912:2006/A1:2011
01-oktober-2011
Zobozdravstvo - Polnila in refrakcijski materiali - Dopolnilo 1: Zahteve in
preskusne metode za primernost ekspanzije materiala tipa 1 in tipa 2 - Dopolnilo
A1 (ISO 15912:2006/A1:2011)
Dentistry - Casting investments and refractory die materials - Amendment 1:
Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials
(ISO 15912:2006/A1:2011)
Zahnheilkunde - Einbettmassen und hochtemperaturbeständige Stumpfmaterialien -
Änderung 1 (ISO 15912:2006/A1:2011)
Art dentaire - Revêtements et matériaux pour modèles réfractaires - Amendement 1:
Exigence et méthode d'essai pour l'adéquation d'expansion des matériaux de Type 1 et
de Type 2 (ISO 15912:2006/A1:2011)
Ta slovenski standard je istoveten z: EN ISO 15912:2006/A1:2011
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 15912:2006/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15912:2006/A1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 15912:2006/A1:2011
EUROPEAN STANDARD
EN ISO 15912:2006/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 11.060.10
English Version
Dentistry - Casting investments and refractory die materials -
Amendment 1: Requirement and test method for adequacy of
expansion of Type 1 and Type 2 materials (ISO
15912:2006/Amd 1:2011)
Art dentaire - Revêtements et matériaux pour modèles Zahnheilkunde - Einbettmassen und
réfractaires - Amendement 1: Exigence et méthode d'essai
hochtemperaturbeständige Stumpfmaterialien - Änderung 1
pour l'adéquation d'expansion des matériaux de Type 1 et (ISO 15912:2006/Amd 1:2011)
de Type 2 (ISO 15912:2006/Amd 1:2011)
This amendment A1 modifies the European Standard EN ISO 15912:2006; it was approved by CEN on 14 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15912:2006/A1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15912:2006/A1:2011
EN ISO 15912:2006/A1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15912:2006/A1:2011
EN ISO 15912:2006/A1:2011 (E)
Foreword
This document (EN ISO 15912:2006/A1:2011) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by
DIN.
This Amendment to the European Standard EN ISO 15912:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and
conflicting national standards shall be withdrawn at the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15912:20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.