EN 14085:2010

Resilient floor coverings - Specification for floor panels for loose laying

This European Standard specifies requirements and test methods for floor panels, which have surface layers consisting of resilient floor covering. The floor panels are considered suitable for domestic and commercial levels of use.
This European Standard is not applicable to floor panels that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas.
This European Standard also specifies the requirements for marking and packaging.

Elastische Bodenbeläge - Spezifikation für Fußbodenpaneele für lose Verlegung

Diese Europäische Norm legt Anforderungen und Prüfverfahren an Fußbodenpaneele fest, deren Ober-schichten aus elastischen Bodenbelägen bestehen. Die Fußbodenpaneele werden für private und gewerb¬liche Bereiche als geeignet angesehen.
Diese Europäische Norm gilt nicht für Bereiche, die einer häufigen Nässe ausgesetzt sind, wie z. B. Badezimmer, Waschräume und Saunen.
Diese Europäische Norm legt auch die Anforderungen an Kennzeichnung und Verpackung fest.

Revêtements de sol résilients - Spécification des panneaux de plancher pour pose flottante

La présente Norme européenne spécifie les exigences et les méthodes d’essai relatives aux panneaux de plancher dont les couches de surface sont constituées d’un revêtement de sol résilient. Ces panneaux de plancher sont considérés comme étant appropriés à des niveaux d’utilisation domestique et commerciale.
La présente Norme européenne ne s’applique pas aux panneaux de plancher soumis fréquemment à des conditions de forte humidité, comme les salles de bain, les buanderies et les saunas.
La présente norme européenne comprend également les exigences relatives au marquage et à l’emballage.

Netekstilne talne obloge - Specifikacija talnih plošč za prosto položeno inštalacijo

Ta evropski standard določa zahteve in preskusne metode za talne plošče, katerih vrhnje plasti so sestavljene iz odpornih talnih oblog. Talne plošče veljajo za primerne za domačo in gospodarsko stopnjo uporabe.
Ta evropski standard ne velja za talne plošče, ki so izpostavljene pogostemu močenju, kot so kopalnice, pralnice in savne.
Ta evropski standard prav tako določa zahteve za označevanje in pakiranje.

General Information

• Status: Withdrawn
• Publication Date: 13-Apr-2010
• Withdrawal Date: 09-Oct-2018
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134/WG 7 - Resilient floor coverings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Oct-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14085:2011 - Resilient floor coverings - Specification for floor panels for loose laying

Relations

• Replaces: EN 14085:2003 - Resilient floor coverings - Specification for floor panels for loose laying
• Effective Date: 17-Apr-2010
• Replaced By: EN ISO 20326:2018 - Resilient floor coverings - Specification for floor panels/assembly for loose laying (ISO 20326:2016)
• Effective Date: 27-Dec-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elastische Bodenbeläge - Spezifikation für Fußbodenpaneele für lose VerlegungRevêtements de sol résilients - Spécification des panneaux de plancher pour pose flottanteResilient floor coverings - Specification for floor panels for loose laying97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:EN 14085:2010SIST EN 14085:2011en,fr,de01-november-2011SIST EN 14085:2011SLOVENSKI
STANDARDSIST EN 14085:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14085
April 2010 ICS 97.150 Supersedes EN 14085:2003English Version
Resilient floor coverings -Specification for floor panels for loose laying
Revêtements de sol résilients - Spécification des panneaux de plancher pour pose flottante
Elastische Bodenbeläge - Spezifikation für Fußbodenpaneele für lose Verlegung This European Standard was approved by CEN on 27 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14085:2010: ESIST EN 14085:2011

Determination of flatness . 11A.1 Sampling . 11A.2 Conditioning . 11A.3 Apparatus . 11A.3.1 Dial gauge . 11A.3.2 Rigid surface . 11A.3.3 Thickness gauge . 11A.4 Procedure . 12A.4.1 Determination of width flatness (fw) . 12A.4.2 Determination of length flatness (fl). 13A.5 Recording and expression of results . 14A.5.1 General . 14Annex B (normative)
Determination of openings and height differences between floor panels . 15B.1 Sampling . 15B.2 Conditioning . 15B.3 Apparatus . 15B.3.1 Thickness gauges . 15B.3.2 Calliper gauge . 15B.3.3 Test surface . 15B.4 Procedure . 15B.4.1 Assembly . 15B.4.2 Determination of openings between panels . 16B.4.3 Determination of height difference . 16B.5 Calculation and expression of results . 16Annex C (normative)
Determination of dimensional variations caused by changes in humidity . 17C.1 General . 17C.2 Sampling . 17C.3 Conditioning . 17C.4 Procedure . 18C.5 Calculation and expression of results . 18Annex D (normative)
Test report for tests carried out in accordance with Annexes A, B and C . 19Annex E (informative)
Optional properties . 20Bibliography . 21 SIST EN 14085:2011

1 Scope This European Standard specifies requirements and test methods for floor panels, which have surface layers consisting of resilient floor covering. The floor panels are considered suitable for domestic and commercial levels of use. This European Standard is not applicable to floor panels that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas. This European Standard also specifies the requirements for marking and packaging. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references the latest edition of the referenced document (including any amendments) applies. EN 309:2005, Particleboards – Definition and classification EN 316:2009, Wood fibre boards – Definition, classification and symbols EN 424, Resilient floor coverings – Determination of the effect of simulated movement of a furniture leg EN 425, Resilient and laminate floor coverings – Castor chair test EN 427, Resilient floor coverings – Determination of the side length, squareness and straightness of tiles EN 428, Resilient floor coverings – Determination of overall thickness EN 548, Resilient floor coverings – Specification for plain and decorative linoleum EN 649, Resilient floor coverings – Homogeneous and heterogeneous polyvinyl chloride floor coverings – Specification EN 651, Resilient floor coverings — Polyvinyl chloride floor coverings with foam layer – Specification EN 652, Resilient floor coverings – Polyvinyl chloride floor coverings with cork-based backing – Specification EN 653, Resilient floor coverings – Expanded (cushioned) polyvinyl chloride floor coverings – Specification EN 655, Resilient floor coverings – Tiles of agglomerated composition cork with polyvinyl chloride wear layer – Specification EN 669:1997, Resilient floor coverings – Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity EN 685, Resilient, textile and laminate floor coverings - Classification EN 1817, Resilient floor coverings – Specification for homogeneous and heterogeneous smooth rubber floor coverings EN 12104, Resilient floor coverings – Cork floor tiles – Specification EN 12199, Resilient floor coverings – Specifications for homogeneous and heterogeneous relief rubber floor coverings SIST EN 14085:2011

floor panel product generally of rectangular form consisting of a compact layer of a substrate and a surface layer of a resilient floor covering 3.2
substrate core material of the floor panel, which is tongued and grooved or otherwise constructed to allow the panels to be assembled together using an appropriate glue or by other assembling techniques. NOTE 1 The substrate might include a backing. NOTE 2 The substrate is generally a particleboard, as defined in EN 309, or a Medium Density Fibreboard or High Density Fibreboard (MDF or HDF) as defined in EN 316. 3.3 surface layer upper decorative layer of one of the specified resilient floor coverings, which is bonded to the substrate directly or as total product and is intended to be the visible side when the floor is inst
...