EN 10255:2004+A1:2007
(Main + Amendment)Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
This document specifies the requirements for circular non-alloy steel tubes suitable for welding and threading and provides a number of options for the finish of tube ends and coatings. This document covers tubes of specified outside diameter 10,2 mm to 165,1 mm (thread size 1/8 to 6) in two series, medium and heavy, and three types of designated thicknesses.
NOTE Tubes manufactured according to this document can be used for the conveyance of fluids as well as for other applications.
Rohre aus unlegiertem Stahl mit Eignung zum Schweißen und Gewindeschneiden - Technische Lieferbedingungen
Dieses Dokument legt die Anforderungen an kreisförmige Rohre aus unlegiertem Stahl mit Eignung zum Schweißen und Gewindeschneiden fest und sieht eine Reihe von Optionen für die Rohrendenbeschaffenheit und für Beschichtungen und Überzüge vor. Dieses Dokument gilt für Rohre mit 10,2 mm bis 165,1 mm Nenn-Außendurchmesser (Gewindegröße 1/8 bis 6) für zwei Reihen, mittlere und schwere Reihe, und drei weitere Rohrarten mit festgelegter Wanddicke.
ANMERKUNG Nach diesem Dokument gefertigte Rohre können für den Transport von flüssigen und gasförmigen Medien und für andere Anwendungsgebiete verwendet werden.
Tubes en acier non allié soudables et filetables - Conditions techniques de livraison
Le présent document spécifie les prescriptions relatives aux tubes ronds en acier non allié soudables et filetables et fournit un certain nombre d’options relatives à la finition des extrémités des tubes et à leurs revêtements. Le présent document s'applique aux tubes dont le diamètre extérieur spécifié est compris entre 10,2 mm et 165,1 mm (dimension de filetage 1/8 à 6), appartenant à deux séries, moyenne et forte et trois types d'épaisseurs données.
NOTE Les tubes fabriqués conformément au présent document peuvent être utilisés pour le transport de fluides de même que pour d’autres applications
Nelegirane jeklene cevi za varjenje in vrezovanje navojev – Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditionsSRJRMLTubes en acier non-allié filetables et soudables - Conditions techniques de livraisonRohre aus unlegiertem Stahl mit Eignung zum Schweissen und Gewindeschneiden - Technische LieferbedingungenTa slovenski standard je istoveten z:EN 10255:2004+A1:2007SIST EN 10255:2004+A1:2007en;fr;de23.040.10Železne in jeklene ceviIron and steel pipesICS:SIST EN 10255:20041DGRPHãþDSLOVENSKI
STANDARDSIST EN 10255:2004+A1:200701-junij-2007
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10255:2004+A1
April 2007 ICS 23.040.10
Supersedes EN 10255:2004English Version
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
Tubes en acier non-allié filetables et soudables - Conditions techniques de livraison
Rohre aus unlegiertem Stahl mit Eignung zum Schweißen und Gewindeschneiden - Technische Lieferbedingungen This European Standard was approved by CEN on 27 May 2004 and includes Amendment 1 approved by CEN on on 5 March 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10255:2004+A1:2007: E
Correlation between specified outside diameter, thread size, and nominal diameter.17 Annex B (normative)
Types of tubes with wall thickness different from medium and heavy series.18 B.1 General.18 B.2 Requirements.18 B.3 Marking.18 Annex ZA (informative)
!!!!Clauses of this European Standard addressing the provisions of the EC Construction Products Directive for applications covered by Mandate M/131.20 ZA.1 Scope and relevant characteristics.20 ZA.2 Procedure for attestation of conformity of pipes.21 ZA.2.2 Declaration of conformity.22 ZA.3 CE marking and labelling.23
1 Scope This document specifies the requirements for circular non-alloy steel tubes suitable for welding and threading and provides a number of options for the finish of tube ends and coatings.
This document covers tubes of specified outside diameter 10,2 mm to 165,1 mm (thread size 1/8 to 6) in two series, medium and heavy, and three types of designated thicknesses. NOTE Tubes manufactured according to this document can be used for the conveyance of fluids as well as for other applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.